SHENZHEN SHIDU DIGITAL CO.,LTD
Built-in MP3:
◎USB slot: Support USB flash drive,
◎TF card slot: Support TF card
◎
Support MP3 WAV W MA FLAC APE format
，
prominent sound quality
，
Hi-Fi stereo design
，
bring yo u whole new Music experience.
◎
Input: To select AUX in mode, Bluetooth mode, TF card mode & USB flash drive ,FM mode
◎PlAY/PAUSE: In audio playing mode, press it to pause; press it again to play.
◎Pre/PAUSE: Press to select previous or next audio file.
◎ Key: Press to sw itch between accompaniment and original in audio playing mode.
FM Function:
◎Switch on the speaker, short press "INPUT" to choose the FM mode with the screen showing Radio frequency; Long press to enter into
automatic channels searching; After searched successfully, the device will save the channel automatically. And pl
ease press or to
choose the saved channels.
AUX FUNCTION:
1. Connected an AUX cable with another device,please short press"INPUT" to AUX mode.
2. “MIC PRIORITY” function is worked during the AUX mode
REC Function:
1.
Connected with wireless or wired microphone, in any mode, press and hold on to enter into REC mode to record with inserting storage (USB
flash drive or TF card). Press ”REC/PLAY” again to stop recording, save ”REC/PL AY” the audio files and play the recordings.
2.In music mode, press ”REC/PLAY” to enter into recordings play back mode with inserting storages (which have recordings). It will play the last
recording by default and please press or to select the previous and next recordings.
3.
In recordings play back mode, please press “LOOPING” on remote control to select single cycle and a ll cycle.
Bluetooth Function:
1.Switch on the speaker and press "INPUT" to enter into Bluetooth mode. (The Bluetooth mode is ready with voice prompt “Bluetooth is waiting
for connection” and “BLUE” on the screen.)
2. Turn on the Bluetooth function of your devices and search “H2”. Click and it will be successfully with a voice prompt “Bluetooth is
connected”.
3.
After successful connection, it’s possible to play the audio files(Teaching Material,Training Material,Music) in your devices.It can also work with
the wireless microph one ,to realize Poetry recitation accompanied by music and Sy nchronous karaoke.
Double devices TWS Bluetooth Double Channel
Step1: Open two devices and press " INPUT " to enter into Bluetooth mode .Long press " INPUT "of one device to enter into pairing status .Bluetooth
icon of another will be light constantly which means TWS function is activated.
Step2: Enter into “ Settings “ of mobile and turn on Bluetooth function. Then please search " H2 " and conn
ect. Two devices play simultaneously
achieve a surrounded stereo sound.
Step3: Long press " INPUT " one of them, quit out the function.
About Charging:
1.Please use the standard adapter, the other end connects with the power supply AC 110~240V to charge. Please unplug the adapter timely after
fully charged (the charging time is normally 6~8 hours).
