2. Gigabyte
  3. W771-Z00
W771-Z00

Gigabyte W771-Z00 Installation guide

  • Hello! I'm your chat assistant. I've reviewed the Rail Kit Quick Installation Guide and can help you understand how to install your new rail kit. The document details the step-by-step process, including removing the inner rail, installing the inner rail with optional bracket, fixing the outer rail, and inserting the chassis. I'm ready to answer any questions you have about these instructions.
  • What is the first step in the installation process?
    What should you do after removing the inner rail?
    What should be done after inserting the chassis into the rails?
Rail Kit Quick Installa�on Guide
Click! Outer Rail
Inner Rail
White
1
2
3
1
2
3
Front Bracket
Front Bracket
Rear Bracket
Detach FrontBracket From Rack Post DetachRear Bracket From Rack Post
Click!
Click!
Qvmm
Rear Bracket
Pull
Qvmm
Pull
M5x10+Washer
12
3
4
5
Key Hole
M4X4 Flat head screw
1
2
3
Click!
1
2
3
4
5
Remove the chassisfromrack
Pull
White
A) Remove the Inner Rail B) Push and Slide Middle Rail back
C) Install the Inner Rail (op�onal suppor�ng bracket) onto the chassis
D) Fix the Outer Rail/Bracket assembly to the frame
E) Insert the Chassis
1. Pull the middle rail fully extended in lock posi�on.
2. Ensure ball bearing retainer is located at the front of the middle rail.
3. Insert the chassis into middle-outer rails.
4. When hit a stop, please pull/push the blue release tab on the inner rails.
5 Push the chassis back to the rack and fasten M5x9 screw to chassis ear.
/