ReliaBilt 5144304 Installation guide

Brand: ReliaBilt

Model: 5144304

Type: Installation guide

ReliaBilt 5144304 is a solar-powered LED address sign designed to provide clear visibility of your house number at night. It features automatic ON/OFF operation based on sunset and sunrise, ensuring easy identification for emergency services, couriers, and visitors. Installation involves selecting a suitable location with adequate sunlight, drilling holes, and securing the sign with screws and anchors. The sign also includes a USB charging port for extended periods without direct sunlight.

RELIABILT

# 5144304

SOLAR LED ADDRESS SIGN

ABCDEFGHIJKLMN

OPQRSTUVWXYZ

0123456789

INSTALLATION AND HOW TO USE

Locate the best location for your DIY Solar LED Address Sign. For best results, it is recommended that the sign is placed

where it receives adequate sunlight throughout the day.

The light turns ON and Off automatically at sunset and sunrise.

Offering high visibility at night, this solar LED sign helps emergency workers, couriers, and visitors to quickly find your house.

This Solar Powered LED Address Sign is equipped with a USB charging port if experiencing an extended period without direct

sunlight.

SETTING UP AND INITIATION

Package Included:

1 - Address sign plaque

4 - Sets of vinyl numbers 0-9

1 - Set of vinyl letters A-Z

3 - Guide templates

How To Install

1. Clean white board.

5. Once you have located the desired placement for the

sign, use the Install Guide Card to mark the correct

position for two screws. For best results, install sign

where it can receive direct sunlight.

6. Drill two holes using a 1/4" drill bit.

2. Select the alignment card that matches your need.

3. Place the alignment card on the white board.

4. Align characters starting at the bottom

and paste upward.

7. Tap the anchor into the hole you drilled.

8. Drive the screw into the anchor.

* Don't drive the screw all the way in. Leave a small distance

between the screw head and the surface of the wall for hanging.

9. Press switch to Auto.

10. Install sign where it gets direct sunlight.

11. Hang sign on the screws.

2 - Screws& anchors

1 - Install guide card

1 - Charging cable

SECURITY INFORMATION

CAUTIONS: The packing contains small parts that could be swallowed by children.

Keep the packaging material away from children and pets (danger of suffocation).

This solar powered address sign is not a toy.

For safety reasons it is not allowed to rebuild and/or to change the solar address sign luminaire.

Clean the solar module regularly with a damp towel.

Do not use any type of solvent or detergent for cleaning.

Please pay attention to an appropriate start-up. Never attempt to repair defective parts yourself. Repairs must be carried

out only by qualified specialist.

Charging cable included, close the soft cover tightly after charging to prevent the infiltration of rainwater

Ø1/4"

Ø4mm

Ø6mm

12. If experiencing an extended period without direct

sunlight, you can charge the sign using the type-c

charging port. After charging is completed, insert

the soft cover to prevent exposure to moisture or

dirt and debris.

ReliaBilt 5144304 Installation guide

ReliaBilt 5144304 Installation guide

ReliaBilt 5144304 Installation guide

Related papers

Other documents