CERTIFICATION LABEL
This bunk bed model has been tested by an
independent laboratory and is in compliance
withASTM F-1427 Standard Consumer Safety
cation For Bunk Beds and the Government
Code of Federal Regulations 1213 and 1513.
P1001
RODUCT NAME / MODEL: TT
TWIN/TWIN BUNK BED
FACTORY CODE : # MADE IN BRAZIL
349
DISTRIBUTED BY:
Donco Trading Co.
Fort Worth, TX 76140
ORDER NUMBER:
13S
DATE OF MANUFACTURE :
SEPTEMBER / 2015
1002 FULL CIRCLESTWIN
BUNK BED
TO OBTAIN PARTS, PLEASE CONTACT: DONCO TRADING COMPANY - FORT WORTH, TEXAS
TO HELPPREVENT SERIOUS OR FATALINJURIES FROM
ENTRAPMENT OR FALLS:
*Never allow a child under 6 years on upper bunk.
*Only use mattress which is 74"- 75" long and 37 1/2"- 38 1/2" wide
and maximum 9" high on upper and lower bunk.
* Ensure thickness of mattress and foundation combined does not
exceed 9"and mattress is at least 5"below upper edge of guardrails.
* Use guardrails on both sides of upper bunk.
* Prohibit horseplay on or under bed(s).
* Prohibit more than one person on the upper bunk.
* Use ladder for entering and leaving upper bunk.
STRANGULATION HAZARD
* Never attach or hang items to any part of the bunk bed that are not
designed for use with the bed; for example, but not limited to hooks,
belts, and jump ropes.
DO NOT REMOVE THIS LABEL
ASSEMBLY INSTRUCTIONS
Thank you for purchasing this quality product. Be sure to check all packing
material carefully for small parts which may have come loose inside the
carton during shipment. Separate, identify and count all parts and hardware.
Compare with the parts list to be sure all parts are present.
"DO NOT TIGHTEN SCREWS UNTIL COMPLETELY ASSEMBLED"
IMPORTANT:
PLEASE READ INSTRUCTION BEFORE STARTING THE ASSEMBLY
* Use of power tool to assemble this
product will invalidate any claim and
damage this product making unsafe !!!
* Please assemble on a clean soft
surface to avoid damage.
!
Tools Required
(Not included)
+
1
2
3
4
5
6
7
8
9
10
11 12
(Not included)
Fort , Texas 76140Worth
1:00 h
1002 TWIN FULL CIRCLES BUNK BED
CERTIFICATION LABEL
This bunk bed model has been tested by an
independent laboratory and is in compliance
withASTM F-1427 Standard Consumer Safety
Specification For Bunk Beds and the Government
Code of Federal Regulations 1213 and 1513.
P1
001
RODUCT NAME / MODEL: TT
TWIN/TWIN BUNK BED
FACTORY CODE : #MADE IN BRAZIL
349
DISTRIBUTED BY:
Donco Trading Co.
Fort Worth, TX 76140
ORDER NUMBER:
13S
DATE OF MANUFACTURE :
SEPTEMBER / 2015
TO HELPPREVENT SERIOUS OR FATALINJURIES FROM
ENTRAPMENT OR FALLS:
*Never allow a child under 6 years on upper bunk.
*Only use mattress which is 74"- 75" long and 37 1/2"- 38 1/2" wide
and maximum 9" high on upper and lower bunk.
* Ensure thickness of mattress and foundation combined does not
exceed 9"and mattress is at least 5"below upper edge of guardrails.
* Use guardrails on both sides of upper bunk.
* Prohibit horseplay on or under bed(s).
* Prohibit more than one person on the upper bunk.
* Use ladder for entering and leaving upper bunk.
STRANGULATION HAZARD
* Never attach or hang items to any part of the bunk bed that are not
designed for use with the bed; for example, but not limited to hooks,
belts, and jump ropes.
DO NOT REMOVE THIS LABEL
Identifying the Hardware-Identify the hardware using the illustrations below.
Part List - BED1002 TWIN FULL CIRCLES BUNK
4,0 x 30 Screw
Qty
Qty
H
L
29
02
Qty
F02
CERTIFICATION LABEL
This bunk bed model has been tested by an
independent laboratoryand isin compliance
withASTM F-1427 Standard ConsumerSafety
Specification For Bunk Beds and the Government
Code of Federal Regulations 1213 and 1513.
P1
001
RODUCT NAME / MODEL: TT
TWIN/TWIN BUNK BED
FACTORY CODE : # MADE IN BRAZIL
349
DISTRIBUTED BY:
Donco Trading Co.
Fort Worth, TX 76140
ORDER NUMBER:
13S
DATE OF MANUFACTURE :
SEPTEMBER / 2015
6
13
14
15
15
15
15
15
B24
Qty
14
10 x 40 Wood Dowel
1/4 x 0 Screw101/4 x 0 Screw10
7,0 x100 Screw
440,0 x Screw440,0 x Screw
15 Wood Dowelx10015 Wood Dowelx100
10 9 Wood Dowelx010 9 Wood Dowelx0
D
G
J
A
M
Qty
16
Qty
Qty
Qty
Qty
Half Moon
06
02
02
02
EQty
1/4" 16
C
Qty
7,0 x 50 Screw
Hook Ladder
Hex Screwdriver
Qty
K01
Qty
22
3,5 x 20 Screw
I
10
11
4
9
9
12
3
8
8
11
2
3
3
11
5
1
7
16
17
TO HELPPREVENT SERIOUS OR FATALINJURIES FROM
ENTRAPMENT OR FALLS:
*Never allow a child under 6 years on upper bunk.
*Only use mattress which is 74"- 75" long and 37 1/2"- 38 1/2" wide
and maximum 9" high on upper and lower bunk.
* Ensure thickness of mattress and foundation combined does not
exceed 9"and mattress is at least 5"below upper edge of guardrails.
* Use guardrails on both sides of upper bunk.
* Prohibit horseplay on or under bed(s).
* Prohibit more than one person on the upper bunk.
* Use ladder for entering and leaving upper bunk.
STRANGULATION HAZARD
* Never attach or hang items to any part of the bunk bed that are not
designed for use with the bed; for example, but not limited to hooks,
belts, and jump ropes.
DO NOT REMOVE THIS LABEL
NQty
02
Qty
O02
01
02
TOP SIDE FRONT WITH HOLES
X3
X2
X2
X5
B
BOTTOM BED
24
10 x 40 Wood Dowel
Qty
1/4 x 0 Screw101/4 x 0 Screw10
DQty
08
Half Moon
EQty
1/4" 08
Hex Screwdriver
KQty
01
B
B
BB
E
E
D
D
D
D
D
D
B
B
B
B
B
3
3
3
4
8
9
15
2
1
E
E
E
E
K
D
DE
E
PREDRILLED
MARKS!
3,5 x 20 Screw
IQty
08
Qty
L02
II
IIL
I
I
I
I
L
03
04 4,0 x 30 Screw
Qty
H12
H
H
H
H
H
H
H
H
H
H
A
A
M
I
I
M
H
The rst slats must be xed atfi fi
3” from each headboard end.
!
SIDE-RAIL
LSA
T
``INSTALL SLAT KIT WITH SPACER
TAPE ON TOP (FACING UP)``
16
7
M02
10 x 0 Wood Dowel910 x 0 Wood Dowel9
Qty
15 Wood Dowelx10015 Wood Dowelx100
AQty
02 3,5 x 20 Screw
IQty
04
I
I
7
CERTIFICATION LABEL
This bunk bed model has been tested by an
independent laboratory and is in compliance
withASTM F-1427 Standard Consumer Safety
Specification For Bunk Beds and the Government
Code of Federal Regulations 1213 and 1513.
P1
001
RODUCT NAME / MODEL: TT
TWIN/TWIN BUNK BED
FACTORY CODE : #MADE IN BRAZIL
349
DISTRIBUTED BY:
Donco Trading Co.
Fort Worth, TX 76140
ORDER NUMBER:
13S
DATE OF MANUFACTURE :
SEPTEMBER / 2015
05
06
Hex Screwdriver
Qty
K01
Hex Screwdriver
Qty
K01
1/4 x 0 Screw101/4 x 0 Screw10
DQty
08
Half Moon
EQty
1/4" 08 7,0 x100 Screw
GQty
04
D
D
D
E
E
E
E
D
D
G
G
G
D
D
D
K
E
E
G
K
FRONT
3
4
8
8
5
6
E
E
TOP BED
C
C
10
K
C
Qty
02
C7,0 x 50 Screw
TO HELPPREVENT SERIOUS OR FATALINJURIES FROM
ENTRAPMENT OR FALLS:
*Never allow a child under 6 years on upper bunk.
*Only use mattress which is 74"- 75" long and 37 1/2"- 38 1/2" wide
and maximum 9" high on upper and lower bunk.
* Ensure thickness of mattress and foundation combined does not
exceed 9"and mattress is at least 5"below upper edge of guardrails.
* Use guardrails on both sides of upper bunk.
* Prohibit horseplay on or under bed(s).
* Prohibit more than one person on the upper bunk.
* Use ladder for entering and leaving upper bunk.
STRANGULATION HAZARD
* Never attach or hang items to any part of the bunk bed that are not
designed for use with the bed; for example, but not limited to hooks,
belts, and jump ropes.
DO NOT REMOVE THIS LABEL
TO HELPPREVENT SERIOUS OR FATALINJURIES FROM
ENTRAPMENT OR FALLS:
*Never allow a child under 6 years on upper bunk.
*Only use mattress which is 74"- 75" long and 37 1/2"- 38 1/2" wide
and maximum 9" high on upper and lower bunk.
* Ensure thickness of mattress and foundation combined does not
exceed 9"and mattress is at least 5"below upper edge of guardrails.
* Use guardrails on both sides of upper bunk.
* Prohibit horseplay on or under bed(s).
* Prohibit more than one person on the upper bunk.
* Use ladder for entering and leaving upper bunk.
STRANGULATION HAZARD
* Never attach or hang items to any part of the bunk bed that are not
designed for use with the bed; for example, but not limited to hooks,
belts, and jump ropes.
DO NOT REMOVE THIS LABEL
CERTIFICATION LABEL
This bunk bed model has been tested by an
independent laboratory and is in compliance
withASTM F-1427 Standard Consumer Safety
Specification For Bunk Beds and the Government
Code of Federal Regulations 1213 and 1513.
P1
001
RODUCT NAME / MODEL: TT
TWIN/TWIN BUNK BED
FACTORY CODE : # MADE IN BRAZIL
349
DISTRIBUTED BY:
Donco Trading Co.
Fort Worth, TX 76140
ORDER NUMBER:
13S
DATE OF MANUFACTURE :
SEPTEMBER / 2015
CERTIFICATION LABEL
This bunk bed model has been tested by an
independent laboratory and is in compliance
withASTM F-1427 Standard Consumer Safety
Specification For Bunk Beds and the Government
Code of Federal Regulations 1213 and 1513.
P1
001
RODUCT NAME / MODEL: TT
TWIN/TWIN BUNK BED
FACTORY CODE : #MADE IN BRAZIL
349
DISTRIBUTED BY:
Donco Trading Co.
Fort Worth, TX 76140
ORDER NUMBER:
13S
DATE OF MANUFACTURE :
SEPTEMBER / 2015
07
08 4,0 x 30 Screw
Qty
H08
H
H
H
H
H
H
H
H
The rst slats must be xed atfi fi
3” from each headboard end.
!
SIDE-RAIL
LSAT
``INSTALL SLAT KIT WITH SPACER
TAPE ON TOP (FACING UP)``
12
Qty
02
C7,0 x 50 Screw Hex Screwdriver
Qty
K01
K
C
C
C
G
G
G
K
9
9
7,0 x100 Screw
GQty
02
TO HELPPREVENT SERIOUS OR FATALINJURIES FROM
ENTRAPMENT OR FALLS:
*Never allow a child under 6 years on upper bunk.
*Only use mattress which is 74"- 75" long and 37 1/2"- 38 1/2" wide
and maximum 9" high on upper and lower bunk.
* Ensure thickness of mattress and foundation combined does not
exceed 9"and mattress is at least 5"below upper edge of guardrails.
* Use guardrails on both sides of upper bunk.
* Prohibit horseplay on or under bed(s).
* Prohibit more than one person on the upper bunk.
* Use ladder for entering and leaving upper bunk.
STRANGULATION HAZARD
* Never attach or hang items to any part of the bunk bed that are not
designed for use with the bed; for example, but not limited to hooks,
belts, and jump ropes.
DO NOT REMOVE THIS LABEL
CERTIFICATION LABEL
This bunk bed model has been tested by an
independent laboratory and is in compliance
withASTM F-1427 Standard Consumer Safety
Specification For Bunk Beds and the Government
Code of Federal Regulations 1213 and 1513.
P1
001
RODUCT NAME / MODEL: TT
TWIN/TWIN BUNK BED
FACTORY CODE : # MADE IN BRAZIL
349
DISTRIBUTED BY:
Donco Trading Co.
Fort Worth, TX 76140
ORDER NUMBER:
13S
DATE OF MANUFACTURE :
SEPTEMBER / 2015
CERTIFICATION LABEL
This bunk bed model has been tested by an
independent laboratory and is in compliance
withASTM F-1427 Standard Consumer Safety
Specification For Bunk Beds and the Government
Code of Federal Regulations 1213 and 1513.
P1
001
RODUCT NAME / MODEL: TT
TWIN/TWIN BUNK BED
FACTORY CODE : #MADE IN BRAZIL
349
DISTRIBUTED BY:
Donco Trading Co.
Fort Worth, TX 76140
ORDER NUMBER:
13S
DATE OF MANUFACTURE :
SEPTEMBER / 2015
09
10
4,0 x 30 Screw
Qty
H09
H
H
H
H
H
H
H
H
11
11
11
TO HELPPREVENT SERIOUS OR FATALINJURIES FROM
ENTRAPMENT OR FALLS:
*Never allow a child under 6 years on upper bunk.
*Only use mattress which is 74"- 75" long and 37 1/2"- 38 1/2" wide
and maximum 9" high on upper and lower bunk.
* Ensure thickness of mattress and foundation combined does not
exceed 9"and mattress is at least 5"below upper edge of guardrails.
* Use guardrails on both sides of upper bunk.
* Prohibit horseplay on or under bed(s).
* Prohibit more than one person on the upper bunk.
* Use ladder for entering and leaving upper bunk.
STRANGULATION HAZARD
* Never attach or hang items to any part of the bunk bed that are not
designed for use with the bed; for example, but not limited to hooks,
belts, and jump ropes.
DO NOT REMOVE THIS LABEL
TO HELPPREVENT SERIOUS OR FATALINJURIES FROM
ENTRAPMENT OR FALLS:
*Never allow a child under 6 years on upper bunk.
*Only use mattress which is 74"- 75" long and 37 1/2"- 38 1/2" wide
and maximum 9" high on upper and lower bunk.
* Ensure thickness of mattress and foundation combined does not
exceed 9"and mattress is at least 5"below upper edge of guardrails.
* Use guardrails on both sides of upper bunk.
* Prohibit horseplay on or under bed(s).
* Prohibit more than one person on the upper bunk.
* Use ladder for entering and leaving upper bunk.
STRANGULATION HAZARD
* Never attach or hang items to any part of the bunk bed that are not
designed for use with the bed; for example, but not limited to hooks,
belts, and jump ropes.
DO NOT REMOVE THIS LABEL
11
PREDRILLED
MARKS
Hook Ladder
Qty
F02
3,5 x 20 Screw
IQty
06
Qty
10
C7,0 x 50 Screw Hex Screwdriver
Qty
K01
C
C
C
C
CC
K
C
CC
C
C
F
F
I
I
I
I
13
14
15
15
15
15
15
LADDER
F
N
NQty
02
Qty
O02
I
I
I
O
O
O
12
440,0 x Screw440,0 x Screw
JQty
02
J
J
17
J
J17
17
13
CERTIFICATION LABEL
This bunk bed model has been tested by an
independent laboratory and is in compliance
withASTM F-1427 Standard Consumer Safety
Specification For Bunk Beds and the Government
Code of Federal Regulations 1213 and 1513.
P1001
RODUCT NAME / MODEL: TT
TWIN/TWIN BUNK BED
FACTORY CODE : #MADE IN BRAZIL
349
DISTRIBUTED BY:
Donco Trading Co.
Fort Worth, TX 76140
ORDER NUMBER:
13S
DATE OF MANUFACTURE :
SEPTEMBER / 2015
3,5 x 20 Screw
IQty
04
I
TO HELPPREVENT SERIOUS OR FATALINJURIES FROM
ENTRAPMENT OR FALLS:
*Never allow a child under 6 years on upper bunk.
*Only use mattress which is 74"- 75" long and 37 1/2"- 38 1/2" wide
and maximum 9" high on upper and lower bunk.
* Ensure thickness of mattress and foundation combined does not
exceed 9"and mattress is at least 5"below upper edge of guardrails.
* Use guardrails on both sides of upper bunk.
* Prohibit horseplay on or under bed(s).
* Prohibit more than one person on the upper bunk.
* Use ladder for entering and leaving upper bunk.
STRANGULATION HAZARD
* Never attach or hang items to any part of the bunk bed that are not
designed for use with the bed; for example, but not limited to hooks,
belts, and jump ropes.
DO NOT REMOVE THIS LABEL
I
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Donco 1001 Assembly Instructions
-
-
-
-
-
-
-
-
-
Other documents
-
Julian Bowen NOV001 Assembly Instructions
-
Donco Kids 1573 Assembly Instructions Manual
-
TRENDWOOD Piper Twin/Full Bunk Bed Owner's manual
-
Hillsdale Furniture 2178-021 Operating instructions
-
ROOMS TO GO 3744440P Assembly Instructions
-
-
-
-
-
Coaster 460071 Assembly Instructions Manual
