DOLBY ATMOS HDMI2.0 User manual

Brand: DOLBY ATMOS

Model: HDMI2.0

Category: Video splitters

Type: User manual

User Manual V2.0

HDMI2.0 Matrix 4x2

4K@60 4:4:4 8bit HDR, Scaler Output

Dolby Vision,Dolby Atmos

EZ-MX42HS

OVERVIEW

This Matrix 4x2 is 4 IN 2 OUT HDMI Matrix with Ultra HD up to

4K@60Hz 4:4:4 8bit HDR and HDCP2.2,support Dolby vision and

Dolby atmos.It reliably distributes four HDMI source signal to two

HDMI display devices, ideally use for offices,school,conference

rooms,shopping malls,hotels and museums, which require to

distribute and switch multiple HDMI source signal to two HDMI

display devices.

FEATURES

⚫ Distributes four HDMI sources signal to two HDMI display devices. It

supports 4K and 1080P output simultaneously.

⚫ Supports HDMI 2.0 4K@60Hz 4:4:4 8bit HDR, HDCP 2.2

⚫ Supports Dolby vision

⚫ Supports EDID copy, multiple EDID setting for compatibility

⚫ Supports 3D, Support deep color 30bit, 36bit

⚫ Supports Blue-Ray 24/50/60fs/HD-DVD/xvYCC

⚫ Supports HDMI signal re-timing, never lose quality

⚫ support Dolby atmos,Dolby HD Audio and DTS HD audio;

⚫ Plug and Play; No driver required; Installs in minutes

⚫ Support remote control, button control

Remote control

The remote control can be used to turn on and off the matrix and

switch the HDMI source for each output.

1. Please remove the insulation slice before use.

2. Please make sure the remote is pointed directly at the IR receiver

window.

EDID SETTING

SCALER SETTING

SPECIFICATIONS

1) HDMI version: HDMI 2.0

2) HDCP version: HDCP2.2

3) HDMI resolution: 4K*2K/1080p/1080i/720p/576p/576i/480p/480i

4) Support video format: 24bit/30bit,36bit deep color

5) Support audio format: Dolby Atmos/Dolby true HD/DTS-

HD/LPCM7.1/Dolby-AC3/DSD

6) Max bandwidth: 600MHz Max baud rate: 6Gbps

8) Input/Output TMDS signal: 0.5~1.5Volts p-p(TTL)

9) Input/Output DDC signal: 5Volts p-p (TTL)

10) Max working current: 1.5A

11) Power adapter format: Input AC 100V-240V/ 50HZ,60HZ;

Output: DC5V/2A

12) Operating Temperature range: -15 to +55℃

13) Operating Humidity range: 5 to 90%RH (No Condensation)

14) Dimension (L x W x H): 180*84*16(mm)

17) Weight: 380g

INSTALLATION

1. Connect one cable from HDMI source devices to HDMI Matrix input.

2. Connect one cable from each display (monitor or projector) to the

HDMI Matrix outputs.

Note: To solve HDCP issue, please press output1 button 3 seconds and the

output1 leds flash 3 times.

Update

Please download Firmware Upgrade Tool at easycoolav.com, then refer to

below Firmware Upgrade Instruction.

Baud Rate=57600bps, Data=8bit, Parity=None, Stop=1bit

Double click the UartAssist.exe. Set the correct parameters and click

<Open>

Send a command <ISP 32 1> +Enter, then click <Send> button.

Running < STM Flash Loader Demo>

Select correct port and click <next>

Select 128K and <next>

Finish and re-start matrix

PACKING LIST

1. HDMI Matrix x1

2. Power Adapter x1

3. Mounting Ear x2

4. HOOK&LOOP x2

5. Reusable Cable Tie x2

6. User Manual x1

Trouble-shooting

1. Does not support HDMI 2.1 4K 120Hz, supports HDMI 2.0 1080P 120Hz.

2. To get UHD 4K60Hz/ HDR/ HDR Dolby Vision signal, please use 3~5 meter

qualified HDMI2.0 AWG26 cable

3. Regarding of flicking, blank picture issue, please press HDMI OUT 1

button for 3 seconds, wait led flash 3 times to reset matrix.

4. HDMI matrix two outputs can down-scale 4K 60/50/30Hz to 1080P 60Hz

ONLY separately, down-scale 4K to 1080P 60Hz ONLY , no another option.

DO NOT down-scale HDR Dolby Vision (4K60 4:2:2), VRR, otherwise SCREEN

WASH out.

5. Does not support convert HDR to SDR signal.

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15

DOLBY ATMOS HDMI2.0 User manual

Brand: DOLBY ATMOS

Model: HDMI2.0

Category: Video splitters

Type: User manual

Other documents