FS COM AC-7072 User guide

ENTERPRISE WIRELESS LAN CONTROLLER

V1.0

Quick Start Guide

Quick-Start Anleitung

Guide de Démarrage Rapide

AC-7072

Reset

Console USB

1/MGMT 24683 57

1F 3F 5F 7F2F 4F 6F 8F

1F 3F

2F

SFP+

4F

AC-7072

CONTRÔLEUR LAN SANS FIL POUR ENTREPRISE

ENTERPRISE WIRELESS LAN CONTROLLER

1

Introduction

EN

Thank you for choosing the enterprise wireless LAN controller. This guide is designed to familiarize you

with the layout of the wireless LAN controller and describes how to deploy the wireless LAN controller

in your network.

AC-1004

AC-7072

Console WAN DC1 2 3 4

AC-1004

RST

PWR

SYS

WAN

1 2 3 4

LAN

PoE

53.5V

1/MGMT 2 4 6 83 5 7 1F 3F 5F 7F2F 4F

1F 3F

2F

SFP+

4F

6F 8F

Reset

Console

AC-7072

USB

2

M4 Screw x4 Mounting Bracket x2

Accessories

EN

AC-7072

AC-1004

Rubber Pad x4

Console Cable x1 Grounding Cable x1Power Cord x1

Power Adapter x1 Power Adapter x1 Screw Anchor x2

3

Front Panel Port

Front Panel Button

Ports Description

POWER

WAN

LAN1-4

53.5V DC power port

Wide Area Network interface

First Local Area Network interface

CONSOLE

USB

A RJ45 console port for serial management

A USB management port for software and conguration backup

and oine software upgrade

Buttons Description

RESET Press it for more than 3s: Restore to Factory Default Settings.

Press it for less than 3s: Restart the controller.

EN

Hardware Overview

AC-1004

Console WAN DC1 2 3 4

AC-1004

RST

PWR

SYS

WAN

1 2 3 4

LAN

PoE

53.5V

RST SYS PoE USB

PWR WAN LAN1-4

LAN1-4

Console WAN POWER

4

Front Panel LED

Back Panel

WAN

Port 100/10M Link UpSolid Orange

Blinking Orange Port 100/10M Data Transceiver

LAN

SYS

PWR

POE

O

Blinking Green

Solid Orange

Solid Green

Blinking Green

Solid Green

O

Solid Green

O

The system is abnormal.

The system is initializing.

The initialization process is complete.

The controller is powered o.

The controller is powered on.

POE is powered o.

POE is powered on.

No Port Llink

Port 1000M Link Up

Port 1000M Data Transceiver

Port 100/10M Link UpSolid Orange

Blinking Orange Port 100/10M Data Transceiver

Blinking Green

Solid Green

O No Port Link

Port 1000M Link Up

Port 1000M Data Transceiver

LEDs State Description

EN

Grounding Point

5

Front Panel Port

Ports Description

CONSOLE

USB

RJ45

A RJ45 console port for serial management

A USB management port for software and conguration backup

and oine software upgrade

10/100/1000Base-T ports for Ethernet connection

SFP

SFP+

Optical&Electrical Multiplexing 1000Base-X SFP port for 1G

connection

10GBASE-SR/LR SFP+ port for 10G connection

Front Panel Button

Buttons Description

RESET Restore to Factory Default Settings.

EN

AC-7072

Console

USB RJ45

SFP

SFP+SFP

1/MGMT 2 4 6 83 5 7 1F 3F 5F 7F2F 4F 6F 8F

1F 3F

2F

SFP+

4F

Reset

Console

AC-7072

USB

6

Front Panel LED

Back Panel

EN

SYSTEM

1-8F

Electrical

Indicator

1F-8F 1G

Optical

Indicator

1F-4F 10G

Optical

Indicator

The system is initializing.Blinking Green

1G LINKSolid Green

LinkBlinking Green

Data TransceiverSolid Green

Power Grounding Point

Data TransceiverSolid Green

100/10M LINKSolid Yellow

Data TransceiverBlinking

The initialization process is complete.Solid Green

The system sends out an alarm.Solid Red

LEDs State Description

7

Mounting the Wireless LAN Controller

Desk Mounting

Installation Requirements

Before you begin the installation, make sure that you have the followings:

EN

Phillips screwdriver.

Standard-sized, 19" wide rack with a minimum of 1U height available.

Category 5e or higher RJ-45 Ethernet cables and ber optical cables for connecting network

devices.

Site Environment

Make sure the installation site is dry and at.

Keep the controller far away from the heat source.

Ensure that the controller is properly grounded.

Wear an anti-static wrist strap during installation and maintenance.

Keep the controller and installation tools away from walkways.

Use UPS (Uninterruptible Power Supply) to prevent power failure and other interference.

1. Attach four rubber pads to the bottom.

2. Place the controller on a desk.

AC-1004

RST

PWR

SYS

WAN

1 2 3 4

LAN

PoE

Console WAN DC1 2 3 4 53.5V

8

EN

Rack Mounting

1. Secure the mounting brackets on the two sides of the controller with six M4 screws.

2. Attach the contro ller to the rack using four M6 screws and cage nuts.

AC-7072

1F 3F

2F

SFP+

4F

1F 3F

2F

SFP+

4F

AC-7072

9

Connecting the Power

EN

Grounding the Controller

1. Connect one end of the grounding cable to a proper earth ground, such as the rack in which the

controller is mounted.

2. Secure the grounding lug to the grounding point on the controller back panel with the washers and

screws.

AC-7072

10

Connecting the Console Ports

Connecting the RJ45 Ports

EN

1. Plug the AC power cord into the power port on the back panel.

2. Connect the other end of the power cord to an AC power source.

1. Insert the RJ45 connector into the RJ45 console port on the front panel.

2. Connect the DB9 female connector of the console cable to RS-232 serial port on the computer.

Console

Reset

USB

1/MGMT 24683 57

1F 3F 5F 7F2F 4F 6F 8F

Console

Reset

USB

1/MGMT 24683 57

1F 3F 5F 7F2F 4F 6F 8F

11

NOTE: The AC-1004 can’t be mounted in the rack. Other detailed steps of its installation are

the same as the AC-7072.

EN

1. Connect an Ethernet cable to the RJ45 port of a computer or other network devices.

2. Connect the other end of the Ethernet cable to the RJ45 port of the controller.

1. Plug the compatible SFP transceiver into the SFP port.

2. Connect a ber optic cable to the ber transceiver. Then connect the other end of the cable to

another ber device.

Connecting the SFP Ports

AC-7072

Console

Reset

USB

1/MGMT 24683 57

1F 3F 5F 7F2F 4F 6F 8F

12

Step 1: Connect a computer to the controller's console port using the supplied console cable.

Step 2: Start the terminal simulation software such as HyperTerminal on the computer.

Step 3: Set the parameters of the HyperTerminal: 9600 bits per second, 8 data bits, no parity, 1 stop bit

and no ow control.

Step 4: After setting the parameters, click Connect to enter.

x

Quick Connect

Protocol: Serial

Flow Control

DTR/DSR

RTS/CTS

XON/XOFF

Save sessionShow quick connect on startup

The port may be manually entered or selected from the list.

Open in a tab

Connect Cancel

COM3

9600

8

None

1

Port:

Baud rate:

Data bits:

Parity:

Stop bits:

Name of pipe:

Conguring the Wireless LAN Controller

Conguring the Controller Using the Console Port

EN

1. Check if the network cable is intact.

2. Check if the hardware connection is correct.

3. The system status indicator on the device panel and the NIC indicator on the computer must be lit.

4. The computer's IP address setting is correct.

Troubleshooting

The Screen Displays Request Timed Out

Online Resources

Download

Help Center

Contact Us

https://www.fs.com/products_support.html

https://www.fs.com/service/fs_support.html

https://www.fs.com/contact_us.html

Product Warranty

FS ensures our customers that if there are any damage or faulty items due to our workmanship, we

will oer a free return within 30 Days from the day you receive your goods. We will also oer free

software update service. This excludes any custom made items or tailored solutions.

Return: If you want to return item(s), information on how to return can be found at

https://www.fs.com/policies/day_return_policy.html

Warranty: This product enjoys 3 years limited warranty against defect in materials or

workmanship. For more details about warranty, please check at

https://www.fs.com/policies/warranty.html

3

EN

13

14

Einführung

DE

Vielen Dank, dass Sie sich für den Enterprise Wireless LAN Controller entschieden haben. Diese

Anleitung soll Sie mit dem Aufbau des Wireless LAN Controllers vertraut machen und erklärt, wie Sie

den Wireless LAN Controller in Ihrem Netzwerk einsetzen.

AC-1004

AC-7072

Console WAN DC1 2 3 4

AC-1004

RST

PWR

SYS

WAN

1 2 3 4

LAN

PoE

53.5V

1/MGMT 2 4 6 83 5 7 1F 3F 5F 7F2F 4F

1F 3F

2F

SFP+

4F

6F 8F

Reset

Console

AC-7072

USB

15

M4-Schraube x4 Montagehalterung x2

Zubehör

DE

AC-7072

AC-1004

Gummipad x4

Konsolenkabel x1 Erdungskabel x1

Netzkabel x1

Netzadapter x1 Netzadapter x1 Schraubanker x2

Console WAN DC1 2 3 4

AC-1004

RST

PWR

SYS

WAN

1 2 3 4

LAN

PoE

53.5V

RST SYS PoE USB

PWR WAN LAN1-4

LAN1-4

Console WAN STROM

16

Ports an der Vorderseite

Tasten an der Vorderseite

Port Beschreibung

STROM

WAN

LAN1-4

53,5V DC-Stromanschluss

Wide Area Network-Interface

Erste Local Area Network-Interface

CONSOLE

USB

Ein RJ45-Console-Port für die serielle Verwaltung

Ein USB-Management-Port für Software- und Kongurationsbackup

und Oine-Software-Upgrade

Taste Beschreibung

RESET Länger als 3 Sekunden drücken: Auf Werkseinstellungen zurücksetzen.

Kürzer als 3 Sekunden drücken: Neustart des Controllers.

DE

Hardware-Übersicht

AC-1004

17

LEDs an der Vorderseite

Rückseite

WAN

100/10M Link Up PortDurchgehend Orange

Blinkt Orange 100/10M Daten-Transceiver-Port

LAN

SYS

PWR

POE

Aus

Blinkt Grün

Durchgehend Orange

Durchgehend Grün

Blinkt Grün

Durchgehend Grün

Aus

Durchgehend Grün

Aus

Das System ist fehlerhaft.

Das System wird initialisiert.

Der Initialisierungsprozess ist abgeschlossen.

Der Controller ist ausgeschaltet.

Der Controller ist eingeschaltet.

PoE ist ausgeschaltet.

PoE ist eingeschaltet.

Keine Port-Verbindung

1000M Link Up Port

1000M Daten-Transceiver-Port

100/10M Link Up PortDurchgehend Orange

Blinkt Orange 100/10M Daten-Transceiver-Port

Blinkt Grün

Durchgehend Grün

Aus Keine Port-Verbindung

1000M Link Up Port

1000M Daten-Transceiver-Port

LED Status Beschreibung

DE

Erdungspunkt

Console

USB RJ45

SFP

SFP+SFP

1/MGMT 2 4 6 83 5 7 1F 3F 5F 7F2F 4F 6F 8F

1F 3F

2F

SFP+

4F

Reset

Console

AC-7072

USB

18

Ports an der Vorderseite

Port Beschreibung

CONSOLE

USB

RJ45

Ein RJ45-Console-Port für die serielle Verwaltung

Ein USB-Verwaltungsport für Software- und Kongurationssicherung

und Oine-Software-Upgrade

110/100/1000Base-T-Ports für Ethernet-Anschluss

SFP

SFP+

Optisches und elektrisches Multiplexing 1000Base-X SFP-Port für

1G-Verbindung

10GBASE-SR/LR SFP+-Port für 10G-Verbindung

Tasten an der Vorderseite

Taste Beschreibung

RESET Auf Werkseinstellungen zurücksetzen.

DE

AC-7072

LEDs an der Vorderseite

Rückseite

19

DE

SYSTEM

1-8G

Elektrisches

1F-8F 1G

Optischer

Indikator

1F-4F 10G

Optischer

Indikator

Das System wird initialisiert.Blinkt Grün

1G VerbindungDurchgehend Grün

VerbindungBlinkt Grün

Daten-TransceiverDurchgehend Grün

Strom Erdungspunkt

Daten-TransceiverDurchgehend Grün

100/10M-VerbindungDurchgehend Gelb

Daten-TransceiverBlinkt

Der Initialisierungsprozess ist abgeschlossen.Durchgehend Grün

Das System meldet einen Alarm.Durchgehend Rot

LED Status Beschreibung

Page is loading ...

FS COM AC-7072 User guide

FS COM AC-7072 User guide

in other languages

Related papers

Other documents