Product Guid
e
CONTEC CO.
,
LTD.
3-9-31
,
Himesato
,
Nishi
y
odo
g
awa-ku
,
Osaka 555-0025
,
Ja
p
an
https://www.contec.com
/
No part of this document may be copied or reproduced in any form by any means
without prior written consent of CONTEC CO., LTD.
NA07133 (LYXU061) [12032019] December 2019 Edition
2.5-inch 64GB SATA SSD MLC
SSD-64GS-2M
Thank you for purchasing this product. The product you have purchased consists of the
following items.
Check, with the following list, that your package is complete.
If you find any item either missing or damaged, please contact the sales representative you
purchased the product from.
1. About the Product
This product is a solid state drive in accordance with 2.5-inch SATA standard.
Check, with the following list, that your package is complete.
2. Product Configuration
This product consists of the items listed below.
Check, with the following list, that your package is complete. If you discover damaged or
missing items, contact your retailer.
Product...1 Product Guide...1 Warrant
y
Certificate...1 Serial Number Label...1
3. Safety Precautions
Understand the following definitions and precautions to use the product safely.
Safety Information
This document provides safety information using the following symbols to prevent
accidents resulting in injury or death and the destruction of equipment and resources.
Understand the meanings of these labels to operate the equipment safely.
DANGER
DANGER indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
WARNING
WARNING indicates a potentially hazardous situation
which, if not avoided, could result in death or serious
injury.
CAUTION
CAUTION indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate
injury or in property damage.
Handling Precautions
WARNING
Do not modify the product. Doing so may cause fire, electric shock.
If smoke or abnormal odor is detected, immediately turn off the PC and peripheral
devices and unplug the power cables.
Never touch this product with wet hands. Doing so can short-circuit the product to
cause fire, electric shock, and/or failure.
CAUTION
Do not use the product in water, oil, chemical solution, organic solvents, or any other
fluid.
Do not use the product in a location exposed to direct sun, outdoors or dust.
Do not use the product in a location exposed to sea breeze, or corrosive gases such as
Cl2, H2S, NH3, SO2, or NO2.
Do not use the product in the environment with strong static electricity or
electromagnetic waves. It may cause failure.
Do not use this product fully sealed or coated with such as resin.
Take countermeasures beforehand to handle the product and avoid a shock.
Do not touch the connector pin with your hand or put foreign objects into connector
mating part.
This is a precision product. Handle with care when transporting or assembling.
Be sure to turn off the product power before inserting or removing the interface
connector.
CONTEC bears absolutely no responsibility for use if modified drive.
Excessive vibration or impact greater than its specification, if this SSD is subjected to,
might cause a fatal error that is not recoverable.
SSD has a lifetime. Refer to the write endurance for longevity. These are the standard
values when the environmental and operational conditions specified in the table below
are observed and are not the guaranteed values.
This product is designed to be plugged only in one orientation. Do not force it to be
plugged in.
No part of this document may be copied or reproduced in any form by any means
without prior written consent of CONTEC CO., LTD.
The contents of this document may be changed in the future without prior notice.
All relevant issues have been considered in the preparation of this document. Should
you notice an omission or any questionable item in this document, please feel free to
notify CONTEC CO., LTD.
Regardless of the foregoing statement, CONTEC assumes no responsibility for any errors
that may appear in this document or for any results of using the product.
This product is not formatted. Please be sure to format before use.
The drive may be damaged if the product power is turned off during initialization after
the powering on the product. Do not turn off the power within 30 seconds after turning
on the product power.
Disclaimers
We shall not be liable for any consequential damages such as losses and lost profits
resulting from the operation of this product. For any reason we shall provide no warranty
for the stored contents on your hard disk.
Disposal
When disposing of the product, follow the disposal procedures stipulated under the
relevant laws and municipal ordinances.
4. About write endurance
SSD has write endurance which limits the number of times each memory may be written,
due to the characteristic of the memory that is used. Write endurance can be calculated
by the following formula as a reference value:
Write endurance (years) = Total capacity (cycles) / ( The number of annual consumed blocks
/ The total number of blocks)
Example :
When the file of 4MB is made, and it rewrites it once per 10 seconds.
The number of annual consumed blocks = ( 4 x ( 60 / 10 ) x 60 x 24 x 365 ) / 8 = 1,576,800(cy-
cles)
Life = 3,000 / ( 1,576,800 / 4,096 ) ≈ 7.79 (years)
These are reference values. Confirm its longevity by the following S.M.A.R.T. after installing
the specific software (*) and implement tentative writing.
Life expectancy can be obtained by installing the self- diagnosis program that acquires
S.M.A.R.T. information of SSD.
5. Specifications
Item Specifications
Host interface SATA III (6.0Gbps)
Installed Memor
y
MLC NAND Flash memor
y
Total capacit
y
61,057MB
y
te
LBA 125,045,424
Transfer velocity Read 530Mbit/sec *1
Write 100Mbit/sec *1
Input volta
g
e +5VDC (±5%)
Current
consumption
Idle 91mA (Max.)
Read 93mA (Max.)
Write 160mA (Max.)
Environment
Requirements
Temperature 0 - +70°C
Temperature -55 - +95°C
Humidit
y
10 - 95%RH (With no condensation)
Corrosive
g
ases None
Swept sine vibra-
tion
20G or less (7
–
2,000Hz)
Shock 1500G or less (0.5ms)
NAND Flash memor
y
life span 3,000c
y
cles
Ph
y
sical dimensions (mm) 69.85(W)×100.0(D)×6.8(H)
Wei
g
ht 40
g
(approx.)
*1 It might differs depending on the software or host to be used.
6. Connector Pin Assignment
Pin Signal Pin Signal Pin Signal Pin Signal
S1 GND S2 A+ S3 A- S4 GND
S5 B- S6 B+ S7 GND
P1 N.C. P2 N.C. P3 N.C. P4 GND
P5 GND P6 GND P7 5V P8 5V
P9 5V P10 GND P11 DAS/DSS P12 GND
P13 N.C. P14 N.C. P15 N.C.
7. Physical Dimensions
[mm]
-
1
Contec SSD-64GS-2M NEW Owner's manual
- Type
- Owner's manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Contec BX-T210R Reference guide
-
-
-
-
Contec BX-U200 Reference guide
-
Contec BX-825 Owner's manual
-
-
-
-