Nira 6B Arctic ECO Instruction and Maintenance Manual

Brand: Nira

Model: 6B Arctic ECO

Type: Instruction and Maintenance Manual

This manual is also suitable for

Nira 6B Arctic ECO is a high-quality hand pump with primarily rust-proof construction. It is suitable for pumping liquids such as water, oil and glycol. The Nira 6B Arctic ECO is ideal for applications such as pumping water for sauna use and pumping oil from tanks. It features ECO seals and is ideal for applications such as pumping fuels in sub-zero conditions.

Nira 6B Hand Pump

Instruction and Maintenance Manual

Contents

1 Nira 6B ............................................................................................................................................................................ 4

2 Use .................................................................................................................................................................................... 5

2.1 Before using ......................................................................................................................................................... 5

2.2 Installation ........................................................................................................................................................... 5

2.3 Using the pump .................................................................................................................................................. 5

3 Maintenance ................................................................................................................................................................. 6

4 Technical details ......................................................................................................................................................... 9

5 Limited international warranty ......................................................................................................................... 10

6 Frequently asked questions ................................................................................................................................ 11

7 Contact information ................................................................................................................................................ 12

Always read instructions carefully before use.

Familiarise yourself with the parts of the product and any markings before use.

1 Nira 6B

The Nira 6B is a high-quality hand pump with primarily rust-proof construction. The 6B is suitable for pumping

liquids such as water*, oil and glycol. Easy to maintain and offering a long service life, the 6B is ideal for

applications such as pumping water for sauna use and pumping oil from tanks. The Nira 6B is available also

with VITON seals for pumping liquids such as petroleum, and EPDM seals for pumping glycol. The Nira 6B

Arctic features ECO seals and is ideal for applications such as pumping fuels in sub-zero conditions.

*not suitable for drinking water

Follow all instructions to avoid damage or injury

The parts of the Nira 6B pump are shown below (Figure 1).

Other product versions

Nira 6B

VITON

Nira 6B

EPDM

Nira 6B Arctic

ECO

Flange gasket R611V R611E R611

Shaft seal R603V R603E R603ECO

Plunger seal (1989 and earlier) R56V R56E R56ECO

Plunger seal R606V R606E -

Cylinder seal R604V R604E R604ECO

Bottom valve R609V R609E R609ECO

2 Use

2.1 Before using

Before first using the pump please ensure that the packaging is intact and that there are no signs of damage

during transit. Any signs of damage should be reported to the delivery company and to the supplier within two

(2) days of receiving the goods. Ensure that all parts on the packing list are included in the delivery. Contact

the seller immediately if there are any problems with the delivery.

2.2 Installation

The pump is mounted to a vertical surface through the two holes in the pump body. The pump flanges have

either ¾” or 1” threads to which various kinds of suitable pipes or connectors can be fitted. Be sure to check

that all connections are tight.

2.3 Using the pump

The pump is ready for use as soon as it is installed. The pump can lift up to 4 metres without a bottom valve

fitted to the suction line, and up to 8 metres with a bottom valve. Without height differences the length of the

suction pipe can be tens of metres. Please note that the length of the suction pipe and the height difference

between the pump and the water source affect the pumping capacity.

If the pump is used for pumping water and there is a risk of freezing, make sure that the pump is emptied of

water thoroughly after use. If the pump is permanently attached to an oil container make sure that the container

cannot be unintentionally drained through the siphon effect. An accessory designed to prevent draining due

to the siphon effect is available for containers with a 2” internal thread from Nira’s online store (article P61808).

The same pump must not be used for pumping both water and oil

This product is not suitable for pumping drinking water or foodstuffs

Ensure that there is sufficient space around the pump for safe operation

Before using the pump make sure that nothing is in the way of the handle

Ensure that all the parts of the product are firmly fixed in place before use

Check the condition and operation of the pump regularly (at least once a year)

Do not use a defective or leaking pump

3 Maintenance

The Nira 6B pump does not require any regular maintenance. This chapter describes the process of changing

the seals in the pump.

The pump should only be serviced or repaired by a capable person

Only use original parts

Before commencing work ensure that the pump is empty of liquid and that the system is not

pressurised

Ensure that all parts are properly tightened after maintenance

Ensure that the pump works as it should after maintenance work

Changing the flange gasket

Changing the bottom valve

Changing the cylinder seals

Changing the plunger body and seal (R606)

Changing the plunger seal (R56)

Changing the shaft seal

4 Technical details

Nira 6B

 Material: Cast silumin, steel, stainless steel

 Seal material: Nitrile / VITON / EPDM / ECO

 Max. Capacity: c. 40l/min

 Weight: 3.3kg

 Flange threads: ¾” or 1”

 Max. pressure: continuous 1 Bar, peak 3 Bar

 Packaging dimensions: 500 x 245 x 140mm

5 Limited international warranty

The warranty period is determined in the agreement documents. Unless otherwise agreed, the warranty period

for manufacturing and material defects is 2 years.

Warranty Conditions

The warranty is only valid if the warranty demand is presented together with the original invoice or sales slip

or (order) confirmation.

Nira’s obligations are limited to the repair or, at its discretion, replacement of the product or the defective part.

Defective parts shall be replaced with new or equivalent “as new” parts. If necessary, the entire product shall

be exchanged with an identical or functionally identical product. The value of the warranty is always limited to

the value of the defective product. Nira shall not in any event be liable for any direct or indirect consequential

loss. The defective parts removed from a product as part of a warranty case shall become the property of Nira

and shall be retained for by the End Customer for Nira, if necessary. If these parts cannot be returned to Nira

upon request, Nira is entitled to charge for a corresponding amount. When genuine Nira parts are installed in

a Nira product under warranty, only the remaining warranty period of the repaired device applies.

Warranty repairs must be carried out by Nira or authorised Nira dealers. No reimbursement will be made for

repairs carried out by a non-Nira representative, and any such repair work or damage to the products caused

by such repair work will not be covered by this warranty.

This product is not considered to be defective in materials nor workmanship if it requires adaptation in order

to conform to other local or national technical or safety standards.

This warranty covers none of the following:

a) Periodic checks, maintenance and repair or replacement of parts due to normal wear and tear

b) Costs relating to transport, removal or installation of the product;

c) Misuse, including the failure to use this product for its normal purposes or incorrect installation;

d) Damage caused by lightning, water, fire, acts of God, natural catastrophes, war, public disturbances or any

other cause beyond the control of Nira;

e) Spillage of chemicals or liquids, or use of any other hazardous or non-instructed substances, which may

affect the product;

f) Minor defects or deviations from the product specifications which are immaterial, negligible or trivial as

regards to the value or the functioning of the product

Proceeding in a Warranty Case

The following information is an explanation of what you must do in the case of a warranty claim. First, please

contact your Nira dealer and describe the problem (possibly with photographs or videos) and inform Nira of

the product type and date of purchase. Nira’s technicians will help to diagnose defects and malfunctions, and

are often capable of eliminating the malfunction over the phone.

In the event that warranty service is required, you should return the product to the dealer from whom it was

purchased, or directly to Nira’s factory in Finland. In this case, the customer is responsible for the dispatch and

insurance of the product, and the transport and insurance costs shall be borne by the customer. Nira shall

assume the costs for the materials / spare parts and the labour costs as required, as well as the standard

return transportation to the sender. In case of difficulty, details of local dealers are available online at

www.nira.fi. You may also contact the service centre in Finland (e-mail: [email protected]).

The guarantee will become void if:

 A Nira product has been used in unspecified conditions or if the product is allowed to come into direct

contact with chemicals or agents other than those specified in the manual;

 A Nira product is equipped or used with parts that have not been approved by Nira for the product in

question;

 Someone other than a person authorised by Nira has serviced/repaired or otherwise modified the

device and these measures have caused a fault in the product.

Warranty terms in Finnish language are available at www.nira.fi.

6 Frequently asked questions

Q: Do Nira pumps freeze?

A: The Nira 6B must be completely emptied of water (or other liquids prone to freezing) before the

temperature descends below 0°C. To empty the pump, remove the suction pipe and operate the pump until

it is completely empty. Remember to also empty the suction pipe before winter. The durability of seals in

the winter depends on the seal material and the liquid being pumped.

Q: Do Nira pumps rust?

A: Hand pumps feature a steel mechanism which may rust over time. The Nira 6B is also available with all

parts in stainless steel.

Q: What liquids can be pumped with the Nira 6B hand pump?

A: Check the implementation chart. The aluminium-bodied Nira 6B is not suitable for pumping Ad Blue fuel

additive.

Q: From what depth can the 6B hand pump lift?

A: 4 metres without a bottom valve and 8 metres with a bottom valve fitted. 1 metre of lift corresponds to

around 10 metres of horizontal pumping (suction or pressure).

Q: Can the handle of the 6B pump be turned downwards?

A: This is not possible after purchase; a pump can, however, be ordered from the factory with the handle

downwards.

Q: Does the hand pump stop the siphon effect?

A: No. After pumping stops, if the end of the discharge pipe is lower than the level of liquid being pumped,

the liquid will continue to flow until the end of the suction line is no longer in the liquid (the siphon effect). An

optional accessory designed for containers with a 2” internal thread is available to stop the siphon effect.

7 Contact information

Manufacturer Spare Parts:

Nira Pumps Oy Authorised dealers or

PL54 the Nira online store

38210 Sastamala

FINLAND

Tel. +358 10 830 6770

E-mail: [email protected]

www.nira.fi

Model: ________________________________________________________

Purchase date: _________________________________________________

Nira 6B Arctic ECO Instruction and Maintenance Manual

Brand: Nira

Model: 6B Arctic ECO

Type: Instruction and Maintenance Manual

This manual is also suitable for

Download PDF

report

Nira 6B Arctic ECO Instruction and Maintenance Manual

This manual is also suitable for

Nira 6B Arctic ECO Instruction and Maintenance Manual

Other documents