FS S3900 Series User guide

S3900 Series
Brand
FS
Model
S3900 Series
Category
Networking
Type
User guide

FS S3900 Series switches are ideal for SMBs and enterprises seeking reliable, secure, and scalable networking solutions. With its comprehensive Layer 2 and Layer 3 features, the FS S3900 Series delivers exceptional performance and flexibility for a wide range of applications, including:

  • Enterprise and data center networks: The S3900 Series provides a robust foundation for enterprise networks, offering scalable and reliable connectivity for servers, workstations, and other devices.

  • SMB networks: The S3900 Series is a cost-effective solution for small and medium-sized businesses, providing advanced features and performance without breaking the bank.

FS S3900 Series switches are ideal for SMBs and enterprises seeking reliable, secure, and scalable networking solutions. With its comprehensive Layer 2 and Layer 3 features, the FS S3900 Series delivers exceptional performance and flexibility for a wide range of applications, including:

  • Enterprise and data center networks: The S3900 Series provides a robust foundation for enterprise networks, offering scalable and reliable connectivity for servers, workstations, and other devices.

  • SMB networks: The S3900 Series is a cost-effective solution for small and medium-sized businesses, providing advanced features and performance without breaking the bank.

S3900 SERIES SWITCHES SOFTWARE UPGRADE GUIDE
www.fs.com 1
S3900 SERIES SWITCHES SOFTWARE UPGRADE GUIDE
www.fs.com
I
Contents
1. Introduction to Version Upgrade.................................................................................................................................. 1
2. CLI Upgrade...................................................................................................................................................................... 1
2.1 Network Topology.........................................................................................................................................................................................1
2.2 Configuration Steps...................................................................................................................................................................................... 1
3. Web Upgrade....................................................................................................................................................................3
3.1 Network Topology.........................................................................................................................................................................................3
3.2 Configuration Steps...................................................................................................................................................................................... 3
S3900 SERIES SWITCHES SOFTWARE UPGRADE GUIDE
www.fs.com
1
1. Introduction to Version Upgrade
When new features are added or the original performance needs to be optimized and the current running version is out of date, the
device needs to be upgraded. In this case, you need to load a high version of the system software, upgrade through the CLI interface,
WEB interface, and restart the device.
2. CLI Upgrade
2.1 Network Topology
Figure 1 PC connection switch page
2.2 Configuration Steps
(1) Connection Equipment
Connect the PC and the switch to the network cable and the console port. Connect one end of the RJ-45 network cable to the network
card interface of the PC and the other end to the network port of the SW. Connect one end of the console c able USB to the USB port
of the PC. One end of the RJ-45 is connected to the console port on the front panel of the switch.
(2) Download Configuration Software
After the connection is completed, there we recommend the super terminal, putty or Secure CRT tool to configure the switch.
(3) Switch on and Use Login Software
Energizing the switch, then open the installed login software, select the serial port of login mode, port through the device manager to
determine. Baud rate :115200, Data bits: 8, Parity: None, Stop bits: 1. (Reference below).
NOTE: COM Number can be viewed through device manager. (right click on my computer.>manage>device manager>port (COM and
LPT) If it displays an unrecognized USB device, please download and install the corresponding driver.
Figure 2 Login cli configuration page
(4) Login Switch
After completing the above steps, hitting the Enter key of the keyboard will prompt you to enter the account password. At this time,
enter the default username and password admin/admin to log in to the switch.
(5) Upgrade Software
S3900 SERIES SWITCHES SOFTWARE UPGRADE GUIDE
www.fs.com
2
After logging in to the switch, open the installed TFTP upload software, specify the server root directory in its options, and put the files
to be uploaded into this directory.
Figure 3 TFTP server configuration page
(6) Upgrade Image
NOTE: Please pay attention to the red part below. To upgrade each device in the stacking, you need to specify the unit id of the device
in the stackingse the following commands in sequence to upgrade the stack members.
FS#copy tftp file
Copy to which unit: <1-6>: 1
//The unit id of the specified device to be upgraded
TFTP server IP address: 192.168.1.22
Choose file type:
1. config; 2. image: 2
Source file name: S3900-24T4S-MR-V0171.bin
Destination file name: S3900-24T4S-MR-V0171.bin
Flash programming started.
Flash programming completed.
Success.
(7) Application System File
FS(config)#boot system image:S3900-24T4S-MR-V0171.bin
(8) Reboot the device
FS#restart
System will be restarted. Continue <y/n>? y
S3900 SERIES SWITCHES SOFTWARE UPGRADE GUIDE
www.fs.com
3
3. Web Upgrade
3.1 Network Topology
Figure 1 PC connection switch page
3.2 Configuration Steps
(1) Enable web services
FS#configure terminal
FS(config)#server https enable
(2) Login WEB
Enter the IP address of the management interface in the URL field of the browser: 192.168.1.1, and then enter the default username
and password: admin/admin.
Figure 2 Login web page
S3900 SERIES SWITCHES SOFTWARE UPGRADE GUIDE
www.fs.com
4
After successful login, the“Monitor”page will appear , as shown in figure 3.
Figure 3 Monitor page
(3) File Copy Page
After entering the WEB interface of the switch, click "System Management > File Management", and then click "Copy" button to enter
the page of file copy.
Figure 4 Upgrade Image page
(4) Upload File
Follow the steps below to upload the upgrade file:
• Click the drop-down box to select“Copy Type”as “HTTP Upload”.
• Click on the drop-down box to select“File Type”as “Image”.
• Click on the drop-down box to select“File Type”as “Image”.
• Click on“Choose File” to select the upgrade file.
• Click the drop-down box to select the“Destination File Name” as "S3900-24T4S-MR-0424.bin".
Warning: When configuring and operating system files, power off is strictly prohibited. Otherwise, the equipment may be abnormal
and unable to start.
S3900 SERIES SWITCHES SOFTWARE UPGRADE GUIDE
www.fs.com
5
Figure 5 Upload file page
(5) Application System File
Clicking on the "Boot" button will bring up the boot file selection window.
Figure 6 Click the "Boot" button
Select the file you just uploaded and click the "Apply" button to apply the system file.
Figure 7 Apply Image page
S3900 SERIES SWITCHES SOFTWARE UPGRADE GUIDE
www.fs.com
6
(6) Reboot the device
Click on "System Reboot" to enter the System Reboot page, click on the drop-down box to select "Reset Mode" as "Immediately", click
on the "Apply" button, and the device will reboot.
Figure 8 Device reboot page
(7) Login New WEB
After upgrading the Image, repeat step (1) and you can log back into the Web interface.
Figure 9 New login page
Enter the default username and password: admin/admin and the “Monitor ” page will appear, as you can see in Figure 12. Image's
version is the latest update.
S3900 SERIES SWITCHES SOFTWARE UPGRADE GUIDE
www.fs.com
7
Figure 10 New monitor page
NOTE:
(1)After the version upgrade, the browser cache needs to be cleared, otherwise the previous cache will affect the current use of the
Web.
(2)After the device version is upgraded, users are advised not to rollback the version. If you want to roll back the version, you must first
specify the configuration file that the device will start next time as the factory configuration file, then delete all the remaining
configuration files, and then restart the device.
S3910 SERIES SWITCHES DATASHEET
www.fs.com 10
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10

FS S3900 Series User guide

S3900 Series
Brand
FS
Model
S3900 Series
Category
Networking
Type
User guide

FS S3900 Series switches are ideal for SMBs and enterprises seeking reliable, secure, and scalable networking solutions. With its comprehensive Layer 2 and Layer 3 features, the FS S3900 Series delivers exceptional performance and flexibility for a wide range of applications, including:

  • Enterprise and data center networks: The S3900 Series provides a robust foundation for enterprise networks, offering scalable and reliable connectivity for servers, workstations, and other devices.

  • SMB networks: The S3900 Series is a cost-effective solution for small and medium-sized businesses, providing advanced features and performance without breaking the bank.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents