Marmitek Stream S2 Pro Transmitter Operating instructions

Brand: Marmitek

Model: Stream S2 Pro Transmitter

Type: Operating instructions

Marmitek Stream S2 Pro Transmitter brings wireless streaming to your home or office, allowing you to effortlessly mirror content from your devices to your TV or projector. Compatible with AirPlay and Miracast, it seamlessly connects with your iOS or Android devices for screen mirroring.

This powerful transmitter supports high-quality video resolutions up to 1080p at 60Hz, ensuring crystal-clear visuals. With an operational range of up to 20 meters (line of sight) and a latency of less than 120 milliseconds, you'll enjoy smooth, responsive streaming without interruptions.

Installation is a breeze, simply connect the HDMI stick to your source device and power the receiver via USB. The transmitter and receiver come pre-paired, making setup quick and easy.

Home » MARMITEK » MARMITEK Stream S2 Pro Transmitter Instructions

Contents

1 MARMITEK Stream S2 Pro

Transmitter

2 Connections

3 Safety instructions

4 Technical speciﬁcations

5 Documents / Resources

5.1 References

6 Related Posts

MARMITEK Stream S2 Pro Transmitter

MARMITEK Stream S2 Pro Transmitter Instructions

Manuals+ — User Manuals Simpliﬁed.

Connections

(NL) Aanlsluitingen, (DE) Anschlüsse, (FR) Connexions, (ES) Conexiones, (IT) Collegam

Set content

(NL) Set inhoud, (DE) Set-Inhalt, (FR) Contenu du set, (ES) Contenido del embalaje, (IT) Contenuto kit

Stream T2 Pro Transmitter

HDMI extension cable

USB 2.4 GHz cable

USB-C adapter

Stream R2 Pro Receiver

HDMI adapter

Micro USB cable

Safety instructions

Please read these instructions thoroughly before you use the device and keep them for future reference.

1. This product is not a toy. Keep out of reach of children.

2. Repairs or service should only be performed by qualiﬁed personnel.

Requirements

For AirPlay use iOS 9.0 or above

For Miracast use Android 5.0 or above

Step 1: Installing the Stream R2 Pro (receiver)

1. Plug the HDMI stick into the HDMI input of the display or projector. If necessary, use the optional HDMI

extension cable for optimal placement.

2. Use the USB 2.4 GHz cable as power supply for the Receiver by plugging it into a free USB port of the display

or projector.

Receiver LED status:

Blue (blinking) – waiting for connection

Blue – connected

Step 2: Installing the Stream T2 Pro (transmitter)

1. Plug the HDMI stick into the HDMI output from the source (e.g. laptop or any other HDMI device).

2. Some source devices can supply enough power through HDMI output to the Transmitter. In case the LED

remains red, use the USB-C adapter (or micro-USB cable) to provide the transmitter with extra power.

3. If necessary, use the optional HDMI adapter (male > female) for optimal placement and installation.

Transmitter LED status:

Red – starting up

Red (blinking) – searching for Receiver

Blue (blinking) – waiting for connection

Blue – connected

Purple – no supported video signal

Step 3: Pairing additional transmitters (optional)

The Transmitter and Receiver supplied in this set are already paired. However, when adding an additional

Transmitter (Stream T2 Pro) it must be paired with the Receiver.

1. Power ON the Receiver and wait until it has started up and the home page appears on the screen.

2. Ensure all other available Transmitters are powered OFF.

3. Power ON the Transmitter and wait around 15 seconds. The indicator LED will change from static red to static

blue and “Pairing Successful” will appear on the screen.

Step 4: Connect the Receiver to your Wi-Fi (optional)

The Receiver can be connected to your wireless router through Wi-Fi for easy connection with AirPlay and

Miracast.

1. Open the Wi-Fi settings on your laptop or smart device, connect to the SSID “Stream S2 Pro” and enter the

password displayed on the screen.

2. Open the browser on your laptop or smart device and enter the IP address displayed on the screen.

3. Select the SSID from the wireless router and enter the password.

4. Once connected the SSID from the wireless router is displayed on the screen.

Start Presenting

Switch your display or projector ON and wait until the home screen appears on the screen. Follow the instruction

on the screen to connect your PC or laptop by using the Transmitter or simply use the AirPlay or Miracast screen

mirroring function from your smart phone or tablet.

Technical speciﬁcations

Video resolution max. 1080p@60Hz

PC resolution max. 1920 x 1080

HDMI standard HDMI 1.4 / HDCP 1.3

Audio formats PCM stereo

Operational frequency IEEE 802.11ac, 5GHz, 2T2R

Authentication Protocol WPA2 (WPAS-PSK / WPA2- Enterprise)

Security AES 128 bit

Operating range up to 20 meters (line of sight)

Latency < 120 ms

Video compression H.264

Wireless streaming AirPlay, Miracast, DLNA

Multiple transmitters up to 20

Power 5VDC 0.5A

Dimensions 83 x 32 x 13mm

Weight 27.1g

Declaration of Conformity

Hereby, Marmitek BV, declares that the Stream S2 Pro is in compliance with the essential requirements of the

2014/53/EU Directives. Full Declaration of Conformity is available at www.marmitek.com/en/declarations-of-

conformity/

stay connected marmitek.com

Documents / Resources

MARMITEK Stream S2 Pro Transmitter [pdf] Instructions

Stream S2 Pro Transmitter, Stream S2 Pro, Transmitter

References

Marmitek | Smart home and wireless HDMI & audio | since 1997

Declarations of Conformity | Marmitek

Manuals+,

Marmitek Stream S2 Pro Transmitter Operating instructions

Brand: Marmitek

Model: Stream S2 Pro Transmitter

Type: Operating instructions

Installation is a breeze, simply connect the HDMI stick to your source device and power the receiver via USB. The transmitter and receiver come pre-paired, making setup quick and easy.

Download PDF

report

Marmitek Stream S2 Pro Transmitter Operating instructions

Marmitek Stream S2 Pro Transmitter Operating instructions

Related papers

Other documents