Wave 3S-2273 User guide

Brand
Wave
Model
3S-2273
Type
User guide
Mode - short press Bluetooth to
switch between BT, TF, AUX,
USB
Speaker
LED Light indicator
Change light - short press
light button
Base on / off - short press bass
button
Turn off light - long press
light button
Reset - use a pin, press the
AUX port for 6 secs to
automatically reset the
speakers and turn it off.
Turn on - long press power
button for 2 seconds to turn on
Previous song - long press
volume down button
The speaker lights will interact with the state of the speaker.
When the music is playing the light will dance with the rhythm of the music.
When the music pauses, the lights will also respond.
The lights under the Bluetooth and bass button will indicate charge level. When
the battery is low the LED lights will flash red and a low power sound notification
will be played.
Next song: long press volume
up button
Volume up - short press
volume up (16 levels in total)
Volume down - short press
volume down (16 levels in total)
Play - short press play button Pause - short press play button
Turn off - long press power
button for 2 seconds to turn off
Pairing - Long press play
button
Disconnect - long press
Bluetooth
Reconnect mic - unscrew the
housing on the microphone.
Whilst near the speaker, long
press the UHF button until the
LED light flashes. Turn on the
speaker, and wait 10-30
seconds. Short press the UHF
button again until the LED
stops flashing.
Want to stay in touch?
Follow us on @waveaudioau
©2022 3sixT. All rights reserved.
Input Speaker / Mic: 7.4V / 3.7V
Battery Speaker / Mic: 4500mAh / 1800mAh
Pairing name: Wave-3S-2273
  • Page 1 1

Wave 3S-2273 User guide

Brand
Wave
Model
3S-2273
Type
User guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents