HDBaseT Ultra Slim Extender Kit
HDMI 2.0, 4K2K@60Hz 4:4:4, up to 100M
Operating Instruction
Thank you for purchasing this product. For optimum performance and safety,
please read these instructions carefully before connecting, operating or
adjusting this product. Please keep this manual for future reference.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or operate this equipment and
before connecting the power supply.
Please keep the following in mind as you unpack and install this equipment:
Always follow basic safety precautions to reduce the risk of fire, electrical
shock and injury to persons.
To prevent fire or shock hazard, do not expose the unit to rain, moisture or
install this product near water.
Never spill liquid of any kind on or into this product.
Never push an object of any kind into this product through any openings or
empty slots in the unit, as you may damage parts inside the unit.
Do not attach the power supply cabling to building surfaces.
Use only the supplied power supply unit (PSU). Do not use the PSU if it is
damaged.
Do not allow anything to rest on the power cabling or allow any weight to be
placed upon it or any person walk on it.
To protect the unit from overheating, do not block any vents or openings in the
unit housing that provide ventilation and allow for sufficient space for air to
circulate around the unit.
2
Operating Instruction
9.MAINTENANCE
Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner of
benzine to clean this unit.
10.PRODUCT SERVICE
(1) Damage requiring service:
The unit should be serviced by qualified service personnel if:
(a) The DC power supply cord or AC adaptor has been damaged;
(b) Objects or liquids have gotten into the unit;
(c) The unit has been exposed to rain;
(d) The unit does not operate normally or exhibits a marked change in
performance;The unit has been dropped or the cabinet damaged.
(2) Servicing Personnel: Do not attempt to service the unit beyond that
described in these operating instructions. Refer all other servicing to authorized
servicing personnel.
(3) Replacement parts: When parts need replacing ensure the servicer uses
parts specified by the manufacturer or parts that have the same characteristics
as the original parts. Unauthorized substitutes may result in fire, electric shock,
or other Hazards.
(4) Safety check: After repairs or service, ask the servicer to perform safety
checks to confirm that the unit is in proper working condition.
11.WARRANTY
If your product does not work properly because of a defect in materials or
workmanship, our Company (referred to as "the warrantor" ) will, for the length
of the period indicated as below, (Parts(2)Year, Labor(90) Days) which starts
with the date of original purchase ("Limited Warranty period"), at its option
either(a) repair your product with new or refurbished parts, or (b) replace it
with a new of a refurbished product. The decision to repair or replace will be
made by the warrantor.
During the "Labor" Limited Warranty period there will be no charge for labor.
During the "Parts" warranty period, there will be no charge for parts. You must
mail-in your product during the warranty period. This Limited Warranty is
extended only to the original purchaser and only covers product purchased as
new. A purchase receipt or other proof of original purchase date is required for
Limited Warranty service.
10
Operating Instruction
CONTENTS
1.INTRODUCTION...............................................................................4
2.APPLICATIONS.................................................................................4
3. PACKAGE CONTENTS...................................................................4
4. SYSTEM REQUIREMENTS...........................................................4
5. FEATURES........................................................................................5
6. SPECIFICATIONS...........................................................................5
7. OPERATION CONTROLS AND FUNCTIONS...........................6
7.1 Transmitter Front and Rear...........................................................6
7.2 Receiver Front and Rear Panels....................................................7
7.3 Firmware Update............................................................................8
8. CONNECTION DIAGRAM............................................................9
9. MAINTENANCE..............................................................................10
10. PRODUCT SERVICE.....................................................................10
11. WARRANTY.....................................................................................10
3
Operating Instruction
1. INTRODUCTION
This Model allows HDMI signals to be transmitted over a Single CAT5e/6 cable. This
solution has the added features of RS232 and 2-way IR control functionality over the same
CAT5e/6 cable. It can extend 4K@60Hz YUV4:4:4 over a HDBaseT link and upto
100M.The slimmest HDBaseT design, making it perfect to mount behind ultra thin TVs.
2. APPLICATIONS
Household entertainment sharing and control
Lecture room display and control
Showroom display and control
Meeting room presentation and control
Classroom display and control
3. PACKAGE CONTENTS
1Main unit
2Operating instructions
324V1A DC power supply
41xIR TX unit
51xIR RX unit
62 Phoenix plugs for RS232 cable termination
4. SYSTEM REQUIREMENTS
Input HDMI source equipment such as DVD/Blu-ray player,host PC/Laptop and HDMI
equipped output display (TV or monitor) with amplifier or active speakers.
4
Operating Instruction
8. CONNECTION DIAGRAM
9
Operating Instruction
7.3 Firmware Update:
①The user should use the CD in colorbox,read and install software
in PC;
②Connect unit to PC with usb cable from micro usb port,
click software to select correct usb port:
(Note: if PC is unable to identify the correct usb port,please install the
driver from CD first)
③Type in “A2” in PORT and select PATH with update file then click UPDATA
wait for update till display “Succeed” in red frame:
(Note:please differentiate the firmware for TX and RX before upgrade)
8
Operating Instruction
5. Features
Bandwidth up to 18Gbps, resolution up to 4K2K@60hz YUV 4:4:4
Transmit up to 150m under 1080p,100m under 4K
Support HDR10
Support KVM and USB2.0
Support Bi-directional wide band IR and RS232 Pass through
Support Dual POC (Receiver powered by transmitter or transmitter powered by
Receiver)
Support HDCP2.2/ HDCP1.4 Compliant
Support Copy local and remote EDID functionality
Supports audio extractor rate up to 192kHz
Support PCM7.1, Dolby, DTS
With micro USB port for firmware upgrade
6. Specifications
Operating Temperature Range -5 to +40°C (23 to +104 °F)
Operating Humidity Range 5 to 90 % RH (no condensation)
Input Video Signal 0.5-1.0 volts p-p
Input DDC Signal 5 volts p-p (TTL)
Video Format Supported
DTV/HDTV;
4K/1080P/1080i/720P(50HZ)/576P/480P/576i/480i
Output Video HDMI 2.0+HDCP1.4/2.2
Output Audio Support PCM,DTS-HD, Dolby-HD
Maximum Transmission Distance 150 meters for 1080P, 100 meters for 4K
Power Supply 24V1A
Poc Power from TX to RX over Cat5/6 cable
Power Consumption 14Watts
Dimensions 172.4mmH×113.2mmW×24mmD
Mass (Main unit) 1.1Kg (Pairs)
5
Operating Instruction
7. OPERATION CONTROLS AND FUNCTIONS
7.1 Transmitter Front and Rear
①IR In: Connect to the supplied IR blaster cable for IR signal transmission.
Place the IR blaster in direct line-of-sight of the equipment to be controlled.
②IR Out: Connect to the supplied IR blaster cable for IR signal transmission.
Place the IR blaster in direct line of sight of the equipment to be controlled.
③USB Type A for extension
④USB Type B for connection
⑤DIP Switch: Switch to“ 0 ”transmit upto 100m under 4K@60Hz.
Switch to“1”transmit upto 150m under 1080P@60Hz.(Before power on, TX
and RX must be selected to 0 or 1 at the same time. Please do not switch it in
the working process)
⑥EDID Switch: Switch to“0”copy EDID from display of receiver(remote
EDID mode).Switch to“1”copy EDID from loopout display of transmitter(local
EDID mode).
⑦Indicator of HDMI
⑧Indicator of power input
⑥Note: EDID copy function on transmitter do not support 150M long
distance, when it is long distance mode, the EDID only support 1080P@60Hz.
①DC 24V input
②Update: USB port to update the firmware
③RS232 in: Connect to a PC or laptop with phoenix terminal for
the transmission of RS232 commands
④HDBT out: Connect to the receiver unit with a single CAT5e/6 cable for
transmission of all data signals
⑤HDMI loop out: Connect to a HDMI equipped TV/Monitor for display of
the HDMI input source signal
⑥HDMI In: Connect to HDMI source equipment such as DVD or Blu-ray
player
④Note: do not connect projector directly which will break HDBT port,
please contact us and require technical support for such application.
6
Operating Instruction
7.2 Receiver Front and Rear Panels
①IR Out: Connect to the supplied IR blaster cable for IR signal transmission.
Place the IR blaster in direct line of sight of the equipment to be controlled.
②IR In: Connect to the supplied IR blaster cable for IR signal transmission.
Place the IR blaster in direct line-of-sight of the equipment to be controlled.
③USB Type A for extension
④DIP Switch: Switch to“0”transmit upto 100m under 4K@60Hz.
Switch to“1”transmit upto 150m under 1080P@60Hz.(Before power on, TX
and RX must be selected to 0 or 1 at the same time. Please do not switch it in
the working process)
⑤Audio Switch: Switch to“0”extract Audio and output.Switch to“1”close
extraction Audio output(analog audio and SPDIF).
⑥Indicator of HDMI
⑦Indicator of power input
①DC 24V input
②Update: USB port to update the firmware
③RS232 Out: Connect to the device that is to be controlled via phoenix
terminal by RS-232 commands
④HDBT in: Connect to the transmitter unit with a single CAT5e/6 cable for
transmission of all data signals
⑤HDMI output: Connect to a HDMI equipped TV/Monitor for display of
the HDMI input source signal
⑥SPDIF out
⑦Analog audio out
7
-
1
-
2
-
3
-
4
-
5
-
6
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
DirekTronik 20103266 Owner's manual
-
-
ALFAtron ALF-MUH88E GEN2 18Gbps 8×8 HDBaseT Matrix User manual
-
CYP PUV-1082-4K22 User manual
-
-
Vanco EVEXHDARC User manual
-
CYP PUV-1230PL-RX User manual
-
-
-