2. HARVEST
  3. Nodestream Mini Unit
Nodestream Mini Unit

HARVEST Nodestream Mini Unit User guide

  • Hello! I've reviewed the Quick Start Guide for the Nodestream Mini. This document outlines its features as a configurable video and audio streaming device, with details on its hardware connections, user interface elements like the PTT and volume buttons, and basic troubleshooting steps. I'm here to help you understand how to use your device. Please ask me any questions you may have about its functionality and set up.
  • What is the Nodestream Mini?
    What is the purpose of the PTT button?
    What does a red status LED indicate?
™
®
Quick Start Guide
®
2
OVERVIEW
In the Box
12V PSU
Power Cable
(Region specic)
Mini Keyboard/Mouse
2 x HDMI Cable
USB Speakerphone
Video and two-way audio streaming solution
Nodestream Mini Unit WiFi Antenna
NSM
(or other Harvest Encoder)
NSM
(or other Harvest Decoder)
Thank you for choosing Harvest Technology
Please read these instructions carefully before using this product, and save this
quick start guide for future use. See the User Manual for full details via the QR
code on the back page.
Video Source Monitor
®
3
OVERVIEW
Rear Connections
User Interface
USB-A
Ethernet
HDMI
OUT
HDMI
IN Power
Socket
WiFi
Antenna
Status (LED
Indicator)
PPT (Push To Talk) button
with LED Ring Indicator
Volume | Start/Stop
software with LED Ring
Indicator
Nodestream Mini
The Nodestream Mini (NSM) is a video and audio streaming device that can be
congured either as an encoder or decoder. Ensure adequate spacing to allow
cooling air to travel through vents as shown by the arrows.
®
4
START UP
1
2
Power on the device (from mains)
INFINITY NODESTREAM ENCODER
Device Conguration (if required)
Typical Boot Sequence
Connect a monitor, keyboard/
mouse
An on screen GUI displays, for
further information - see User
Manual
Press and hold VOL button (see
next page) or select Launch
Nodestream to start software
Refer to the Nodester application for device status and connection
management
Encoder (without monitor connected)
Decoder (with monitor connected)
4
3
“Connecting to
Nodestream
server 0%”
“Waiting for
Nodestream
connections”
System Boot
Status: Blue
PTT: Off
VOL: White
System Ready
Status: Blue
PTT: Off
VOL: Blue
Software Running
Status: Blue
PTT: Blue
VOL: Blue
System boot GUI displays Launch
Nodestream
% must increase
else network error
For encoders only, the software starts automatically if an external
monitor is not connected.
Blue PTT LED indicates the software is running.
Indicates if NSM is congured as an
encoder or decoder
Networking
Wifi
Sound
Display
Launch Nodestream
?i
®
5
OPERATION
Status LED
PTT (Push To Talk)
VOL (Volume) VOL (Start/Stop Software)
Mute
Decrease volume until
LED is rotating
Increase volume
Turn clockwise
Decrease volume
Turn counter-clockwise
LED Ring
+
-
+
-
Press to toggle through
each audio device
(Blue)
(Red)
(Green)
Speaker
Microphone
Monitor
Press and Hold
Open Mic
Stop Software
Start Software
Start talking
Press 3 times
to open mic
Press &
Hold VOL
Press &
Hold VOL
Release
when PTT
Release
when PTT
(pulsing)
(pulsing)
LED
Red
LED
Red
LED
White
LED
White
LED
Off
LED
Blue
LED
Green
LED
Green
Press for 1
sec to mute
Release to
mute
(Blue)
(Green)
(Red)
Power On
Video Streaming
No Network
Software not running
Software running
Audio connection active, mic muted
Mic open
(Off)
(Blue)
(Green)
(Red)
Troubleshooting
Issue Cause Resolution
Device not powering. AC or DC not connected.
Faulty PSU.
Conrm AC connected to PSU (LED on PSU is
illuminated).
Conrm DC connected correctly at rear of
device.
Video sources not displaying.
(When in encoder mode)
Source(s) not connected or
powered on.
Conrm video source(s) connected and
powered on.
No display output. Video output device not
connected or powered on.
Conrm video output device connected and
powered on.
No network -
“Connecting to Nodestream
server 0%” message displayed
and status LED is red.
No connection to server. Check Ethernet cable or WiFi is connected.
Ensure required rewall ports settings are
correct (see User Manual).
Check network settings, contact your
network administrator to diagnose network
issues.
®
Contact and Support
suppor[email protected]
User Resources
All rights reserved. This document is the property of Harvest Technology Group. No part of this
publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means,
electronic, photocopy, recording or otherwise without the written consent of the Group Chief Executive
Ofcer of Harvest Technology Group.
Harvest Technology Group Limited
Technology Park, 7 Turner Ave, Bentley WA 6102
Australia
www.harvest.technology
HTG-TEC-GUI-007 R0
/