Product Name:
Pre-Lit Clear LED 3ft and 4ft Porch Artificial Tree with Metal Base
SKU #:
WHAP686
Contact: sales@winsomehouse.com
Instruction Manual
Please save this manual for future reference.
Thank you for purchasing this Luxen Home product. This product has been manufactured with the highest
standards of safety and quality.
PLEASE READ ALL INSTRUCTIONS BEFORE ASSEMBLY.
Unpack all parts from Styrofoam and bubble wrap inside the carton to ensure there are no missing or damaged
parts. If any parts are missing or damaged, do not attempt to assemble or use the product.
CARTON CONTENTS:
PART
DISCRIPTION
QUANTITY
A Top Tree (for the 4ft tree) 1
B Bottom Tree (for the 4ft tree) 1
C 3FT Tree 1
D
Garland
1
E Base 1
Assembly Instructions:
Step 1
Before starting assemble of the tree, choose a location near a wall outlet. Place the base pot on a level surface.
Insert the upper section (A) of the 4ft tree in the bottom section (B).
Step 2
Put the garland in the pot.
Step 3
Insert two trees in the pot. Connect the plugs securely as shown in the image. Connect the cable to the wall
outlet. If some bulbs do not come on, look for loose, broken, or missing plugs. (See the troubleshooting section.)
Keep the tree plugged in while shaping your tree. If a light flashes when doing this, check the bulb(s). Replace
bulbs promptly.
Step 4
To shape the branches and tips, work from the bottom to the top. Start with tips farthest from the pole and fan
out to the right, one to the left, and one at the center of the main stem.
Product Name:
Pre-Lit Clear LED 3ft and 4ft Porch Artificial Tree with Metal Base
SKU #:
WHAP686
Contact: sales@winsomehouse.com
Instruction Manual
Please save this manual for future reference.
Tools required for assembly: No tools required.
Special Warnings and Cautions:
To avoid injury and/or damage, please keep on leveled ground and away from moisture. Do not
leave the tree unattended.
Product Name:
Pre-Lit Clear LED 3ft and 4ft Porch Artificial Tree with Metal Base
SKU #:
WHAP686
Contact: sales@winsomehouse.com
Instruction Manual
Please save this manual for future reference.
TROUBLESHOOTING INSTRUCTIONS:
1. Check if the cable is properly plugged into the power outlet.
2. Make sure there is power in the outlet.
3. Check if all the plugs inside the tree are connected securely.
4. Check if all the bulbs are firmly fixed inside the lamp holder.
5. If the bulb is blown, replace the defective bulb following the diagram below. There are replacement bulbs
included for easy replacement.
6. If none of the lights are working, check the fuse on a light cord. If the fuse is blown, replace the blown fuse
following the diagram below. There is a replacement fuse included for easy replacement.
/
