Page is loading ...
2928 Electric Strike
Installation Instructions
I-EA00077
Rev 2, Rev Date: 5/14/20
Always visit www.hagerco.com for the latest Installation Instructions
HAGER COMPANIES 139 Victor Street, St. Louis, MO 63104 • (800) 325-9995
INSTALLATION INSTRUCTIONS
2928 SERIES ELECTRIC STRIKES
2928-RC – 4.875" Radius corners for aluminum/
wood frame
2928-6R – 6.875" Radius corners for aluminum/
wood frame.
2928-7R – 7.938" Radius corners for aluminum/
wood frame
MODELS:
2928-SC – 4.875" (124mm) Square corners for
wood and hollow metal frames.
FEATURES:
For 5/8” latch or 3/4” latch with 1/8” door gap.
Latch bolt monitor standard.
Keeper closed & deadlocked standard.
Field selectable fail-safe / fail-secure.
Field selectable voltage, 12/24V AC/DC
AC with Rectifier (BR64XL)
1/4” horizontal alignment adjustment.
Plug-in wire connectors.
Low profile, 1-3/16” deep
All stainless steel parts with durable die cast body
for corrosion resistance.
Fewer moving parts for maximum life.
630 stainless steel standard.
ANSI A156.31
UL Listed (BP10254)
2928 Electric Strike
Installation Instructions
I-EA00077
Rev 2, Rev Date: 5/14/20
Always visit www.hagerco.com for the latest Installation Instructions
HAGER COMPANIES 139 Victor Street, St. Louis, MO 63104 • (800) 325-9995
Typical Hollow Metal Frame
Typical Aluminum Frame
FAILSAFE
FAILSECURE STANDARD. FIELD ADJUSTABLE FROM FAILSECURE TO FAILSAFE AS SHOWN
[30.48]
1.2
[31.75]
1.25
[104.78]
4.125
[85.73]
3.375
[123.83
]
4.875
#12-24 Screws
Faceplate
1-1/4 x 4-7/8
[31.75 x 123.83]
FAILSECURE
[30.48]
1.2
[31.75]
1.25
[123.83]
4.875
[85.73]
3.375
#12-24
Screws
MOUNTING
TABS
2928 Electric Strike
Installation Instructions
I-EA00077
Rev 2, Rev Date: 5/14/20
Always visit www.hagerco.com for the latest Installation Instructions
HAGER COMPANIES 139 Victor Street, St. Louis, MO 63104 • (800) 325-9995
Keeper Status - Locked/Unlocked:
Purple - COM
Brown - N/O
Yellow - N/C
Latch Status:
Orange - COM
White - N/O
Grey - N/C
Solenoid: Black, Red, Blue & Green
ELECTRICAL DATA:
Dual Voltage: 200/100mA @ 12/24VDC
140/70mA @ 12/24VAC
MONITORING:
Latch Status: SDPT, dry 3Amp @ 30V (standard)
Keeper Closed and Deadlocked (standard)
Keeper Open/Closed Status: SPDT, Dry 3Amp @ 30V (optional)
Keeper Status - Open/Closed:
Wht/Blk – COM
Yel/Blk - N/O
Org/Blk - N/C
The electric door strike shall be
installed in such a way as not to
impair the operation of an
emergency exit or panic hardware
mounted on the door.
Wire leads must not be connected
to conductors larger than 18AWG
Notes:
Red
Black
Blue
Green
+
_
Red
Black
Blue
Green
+
_
12V
24V
MOV
MOV
Horizontal
Adjustment
Screws
Die
Cast
Body
Remove Faceplate. Loosen Horizontal Adjustment Screws and slide Die Cast
Body out as needed. Retighten Adjustment Screws and replace Faceplate.
Horizontal Adjustment
2928 Electric Strike
Installation Instructions
I-EA00077
Rev 2, Rev Date: 5/14/20
Always visit www.hagerco.com for the latest Installation Instructions
HAGER COMPANIES 139 Victor Street, St. Louis, MO 63104 • (800) 325-9995
2928 SERIES ELECTRIC STRIKE FRAME PREPARATION
FOR HOLLOW METAL FRAMES
HOLLOW METAL,
SQUARE CORNER
FACEPLATE
ALUMINUM / WOOD
RADIUS CORNER FACEPLATES
2X
.375
1.250
2X
.625
4.875
1.500
2X 1.688
2X
.375
1.250
2X
.625
4.875
1.500
2X 1.688
4X R
.125
1.250
2X
.625
2X
.375
6.875
1.500
2X
2.688
4X R
.125
MATERIAL THICKNESS =
.110
MATERIAL THICKNESS =
.110
1.500
2X
3.219
1.438
2X
.719
4X R
.125
2X
.375
7.938
2928-6R
2928-SC
2928-RC
2928-7R
CENTER LINE OF STRIKE
AND LOCK BOLT OF LOCK
SHOULD ALIGN HORIZONTALLY
C
L
C
L
.375
1.2
3.375
.250
4.875
*
2X TAP FOR
#12-24 UNC THDS
THRU
2X .110 MTG
TAB DEPTH
(TYP)
*
*
= SIZE DEPENDANT ON
MODEL ORDERED
/
