Hagerco 2928 - Multi-Application Electric Strike Installation guide

Brand: Hagerco

Model: 2928 - Multi-Application Electric Strike

Type: Installation guide

Hagerco 2928 - Multi-Application Electric Strike is a low-profile electric strike with a durable die-cast body and all stainless steel parts for corrosion resistance. It has a 1/4” horizontal alignment adjustment and is field-selectable fail-safe / fail-secure. The Hagerco 2928 strike is suitable for 5/8” latch or 3/4” latch with 1/8” door gap and has a latch bolt monitor standard. It is UL Listed (BP10254) and ANSI A156.31 compliant.

2928 Electric Strike

Installation Instructions

I-EA00077

Rev 2, Rev Date: 5/14/20

Always visit www.hagerco.com for the latest Installation Instructions

HAGER COMPANIES 139 Victor Street, St. Louis, MO 63104 • (800) 325-9995

INSTALLATION INSTRUCTIONS

2928 SERIES ELECTRIC STRIKES

 2928-RC – 4.875" Radius corners for aluminum/

wood frame

 2928-6R – 6.875" Radius corners for aluminum/

wood frame.

 2928-7R – 7.938" Radius corners for aluminum/

wood frame

MODELS:

 2928-SC – 4.875" (124mm) Square corners for

wood and hollow metal frames.

FEATURES:

 For 5/8” latch or 3/4” latch with 1/8” door gap.

 Latch bolt monitor standard.

 Keeper closed & deadlocked standard.

 Field selectable fail-safe / fail-secure.

 Field selectable voltage, 12/24V AC/DC

 AC with Rectifier (BR64XL)

 1/4” horizontal alignment adjustment.

 Plug-in wire connectors.

 Low profile, 1-3/16” deep

 All stainless steel parts with durable die cast body

for corrosion resistance.

 Fewer moving parts for maximum life.

 630 stainless steel standard.

 ANSI A156.31

 UL Listed (BP10254)

2928 Electric Strike

Installation Instructions

I-EA00077

Rev 2, Rev Date: 5/14/20

Always visit www.hagerco.com for the latest Installation Instructions

HAGER COMPANIES 139 Victor Street, St. Louis, MO 63104 • (800) 325-9995

Typical Hollow Metal Frame

Typical Aluminum Frame

FAILSAFE

FAILSECURE STANDARD. FIELD ADJUSTABLE FROM FAILSECURE TO FAILSAFE AS SHOWN

[30.48]

1.2

[31.75]

1.25

[104.78]

4.125

[85.73]

3.375

[123.83

]

4.875

#12-24 Screws

Faceplate

1-1/4 x 4-7/8

[31.75 x 123.83]

FAILSECURE

[30.48]

1.2

[31.75]

1.25

[123.83]

4.875

[85.73]

3.375

#12-24

Screws

MOUNTING

TABS

2928 Electric Strike

Installation Instructions

I-EA00077

Rev 2, Rev Date: 5/14/20

Always visit www.hagerco.com for the latest Installation Instructions

HAGER COMPANIES 139 Victor Street, St. Louis, MO 63104 • (800) 325-9995

Keeper Status - Locked/Unlocked:

Purple - COM

Brown - N/O

Yellow - N/C

Latch Status:

Orange - COM

White - N/O

Grey - N/C

Solenoid: Black, Red, Blue & Green

ELECTRICAL DATA:

 Dual Voltage: 200/100mA @ 12/24VDC

140/70mA @ 12/24VAC

MONITORING:

 Latch Status: SDPT, dry 3Amp @ 30V (standard)

 Keeper Closed and Deadlocked (standard)

 Keeper Open/Closed Status: SPDT, Dry 3Amp @ 30V (optional)

Keeper Status - Open/Closed:

Wht/Blk – COM

Yel/Blk - N/O

Org/Blk - N/C

The electric door strike shall be

installed in such a way as not to

impair the operation of an

emergency exit or panic hardware

mounted on the door.

Wire leads must not be connected

to conductors larger than 18AWG

Notes:

Red

Black

Blue

Green

Red

Black

Blue

Green

12V

24V

MOV

Horizontal

Adjustment

Screws

Die

Cast

Body

Remove Faceplate. Loosen Horizontal Adjustment Screws and slide Die Cast

Body out as needed. Retighten Adjustment Screws and replace Faceplate.

Horizontal Adjustment

2928 Electric Strike

Installation Instructions

I-EA00077

Rev 2, Rev Date: 5/14/20

Always visit www.hagerco.com for the latest Installation Instructions

HAGER COMPANIES 139 Victor Street, St. Louis, MO 63104 • (800) 325-9995

2928 SERIES ELECTRIC STRIKE FRAME PREPARATION

FOR HOLLOW METAL FRAMES

HOLLOW METAL,

SQUARE CORNER

FACEPLATE

ALUMINUM / WOOD

RADIUS CORNER FACEPLATES

.375

1.250

.625

4.875

1.500

2X 1.688

.375

1.250

.625

4.875

1.500

2X 1.688

4X R

.125

1.250

.625

.375

6.875

1.500

2.688

4X R

.125

MATERIAL THICKNESS =

.110

MATERIAL THICKNESS =

.110

1.500

3.219

1.438

.719

4X R

.125

.375

7.938

2928-6R

2928-SC

2928-RC

2928-7R

CENTER LINE OF STRIKE

AND LOCK BOLT OF LOCK

SHOULD ALIGN HORIZONTALLY

.375

1.2

3.375

.250

4.875

2X TAP FOR

#12-24 UNC THDS

THRU

2X .110 MTG

TAB DEPTH

(TYP)

= SIZE DEPENDANT ON

MODEL ORDERED

Hagerco 2928 - Multi-Application Electric Strike Installation guide

Hagerco 2928 - Multi-Application Electric Strike Installation guide

Hagerco 2928 - Multi-Application Electric Strike Installation guide

Related papers

Other documents