Sanus VLF613 Installation guide

VLF

613

INSTRUCTION MANUAL

GET IT

RIGHT

THE FIRST TIME

Follow this step-by-step

instruction manual to

speed up your installation.

2

WE’RE HERE TO HELP

Our US-based install experts

are standing by to help.

Call us at:

800-359-5520

Or, chat at:

SANUS.com/chatSP

Get it right the ﬁrst time.

HeightFinder™ shows you

where to drill.

Check it out at:

SANUS.com/1172

Want to watch a video that

shows how easy this DIY

project will be?

Watch it now at:

SANUS.com/2575

Recommended placement

3

Does your TV

(including accessories)

weigh MORE than

125 lbs. (56.6 kg)?

IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL PRIOR TO USE

No

—

Perfect!

Yes

—

This mount is NOT compatible. Visit MountFinder.Sanus.com or call

1-800-359-5520 (UK: 0800-056-2853) to ﬁ nd a compatible mount.

Please read through these instructions completely to be sure you’re comfortable with this easy install process.

Also check your TV owner’s manual to see if there are any special requirements for mounting your TV.

If you do not understand these instructions or have doubts about the safety of the installation, assembly or use

of this product, contact Customer Service at 1-800-359-5520 (UK: 0800-056-2853).

Do you have

all the tools

needed?

Before getting started, let’s make sure this mount is perfect for you!

1

2

3

4

What is your

wall made of?

Unsure?

Drywall with

wood studs?

Solid concrete or

concrete block?

125 lbs.

(56.6 kg)

CAUTION: Avoid potential personal injuries and property damage!

● This product is designed for use in wood stud, solid concrete, and concrete block walls - DO NOT install into drywall alone

● The wall must be capable of supporting ﬁ ve times the weight of the TV and mount combined

● Do not use this product for any purpose not explicitly speciﬁ ed by manufacturer

● Manufacturer is not responsible for damage or injury caused by incorrect assembly or use

Call Customer Service:

1-800-359-5520 (UK: 0800-056-2853)

Perfect! Perfect!

Ready to

begin?

Para Español ver página 28

CAUTION:

DO NOT install

into drywall alone

Wood Stud Install

Concrete Install

AwlPencil Level Stud FinderScrewdriverTape

Measure

7/32 in.

(5.5 mm)

Wood

Drill Bit

Electric Drill Hammer

1/2 in.

(13 mm)

Socket

Wrench

Drill Bit

3/8 in.

(10 mm)

Concrete

4

Before you begin

HARDWARE BAG

RELAX!

You only use four

of the TV screws.

Remove the stand from your TV

— if attached.

Install any accessories

you may have purchased — if they

require the TV to be removed from the

wall for assembly. The TV is removable

for future accessory purchases.

Don’t stress out when you see

all the hardware included.

Extra TV screw sizes and lengths

are provided to ﬁ t most TVs.

5

Soft clean surface

CAUTION: Avoid potential

Y

X

S

Let’s Go

Step-by-Step illustrations

speed up your installation.

Don’t get it? Read the detailed

explanation below each step.

Secure part

X

to housing

Y

using screw

S

.

1

ASSEMBLE

TIP:

Each component has a number

designation. See PAGE 6.

Read ALL CAUTION warnings.

These are IMPORTANT!

Protect the face of your TV

when laying it down for installation.

NOTE: Read read Dually Noted read

TIP: Read That's Helpful read read

IMPORTANT: Read Important read

Read Important Stuff read read rea

Must Read read read read read read

Read read read Safety First read re

6

Parts and Hardware for STEP 1

M8 x 25mm

M6 x 12mm

M6 x 35mm

M8 x 45mm

M8 x 50mm

M8 x 35mm

M8 x 16mm

M8 x 20mm

5mm 22mm

2.5mm

TV Bracket

01

x1

TV Washers

Spacers

02

x4

07

x4

06

x4

03

x4

05

x4

08

x4

04

x4

09

x4

10

x4

11

x4

12

x4

13

x4

TV Screws M8 TV Screws M6

Attach TV Bracket to TVSTEP 1

WARNING:

This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included

and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts!

NOTE: Not all hardware included will be used.

7

If your TV included inset spacers or wall mount

adapters, see Troubleshooting on PAGE 27.

TV Bracket

TV Bracket TV Bracket TV Bracket

TV Bracket

a

b

CAUTION: Verify adequate thread engagement with your

screw/washer/spacer combination AND the TV bracket. (STEP 1.2).

TOO SHORT will not hold the TV and TOO LONG will damage the TV.

M6

M8

1.1 Select TV Screws

Determine which screw diameter (M6 or M8) fits the four

mounting holes on the back of your TV.

1.2 Spacer Determination

For

flat-back TVs,

no

spacers

11

,

12

or

13

are required.

For rounded-back TVs, cable interference or

inset holes, spacers

11

,

12

or

13

to create

extra space between the TV and TV bracket.

Too Short Correct Too Long

Round Back

Cable Interference

Inset Holes

Flat Back

1211 13

8

01

Loosen the two lower fasteners enough to slide the outer columns

on TV bracket

01

.

(Indicated with arrows).

1.3 Assemble TV Bracket

01

1

LOOSEN

2X

Adjust TV bracket

01

to line up with your TV's mounting hole pattern.

2

ADJUST TO FIT TV

9

Tighten the two lower fasteners, and verify the two middle lower/

upper fasteners are tightened. (Indicated with arrows).

3

CENTER

01 01

4

TIGHTEN

4X

Be sure the center column is evenly spaced between the outer columns.

Do not overtighten the fasteners. Tighten only until snug.

CAUTION:

Avoid potential personal injury or property damage!

10

01

4X

2

SECURELY TIGHTEN

a

Flat-back TVs

b

Rounded-back TVs / Extra Space

11 12 1310 10

Install using the spacer, screw and washer combination you

selected for your TV.

0202 0909

1.4 Attach TV Bracket Assembly to TV

Center the TV bracket

01

over your TV hole pattern as shown,

making sure the bracket is level. Note the orientation of the bracket.

1

POSITION

Top of TV

11

Fischer UX10 x 60R

5⁄16 in. x 3 ½ in.

17

x4

18

x4

Parts and Hardware for STEP 2

Lag Bolt

Concrete Anchor

For concrete installations ONLY

CAUTION: Do not use in drywall or wood

15

x1

14

x1

16

x2

Wall Plate /

Arm Assembly

Wall Plate

Template

Wall Plate Cover

(Attached)

Attach Wall Plate to Wall

STEP 2

WARNING:

This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are

included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service.

Never use damaged parts!

NOTE: Not all hardware included will be used.

12

Max. 5/8 in. (1.5 cm)

Min. 16 in. (40.6 cm)

Min. 3 ½ in. (8.9 cm)

Min. 1 ½ in. (3.8 cm)

CAUTION: Avoid potential

personal injury or property damage!

● Drywall covering the wall

must not exceed 5/8 in. (1.5 cm)

● Minimum wood stud size:

nominal 2 x 4 in. (5.1 x 10.2 cm)

actual 1 ½ x 3 ½ in. (3.8 x 8.9 cm)

● Minimum horizontal space

between fasteners:16 in. (40.6 cm)

● Stud centers must be veriﬁ ed

STEP 2A Wood Stud Installation

Locate the studs using a

stud finder.

Find the edges of the studs

using an awl or small drill bit.

Mark the centers of the

studs with a pencil.

1

LOCATE

2

VERIFY

3

MARK

13

4

REMOVE COVERS

2X

16

15

14

Place the wall plate template

14

at your desired height and position

the slotted holes over your stud center lines. Level and tape in place.

Remove wall plate covers

16

by pushing the outer edge inward,

while pulling the cover forward.

TIP:

To calculate your precise wall plate location, check out

our HeightFinder at sanus.com [www.sanus.com/1172].

sanus.com

/1172

HeightFinder™

Visit

5

POSITION TEMPLATE

14

15

4X

17

4X

3 ½ in. (8.9 cm)

7/32 in.

(5.5 mm)

STEP 2A (continued)

Install the four lag bolts

17

and firmly tighten until they are pulled flush

against the wall plate/arm assembly

15

.

Drill the four pilot holes using a 7/32 in. (5.5 mm) diameter drill bit.

IMPORTANT: Pilot holes must be drilled to a depth of 3 ½ in. (8.9 cm).

6

DRILL

Go to STEP 3 on PAGE 18.

7

SECURELY TIGHTEN

All four lag bolts

17

MUST BE firmly tightened to prevent

unwanted movement of the wall plate

15

.

Ensure the wall plate is

securely fastened to the wall before continuing on to the next step.

CAUTION:

Avoid potential personal injury or property damage!

CAUTION:

Be sure you drill into the CENTER of the stud.

15

Solid Concrete or Concrete Block Installation

● Mount the wall plate

15

directly onto the concrete surface

● Minimum solid concrete thickness: 8 in. (20.3 cm)

● Minimum concrete block size: 8 x 8 x 16 in. (20.3 x 20.3 x 40.6 cm)

● Minimum horizontal space between fasteners: 24 in. (61.0 cm)

● For Concrete applications, the arm assembly of wall plate/arm

assembly

15

must remain centered in the wall plate. Keep

this in mind when selecting the wall plate location.

STEP 2B

CAUTION: Avoid potential personal injury or property damage!

2X

16

15

Remove wall plate covers

16

by pushing the outer edge inward,

while pulling the cover forward.

1

REMOVE COVERS

16

14

Never drill into the mortar between blocks.

CAUTION:

Never drill into the mortar between blocks.

3

DRILL

4X

CAUTION:

TIP:

To calculate your precise wall plate location, check out

our HeightFinder at sanus.com [www.sanus.com/1172].

Min. 24 in. (61.0 cm)

3/8 in.

(10 mm)

3 ¾ in. (9.5 cm)

Position the wall plate template

14

on the wall at your desired height.

Level and tape in place.

.

Drill four pilot holes using a 3/8 in. (10 mm) diameter drill bit.

IMPORTANT: Pilot holes must be drilled to a depth of 3 ¾ in. (9.5 cm).

sanus.com

/1172

HeightFinder™

Visit

STEP 2B (continued)

2

POSITION TEMPLATE

17

All four lag bolts

17

MUST BE firmly tightened to prevent

unwanted movement of the wall plate

15

.

Ensure the wall plate is

securely fastened to the wall before continuing on to the next step.

CAUTION:

Avoid potential personal injury or property damage!

15

4X

17

14

18

4X

CAUTION:

Be sure the anchors

18

are seated ﬂ ush

with the concrete surface.

CAUTION:

Install the four lag bolts

17

. Firmly tighten all four lag bolts

17

until

they are pulled flush against the wall plate/arm assembly

15

.

Insert four anchors

18

.

34

INSERT ANCHORS

5

SECURELY TIGHTEN

18

WARNING: Before starting assembly, verify this part is undamaged. If damaged, do not return the damaged item to your dealer; contact

Customer Service. Never use damaged parts!

Attach TV to Wall Plate

STEP 3

22

x1

24

x1

23

x1

Hex Key Hex Key

Knob Tool

3/16 in. 5/32 in.

3/16 in. Hex

19

x1

20

x1

Parts and Hardware for STEP 3

Cable Sleeve

Cable Holder

Securement Screw

(Cable Holder)

21

19

1501

01

15

3.1 Hang Your TV

Hang the TV/Bracket assembly

01

onto wall plate/arm assembly

15

.

1

HANG

HEAVY! You may

need assistance

with this step.

2

ATTACH

Press the bottom of the TV into the wall plate/arm assembly

15

until

you hear the lock click, securing the TV in place.

20

1501

22

20

21

To secure your cables using the cable system, go to PAGE 21 now.

If skipping the cable system, you MUST complete STEP 3 on the right.

To lock the TV in place on wall plate/arm assembly

15

, install the

cable holder

20

and securement screw

21

as shown.

The cable holder

20

and securement screw

21

MUST be in place and

tightened, to securely fasten the TV to the wall plate/arm assembly

15

.

CAUTION:

Avoid potential personal injury or property damage!

3.1 (continued)

For cable management:

Skip STEP 3 and proceed to SECTION 3.2 on PAGE 21.

Otherwise you MUST proceed with STEP 3 on the right.

IMPORTANT:

3

SECURELY TIGHTEN

Page is loading ...

Sanus VLF613 Installation guide

Sanus VLF613 Installation guide

in other languages

Related papers

Other documents