2. Digital Watchdog
  3. Blackjack DW-BJ16NASR80T

Digital Watchdog Blackjack DW-BJ16NASR80T, DW-BJ16NASxTR Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Digital Watchdog Blackjack DW-BJ16NASR80T Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
16 Bay
DW- BJ16NASR80T
DW-BJ16NASR160T
Quick Start Guide
Tel: +1 (866) 446-3595 / (813) 888-9555
Technical Support Hours: 9:00AM – 8:00PM EST, Monday thru Friday
digital-watchdog.com
Default login Information for Blackjack
ÂŽ
NAS™
Username : admin Password : admin1234
Network Attached Storage
ÂŽ
NAS
1

Quick Start Guide




16Bay
DW-BJ16NASR80T
DW-BJ16NASR160T





DefaultloginInformationforBlackjack
ÂŽ
NAS
Username:admin
Password:admin1234





Tel:+1(866)446-3595/(813)888-9555   digital- watchdog.com
TechnicalSupportHours:9:00AM–8:00PMEST,MondaythruFriday 
Network Cable 1 set Front door lock key
Power Cable 2 set HDD Screws (1 bag)
Rack Mount Kit 1 set
Rack Mount Kit Screws
(1 bag)
Rack screws not included
SUPPLIED ITEMS
Please unwrap the product, and place the product on a at place or in the place to be installed.
Make sure that you have following items supplied. If any of these items are missing or damaged, notify your vendor immediately.
Keep the packing utilities for moving or storage purposes.

Quick Start Guide
SUPPLIEDITEMS
Pleaseunwraptheproduct,andplacetheproductonaflatplaceorintheplacetobeinstalled.
Makesurethatyouhavefollowingitemssupplied.Ifanyoftheseitemsaremissingordamaged,
notifyyourvendorimmediately.Keepthepackingutilitiesformovingorstoragepurposes.



NetworkCable1set



PowerCable1set


RackMountKit1set









 
NOTE:DownloadAllYourSupportMaterialsandToolsinOnePlace
1.Goto:http://www.digital-watchdog.com/support-download/
2.Searchyouproductbyenteringthepartnumberinthe‘SearchbyProduct’searchbar.
Resultsforapplicablepartnum-berswillpopulateautomaticallybasedonthepartnumberyou
enter.
3.Click‘Search’.Allsupportedmaterials,includingmanuals,QuickStartGuide(QSG),software
andfirmwarewillappearintheresults.
 Attention:ThisDocumentisintendedtoserveasaquickreferenceforinitialset-up.
 SeetheDWSpectrumfullmanualformoreinformationoffeaturesandfunctionality.

Quick Start Guide
SUPPLIEDITEMS
Pleaseunwraptheproduct,andplacetheproductonaflatplaceorintheplacetobeinstalled.
Makesurethatyouhavefollowingitemssupplied.Ifanyoftheseitemsaremissingordamaged,
notifyyourvendorimmediately.Keepthepackingutilitiesformovingorstoragepurposes.



NetworkCable1set


Frontdoorlockkey


PowerCable1set

HDDScrews(1bag)


RackMountKit1set

RackMountKitScrews
(1bag)
Rackscrewsnot
included









 
NOTE:DownloadAllYourSupportMaterialsandToolsinOnePlace
1.Goto:http://www.digital-watchdog.com/support-download/
2.Searchyouproductbyenteringthepartnumberinthe‘SearchbyProduct’searchbar.
Resultsforapplicablepartnum-berswillpopulateautomaticallybasedonthepartnumberyou
enter.
3.Click‘Search’.Allsupportedmaterials,includingmanuals,QuickStartGuide(QSG),software
andfirmwarewillappearintheresults.
 Attention:ThisDocumentisintendedtoserveasaquickreferenceforinitialset-up.
 SeetheDWSpectrumfullmanualformoreinformationoffeaturesandfunctionality.

Quick Start Guide
SUPPLIEDITEMS
Pleaseunwraptheproduct,andplacetheproductonaflatplaceorintheplacetobeinstalled.
Makesurethatyouhavefollowingitemssupplied.Ifanyoftheseitemsaremissingordamaged,
notifyyourvendorimmediately.Keepthepackingutilitiesformovingorstoragepurposes.



NetworkCable1set


Frontdoorlockkey


PowerCable1set

HDDScrews(1bag)


RackMountKit1set

RackMountKitScrews
(1bag)
Rackscrewsnot
included









 
NOTE:DownloadAllYourSupportMaterialsandToolsinOnePlace
1.Goto:http://www.digital-watchdog.com/support-download/
2.Searchyouproductbyenteringthepartnumberinthe‘SearchbyProduct’searchbar.
Resultsforapplicablepartnum-berswillpopulateautomaticallybasedonthepartnumberyou
enter.
3.Click‘Search’.Allsupportedmaterials,includingmanuals,QuickStartGuide(QSG),software
andfirmwarewillappearintheresults.
 Attention:ThisDocumentisintendedtoserveasaquickreferenceforinitialset-up.
 SeetheDWSpectrumfullmanualformoreinformationoffeaturesandfunctionality.

Quick Start Guide
SUPPLIEDITEMS
Pleaseunwraptheproduct,andplacetheproductonaflatplaceorintheplacetobeinstalled.
Makesurethatyouhavefollowingitemssupplied.Ifanyoftheseitemsaremissingordamaged,
notifyyourvendorimmediately.Keepthepackingutilitiesformovingorstoragepurposes.



NetworkCable1set


Frontdoorlockkey


PowerCable1set

HDDScrews(1bag)


RackMountKit1set

RackMountKitScrews
(1bag)
Rackscrewsnot
included









 
NOTE:DownloadAllYourSupportMaterialsandToolsinOnePlace
1.Goto:http://www.digital-watchdog.com/support-download/
2.Searchyouproductbyenteringthepartnumberinthe‘SearchbyProduct’searchbar.
Resultsforapplicablepartnum-berswillpopulateautomaticallybasedonthepartnumberyou
enter.
3.Click‘Search’.Allsupportedmaterials,includingmanuals,QuickStartGuide(QSG),software
andfirmwarewillappearintheresults.
 Attention:ThisDocumentisintendedtoserveasaquickreferenceforinitialset-up.
 SeetheDWSpectrumfullmanualformoreinformationoffeaturesandfunctionality.

Quick Start Guide
SUPPLIEDITEMS
Pleaseunwraptheproduct,andplacetheproductonaflatplaceorintheplacetobeinstalled.
Makesurethatyouhavefollowingitemssupplied.Ifanyoftheseitemsaremissingordamaged,
notifyyourvendorimmediately.Keepthepackingutilitiesformovingorstoragepurposes.



NetworkCable1set


Frontdoorlockkey


PowerCable1set

HDDScrews(1bag)


RackMountKit1set

RackMountKitScrews
(1bag)
Rackscrewsnot
included









 
NOTE:DownloadAllYourSupportMaterialsandToolsinOnePlace
1.Goto:http://www.digital-watchdog.com/support-download/
2.Searchyouproductbyenteringthepartnumberinthe‘SearchbyProduct’searchbar.
Resultsforapplicablepartnum-berswillpopulateautomaticallybasedonthepartnumberyou
enter.
3.Click‘Search’.Allsupportedmaterials,includingmanuals,QuickStartGuide(QSG),software
andfirmwarewillappearintheresults.
 Attention:ThisDocumentisintendedtoserveasaquickreferenceforinitialset-up.
 SeetheDWSpectrumfullmanualformoreinformationoffeaturesandfunctionality.

Quick Start Guide
SUPPLIEDITEMS
Pleaseunwraptheproduct,andplacetheproductonaflatplaceorintheplacetobeinstalled.
Makesurethatyouhavefollowingitemssupplied.Ifanyoftheseitemsaremissingordamaged,
notifyyourvendorimmediately.Keepthepackingutilitiesformovingorstoragepurposes.



NetworkCable1set


Frontdoorlockkey


PowerCable1set

HDDScrews(1bag)


RackMountKit1set

RackMountKitScrews
(1bag)
Rackscrewsnot
included









 
NOTE:DownloadAllYourSupportMaterialsandToolsinOnePlace
1.Goto:http://www.digital-watchdog.com/support-download/
2.Searchyouproductbyenteringthepartnumberinthe‘SearchbyProduct’searchbar.
Resultsforapplicablepartnum-berswillpopulateautomaticallybasedonthepartnumberyou
enter.
3.Click‘Search’.Allsupportedmaterials,includingmanuals,QuickStartGuide(QSG),software
andfirmwarewillappearintheresults.
 Attention:ThisDocumentisintendedtoserveasaquickreferenceforinitialset-up.
 SeetheDWSpectrumfullmanualformoreinformationoffeaturesandfunctionality.

Quick Start Guide
SUPPLIEDITEMS
Pleaseunwraptheproduct,andplacetheproductonaflatplaceorintheplacetobeinstalled.
Makesurethatyouhavefollowingitemssupplied.Ifanyoftheseitemsaremissingordamaged,
notifyyourvendorimmediately.Keepthepackingutilitiesformovingorstoragepurposes.



NetworkCable1set


Frontdoorlockkey


PowerCable1set

HDDScrews(1bag)


RackMountKit1set

RackMountKitScrews
(1bag)
Rackscrewsnot
included









 
NOTE:DownloadAllYourSupportMaterialsandToolsinOnePlace
1.Goto:http://www.digital-watchdog.com/support-download/
2.Searchyouproductbyenteringthepartnumberinthe‘SearchbyProduct’searchbar.
Resultsforapplicablepartnum-berswillpopulateautomaticallybasedonthepartnumberyou
enter.
3.Click‘Search’.Allsupportedmaterials,includingmanuals,QuickStartGuide(QSG),software
andfirmwarewillappearintheresults.
 Attention:ThisDocumentisintendedtoserveasaquickreferenceforinitialset-up.
 SeetheDWSpectrumfullmanualformoreinformationoffeaturesandfunctionality.
Network Attached Storage
ÂŽ
NAS
2
NOTE: Download all your support materials and tools in one place.
1. Go to: http://www.digital-watchdog.com/support-download/
2. Search you product by entering the part number in the ‘Search by Product’ search bar. Results for applicable part
numbers will populate automatically based on the part number you enter.
3. Click ‘Search’. All supported materials, including manuals, quick start guide (QSG), software and rmware
will appear in the results.
Attention: This document is intended to serve as a quick reference for initial set-up.
See the DW Spectrum
ÂŽ
IPVMS full manual for more information of features and functionality.
HARDWARE

Quick Start Guide
HARDWARE 

Front-sideI








Front-sideII






 
1
2
3
1
2
3
ErrorLED
NetworkLED
Door-LockKey
5
4
6
4
5
6
FrontLCD
Button1
Button2
3
4
1
2
1
2
3
MuteLED
Muteswitch
PowerLED
4
PowerButton

Quick Start Guide

HARDWARE 

Front-sideI








Front-sideII






1
2
3
1
2
3
ErrorLED
NetworkLED
Door-LockKey
5
4
6
4
5
6
FrontLCD
Button1
Button2
3
4
1
2
1
2
3
MuteLED
Muteswitch
PowerLED
4
PowerButton
Front-side I
Error LED
Network LED
Door-lock key
Front LCD
Button 1
Button 2

Quick Start Guide
HARDWARE 

Front-sideI








Front-sideII






 
1
2
3
1
2
3
ErrorLED
NetworkLED
Door-LockKey
5
4
6
4
5
6
FrontLCD
Button1
Button2
3
4
1
2
1
2
3
MuteLED
Muteswitch
PowerLED
4
PowerButton

Quick Start Guide

HARDWARE 

Front-sideI








Front-sideII






1
2
3
1
2
3
ErrorLED
NetworkLED
Door-LockKey
5
4
6
4
5
6
FrontLCD
Button1
Button2
3
4
1
2
1
2
3
MuteLED
Muteswitch
PowerLED
4
PowerButton
Mute LED
Mute switch
Power LED
Power button
Front-side II

Quick Start Guide

HARDWARE 

Front-sideI








Front-sideII






1
2
3
1
2
3
ErrorLED
NetworkLED
Door-LockKey
5
4
6
4
5
6
FrontLCD
Button1
Button2
3
4
1
2
1
2
3
MuteLED
Muteswitch
PowerLED
4
PowerButton

Quick Start Guide

HARDWARE 

Front-sideI








Front-sideII






1
2
3
1
2
3
ErrorLED
NetworkLED
Door-LockKey
5
4
6
4
5
6
FrontLCD
Button1
Button2
3
4
1
2
1
2
3
MuteLED
Muteswitch
PowerLED
4
PowerButton

Quick Start Guide

HARDWARE 

Front-sideI








Front-sideII






1
2
3
1
2
3
ErrorLED
NetworkLED
Door-LockKey
5
4
6
4
5
6
FrontLCD
Button1
Button2
3
4
1
2
1
2
3
MuteLED
Muteswitch
PowerLED
4
PowerButton

Quick Start Guide

HARDWARE 

Front-sideI








Front-sideII






1
2
3
1
2
3
ErrorLED
NetworkLED
Door-LockKey
5
4
6
4
5
6
FrontLCD
Button1
Button2
3
4
1
2
1
2
3
MuteLED
Muteswitch
PowerLED
4
PowerButton
Network Attached Storage
ÂŽ
NAS
3
Network port
LAN1 ~LAN4 from left

Quick Start Guide

Rear-side










SETTINGUPTHEBLACKJACKNASRACK
 
2
4
1
2
3
Powersupply
USBport
Consoleport
4
Networkport
LAN1~LAN4fromleft
3
1
Connecttopowersource.
Recommendtoconnect
directlytoUPS
Connectingto
BlackJackServer
ConnecttoLAN1ontheNAS
Power supply
USB port
Console port
Rear-side
SETTING UP THE BLACKJACK
ÂŽ
NAS RACK
Connect to power source.
Recommend to connect
directly to UPS
Connecting to
Blackjack
ÂŽ
server

Quick Start Guide

Rear-side










SETTINGUPTHEBLACKJACKNASRACK
 
2
4
1
2
3
Powersupply
USBport
Consoleport
4
Networkport
LAN1~LAN4fromleft
3
1
Connecttopowersource.
Recommendtoconnect
directlytoUPS
Connectingto
BlackJackServer
ConnecttoLAN1ontheNAS
16Gps switch
Connect to LAN1 on the NAS
STEP 1: Connecting the network cable
1. Locate the network switch where the DW Spectrum
ÂŽ
IPVMS server is connected to.
(Blackjack
ÂŽ
NAS RACK must be on the same network as the DW Spectrum
ÂŽ
IPVMS server
where it will be added to)
2. Connect the network cable to the network port 1 and to the network switch.
NOTE It is required to use Gigabit switch
Network Attached Storage
ÂŽ
NAS
4
STEP 2: Turn on the System
1. Connect the power cable of the device to the power source.
2. Press the power button for 3 seconds on the front panel.
- The booting status can be viewed from front LCD.
- Booting is complete and ready to use when LCD displays.
STEP 3: Congure network (for Windows)
RAID GROUP1
RAID5 OK
1. From the Windows based Blackjack
ÂŽ
server or any Windows PC, open DW IP Finder
™
by double click on the DW IP
Finder
™
icon on the Desktop or click on DW IP Finder
™
from Start Menu > All Programs > DW IP Finder
™
.
* Must be on the same subnet as Spectrum server
2. If the DW IP Finder
™
is not installed or not the latest version, download and install from
http://digital-watchdog.com/support.
- Under Software, select DW IP Finder
™
from the drop down list.
- Then go to Downloads section and expand Software/Firmware.
- Click on the download icon to download the DW IP Finder
™
.
- Then install the DW IP Finder
™
by following the installation wizard.
* Requires DW IP Finder
™
4.3.17 or later version

Quick Start Guide
STEP1:Connectingthenetworkcable
1. LocatethenetworkswitchwheretheSpectrumserverisconnectedto.
(BlackJackNASRACKmustbeonthesamenetworkastheSpectrumserverwhereitwillbe
addedto)
2. Connectthenetworkcabletothenetworkport1andtothenetworkswitch.

STEP2:TurnontheSystem
1. Connectthepowercableofthedevicetothepowersource.

2. Pressthepowerbuttonfor3secondsonthefrontpanel.
-ThebootingstatuscanbeviewedfromfrontLCD.
-BootingiscompleteandreadytousewhenLCDdisplays


STEP3:ConfigureNetwork(forWindows)

1. FromtheWindowsbasedBlackjackserveroranyWindowsPC,openDWIPFinderbydouble
clickontheDWIPFindericonontheDesktoporclickonDWIPFinderfromStartMenu>
AllPrograms>DWIPFinder.
*MustbeonthesamesubnetasSpectrumserver

2. IftheDWIPFinderisnotinstalledornotthelatestversion,downloadandinstallfrom
http://digital-watchdog.com/support.
- UnderSoftware,selectDWIPFinderfromthedropdownlist.
- ThengotoDownloadssectionandexpandSoftware/Firmware.
NOTEItisrequiredtouseGigabitswitch
RAIDGROUP1
RAID5OK

Quick Start Guide
STEP1:Connectingthenetworkcable
1. LocatethenetworkswitchwheretheSpectrumserverisconnectedto.
(BlackJackNASRACKmustbeonthesamenetworkastheSpectrumserverwhereitwillbe
addedto)
2. Connectthenetworkcabletothenetworkport1andtothenetworkswitch.

STEP2:TurnontheSystem
1. Connectthepowercableofthedevicetothepowersource.

2. Pressthepowerbuttonfor3secondsonthefrontpanel.
-ThebootingstatuscanbeviewedfromfrontLCD.
-BootingiscompleteandreadytousewhenLCDdisplays


STEP3:ConfigureNetwork(forWindows)

1. FromtheWindowsbasedBlackjackserveroranyWindowsPC,openDWIPFinderbydouble
clickontheDWIPFindericonontheDesktoporclickonDWIPFinderfromStartMenu>
AllPrograms>DWIPFinder.
*MustbeonthesamesubnetasSpectrumserver

2. IftheDWIPFinderisnotinstalledornotthelatestversion,downloadandinstallfrom
http://digital-watchdog.com/support.
- UnderSoftware,selectDWIPFinderfromthedropdownlist.
- ThengotoDownloadssectionandexpandSoftware/Firmware.
NOTEItisrequiredtouseGigabitswitch
RAIDGROUP1
RAID5OK
Search for Devices
Filter Search Results
Device’s
Network Settings
Select which
Network to Scan
Show/Hide Thumbnail View
Devices Firmware Version
Camera’s Live
Thumbnail View
Device Name,
Model, IP Address,
and MAC Address
Firmware Upgrade
Network Attached Storage
ÂŽ
NAS
5
6. From the device setting dialog window, enter IP Address, Netmask and Gateway then click Apply to save changes
then close the Dialog.
*Consult with your IT or network administrator If you do not have IP information.

Quick Start Guide
- ClickonthedownloadicontodownloadtheDWIPFinder.
- TheninstalltheDWIPFinderbyfollowingtheinstallationwizard.
*RequiresDWIPFinder4.3.17orlaterversion

3. WhentheDWIPFinderisopened,itwillscanandlistalltheDWCamerasandBlackjackNAS
RACKthatareontheselectednetwork.

4. IftheBlackjackNASRACKisnotlisted,changetheNetwork*byclickingthedropdownand
selectanothernetworkifexist.ThenclicktoscanthenetworkfortheBlackjack
NASRACK.
- Ifit’sshowingincorrectnetwork,selectthecorrectnetworkfromthedropdownlist.


5. FindtheBlackjackNASRACKfromthelist,theneitherdoubleclickonthe 
orclickontheundertheIPConfcolumn.



6. Fromthedevicesettingdialogwindow,enterIPAddress,NetmaskandGatewaythenclickApply
tosavechangesthenclosetheDialog.
. 

*ConsultwithyourITornetworkadministratorIfyoudonothaveIPinformation,

Quick Start Guide
- ClickonthedownloadicontodownloadtheDWIPFinder.
- TheninstalltheDWIPFinderbyfollowingtheinstallationwizard.
*RequiresDWIPFinder4.3.17orlaterversion

3. WhentheDWIPFinderisopened,itwillscanandlistalltheDWCamerasandBlackjackNAS
RACKthatareontheselectednetwork.

4. IftheBlackjackNASRACKisnotlisted,changetheNetwork*byclickingthedropdownand
selectanothernetworkifexist.ThenclicktoscanthenetworkfortheBlackjack
NASRACK.
- Ifit’sshowingincorrectnetwork,selectthecorrectnetworkfromthedropdownlist.


5. FindtheBlackjackNASRACKfromthelist,theneitherdoubleclickonthe 
orclickontheundertheIPConfcolumn.



6. Fromthedevicesettingdialogwindow,enterIPAddress,NetmaskandGatewaythenclickApply
tosavechangesthenclosetheDialog.
. 

*ConsultwithyourITornetworkadministratorIfyoudonothaveIPinformation,
NOTE: Default IP info
IP Ad d re s s: 192.16 8 .1. 2 0 0
Subnetmask: 255.255.255.0
Ga tew ay: 192.168.1.1
For Windows
1. Once the new IP have been applied, click on Find Devices to update the changes.
2. Find the Blackjack
ÂŽ
NAS RACK from the list, then either double click on the
or click on the under the IP Conf column.
3. Open the Device Settings dialog to add storage to the Windows and to DW Spectrum
ÂŽ
IPVMS media server.
ADD STORAGE TO DW SPECTRUM
ÂŽ
IPVMS MEDIA SERVER

Quick Start Guide
ADDSTORAGETODWSPECTRUMMEDIASERVER
ForWindows
1. OncethenewIPhavebeenapplied,clickonFindDevicestoupdatethechanges.
2. FindtheBlackjackNASRACKfromthelist,theneitherdoubleclickonthe 
orclickontheundertheIPConfcolumn.

3. OpentheDeviceSettingsdialogtoaddstoragetotheWindowsandtoDWSpectrumMedia
Server.


4. Clickonthe

5. ScriptwillruntoaddtheNASstoragevolumestotheWindows.Uponsuccessfulexecutionof
thescript,thefollowingresultwillbedisplayed.



6. Uponsuccessfulcompletionoftheinstallation,“Success”forbothDISK1andDISK2,clickonthe
blackspacethenpressanykeyonthekeyboardtoclosetheWindow.
7. ClosetheWindowsofthenewvolumescreatedbythescript
NOTEDefaultIPinfo
 IPAddress:192.168.1.200
 Subnetmask:255.255.255.0
 Gateway:192.168.1.1

Quick Start Guide
ADDSTORAGETODWSPECTRUMMEDIASERVER
ForWindows
1. OncethenewIPhavebeenapplied,clickonFindDevicestoupdatethechanges.
2. FindtheBlackjackNASRACKfromthelist,theneitherdoubleclickonthe 
orclickontheundertheIPConfcolumn.

3. OpentheDeviceSettingsdialogtoaddstoragetotheWindowsandtoDWSpectrumMedia
Server.


4. Clickonthe

5. ScriptwillruntoaddtheNASstoragevolumestotheWindows.Uponsuccessfulexecutionof
thescript,thefollowingresultwillbedisplayed.



6. Uponsuccessfulcompletionoftheinstallation,“Success”forbothDISK1andDISK2,clickonthe
blackspacethenpressanykeyonthekeyboardtoclosetheWindow.
7. ClosetheWindowsofthenewvolumescreatedbythescript
NOTEDefaultIPinfo
 IPAddress:192.168.1.200
 Subnetmask:255.255.255.0
 Gateway:192.168.1.1
3. When the DW IP Finder
™
is opened, it will scan and list all the DW cameras and Blackjack
ÂŽ
NAS RACK that
are on the selected network.
4. If the Blackjack
ÂŽ
NAS RACK is not listed, change the network* by clicking the drop down and select another
network if exist. Then click to scan the network for the Blackjack
ÂŽ
NAS RACK.
- If it’s showing incorrect network, select the correct network from the drop down list.
5. Find the Blackjack
ÂŽ
NAS RACK from the list, then either double click on the
or click under the IP Conf column.

Quick Start Guide
- ClickonthedownloadicontodownloadtheDWIPFinder.
- TheninstalltheDWIPFinderbyfollowingtheinstallationwizard.
*RequiresDWIPFinder4.3.17orlaterversion

3. WhentheDWIPFinderisopened,itwillscanandlistalltheDWCamerasandBlackjackNAS
RACKthatareontheselectednetwork.

4. IftheBlackjackNASRACKisnotlisted,changetheNetwork*byclickingthedropdownand
selectanothernetworkifexist.ThenclicktoscanthenetworkfortheBlackjack
NASRACK.
- Ifit’sshowingincorrectnetwork,selectthecorrectnetworkfromthedropdownlist.


5. FindtheBlackjackNASRACKfromthelist,theneitherdoubleclickonthe 
orclickontheundertheIPConfcolumn.



6. Fromthedevicesettingdialogwindow,enterIPAddress,NetmaskandGatewaythenclickApply
tosavechangesthenclosetheDialog.
. 

*ConsultwithyourITornetworkadministratorIfyoudonothaveIPinformation,

Quick Start Guide
- ClickonthedownloadicontodownloadtheDWIPFinder.
- TheninstalltheDWIPFinderbyfollowingtheinstallationwizard.
*RequiresDWIPFinder4.3.17orlaterversion

3. WhentheDWIPFinderisopened,itwillscanandlistalltheDWCamerasandBlackjackNAS
RACKthatareontheselectednetwork.

4. IftheBlackjackNASRACKisnotlisted,changetheNetwork*byclickingthedropdownand
selectanothernetworkifexist.ThenclicktoscanthenetworkfortheBlackjack
NASRACK.
- Ifit’sshowingincorrectnetwork,selectthecorrectnetworkfromthedropdownlist.


5. FindtheBlackjackNASRACKfromthelist,theneitherdoubleclickonthe 
orclickontheundertheIPConfcolumn.



6. Fromthedevicesettingdialogwindow,enterIPAddress,NetmaskandGatewaythenclickApply
tosavechangesthenclosetheDialog.
. 

*ConsultwithyourITornetworkadministratorIfyoudonothaveIPinformation,

Quick Start Guide
- ClickonthedownloadicontodownloadtheDWIPFinder.
- TheninstalltheDWIPFinderbyfollowingtheinstallationwizard.
*RequiresDWIPFinder4.3.17orlaterversion

3. WhentheDWIPFinderisopened,itwillscanandlistalltheDWCamerasandBlackjackNAS
RACKthatareontheselectednetwork.

4. IftheBlackjackNASRACKisnotlisted,changetheNetwork*byclickingthedropdownand
selectanothernetworkifexist.ThenclicktoscanthenetworkfortheBlackjack
NASRACK.
- Ifit’sshowingincorrectnetwork,selectthecorrectnetworkfromthedropdownlist.


5. FindtheBlackjackNASRACKfromthelist,theneitherdoubleclickonthe 
orclickontheundertheIPConfcolumn.



6. Fromthedevicesettingdialogwindow,enterIPAddress,NetmaskandGatewaythenclickApply
tosavechangesthenclosetheDialog.
. 

*ConsultwithyourITornetworkadministratorIfyoudonothaveIPinformation,

Quick Start Guide
- ClickonthedownloadicontodownloadtheDWIPFinder.
- TheninstalltheDWIPFinderbyfollowingtheinstallationwizard.
*RequiresDWIPFinder4.3.17orlaterversion

3. WhentheDWIPFinderisopened,itwillscanandlistalltheDWCamerasandBlackjackNAS
RACKthatareontheselectednetwork.

4. IftheBlackjackNASRACKisnotlisted,changetheNetwork*byclickingthedropdownand
selectanothernetworkifexist.ThenclicktoscanthenetworkfortheBlackjack
NASRACK.
- Ifit’sshowingincorrectnetwork,selectthecorrectnetworkfromthedropdownlist.


5. FindtheBlackjackNASRACKfromthelist,theneitherdoubleclickonthe 
orclickontheundertheIPConfcolumn.



6. Fromthedevicesettingdialogwindow,enterIPAddress,NetmaskandGatewaythenclickApply
tosavechangesthenclosetheDialog.
. 

*ConsultwithyourITornetworkadministratorIfyoudonothaveIPinformation,
Network Attached Storage
ÂŽ
NAS
6
4. Click on the
5. Script will run to add the NAS storage volumes to the Windows. Upon successful execution of the script,
the following result will be displayed.
6. Upon successful completion of the installation, “Success” for both DISK1 and DISK2, click on
the black space then press any key on the keyboard to close the Window.
7. Close the Windows of the new volumes created by the script.

Quick Start Guide
ADDSTORAGETODWSPECTRUMMEDIASERVER
ForWindows
1. OncethenewIPhavebeenapplied,clickonFindDevicestoupdatethechanges.
2. FindtheBlackjackNASRACKfromthelist,theneitherdoubleclickonthe 
orclickontheundertheIPConfcolumn.

3. OpentheDeviceSettingsdialogtoaddstoragetotheWindowsandtoDWSpectrumMedia
Server.


4. Clickonthe

5. ScriptwillruntoaddtheNASstoragevolumestotheWindows.Uponsuccessfulexecutionof
thescript,thefollowingresultwillbedisplayed.



6. Uponsuccessfulcompletionoftheinstallation,“Success”forbothDISK1andDISK2,clickonthe
blackspacethenpressanykeyonthekeyboardtoclosetheWindow.
7. ClosetheWindowsofthenewvolumescreatedbythescript
NOTEDefaultIPinfo
 IPAddress:192.168.1.200
 Subnetmask:255.255.255.0
 Gateway:192.168.1.1

Quick Start Guide
ADDSTORAGETODWSPECTRUMMEDIASERVER
ForWindows
1. OncethenewIPhavebeenapplied,clickonFindDevicestoupdatethechanges.
2. FindtheBlackjackNASRACKfromthelist,theneitherdoubleclickonthe 
orclickontheundertheIPConfcolumn.

3. OpentheDeviceSettingsdialogtoaddstoragetotheWindowsandtoDWSpectrumMedia
Server.


4. Clickonthe

5. ScriptwillruntoaddtheNASstoragevolumestotheWindows.Uponsuccessfulexecutionof
thescript,thefollowingresultwillbedisplayed.



6. Uponsuccessfulcompletionoftheinstallation,“Success”forbothDISK1andDISK2,clickonthe
blackspacethenpressanykeyonthekeyboardtoclosetheWindow.
7. ClosetheWindowsofthenewvolumescreatedbythescript
NOTEDefaultIPinfo
 IPAddress:192.168.1.200
 Subnetmask:255.255.255.0
 Gateway:192.168.1.1

Quick Start Guide
ADDSTORAGETODWSPECTRUMMEDIASERVER
ForWindows
1. OncethenewIPhavebeenapplied,clickonFindDevicestoupdatethechanges.
2. FindtheBlackjackNASRACKfromthelist,theneitherdoubleclickonthe 
orclickontheundertheIPConfcolumn.

3. OpentheDeviceSettingsdialogtoaddstoragetotheWindowsandtoDWSpectrumMedia
Server.


4. Clickonthe

5. ScriptwillruntoaddtheNASstoragevolumestotheWindows.Uponsuccessfulexecutionof
thescript,thefollowingresultwillbedisplayed.



6. Uponsuccessfulcompletionoftheinstallation,“Success”forbothDISK1andDISK2,clickonthe
blackspacethenpressanykeyonthekeyboardtoclosetheWindow.
7. ClosetheWindowsofthenewvolumescreatedbythescript
NOTEDefaultIPinfo
 IPAddress:192.168.1.200
 Subnetmask:255.255.255.0
 Gateway:192.168.1.1
8. Close the Device Setting dialog box and minimize the DW IP Finder
™
.
9. Open DW Spectrum
ÂŽ
IPVMS Client by double click the DW Spectrum
ÂŽ
IPVMS icon
On the Desktop or click on DW Spectrum
ÂŽ
IPVMS from Start > All Program > Digital Watchdog
10. Login to the DW Spectrum
ÂŽ
IPVMS server where the Blackjack
ÂŽ
NAS RACK is connected to.
11. Right click on the server name listed on the Resources then click Server Settings.

Quick Start Guide
8. ClostheDeviceSettingdialogboxandminimizetheDWIPFinder.

9. OpenDWSpectrumClientbydoubleclicktheDWSpectrumicon
OntheDesktoporclickonDWSpectrumfromStart>AllProgram>DigitalWatchdog

10. LogintotheDWSpectrumserverwheretheBlackjackNASRACKisconnectedto.



11. RightclickontheservernamelistedontheResourcesthenclickServerSettings.



12. FromtheStorageManagementtab,enabletherecordingstothenewlycreatedvolumesonthe
BlackjackNASRACKbyclicking 

Itwillshowgreenwhenenabled
*ifyouhavelocaldriveturnedonforrecording,pleasecontactTechSupportforoptions.

13. SelectstoragetypeaseitherMainorBackup.(RefertotheDWSpectrummanualfordetail
informationofthestoragetype)

Quick Start Guide
8. ClostheDeviceSettingdialogboxandminimizetheDWIPFinder.

9. OpenDWSpectrumClientbydoubleclicktheDWSpectrumicon
OntheDesktoporclickonDWSpectrumfromStart>AllProgram>DigitalWatchdog

10. LogintotheDWSpectrumserverwheretheBlackjackNASRACKisconnectedto.



11. RightclickontheservernamelistedontheResourcesthenclickServerSettings.



12. FromtheStorageManagementtab,enabletherecordingstothenewlycreatedvolumesonthe
BlackjackNASRACKbyclicking 

Itwillshowgreenwhenenabled
*ifyouhavelocaldriveturnedonforrecording,pleasecontactTechSupportforoptions.

13. SelectstoragetypeaseitherMainorBackup.(RefertotheDWSpectrummanualfordetail
informationofthestoragetype)
Network Attached Storage
ÂŽ
NAS
7
12. From the Storage Management tab, enable the recordings to the newly created volumes on the
Blackjack
ÂŽ
NAS RACK by clicking
It will show green when enabled
* if you have local drive turned on for recording, please contact Tech Support for options.
13. Select storage type as either Main or Backup. (Refer to the DW Spectrum
ÂŽ
IPVMS manual for
detail information of the storage type).

Quick Start Guide
8. ClostheDeviceSettingdialogboxandminimizetheDWIPFinder.

9. OpenDWSpectrumClientbydoubleclicktheDWSpectrumicon
OntheDesktoporclickonDWSpectrumfromStart>AllProgram>DigitalWatchdog

10. LogintotheDWSpectrumserverwheretheBlackjackNASRACKisconnectedto.



11. RightclickontheservernamelistedontheResourcesthenclickServerSettings.



12. FromtheStorageManagementtab,enabletherecordingstothenewlycreatedvolumesonthe
BlackjackNASRACKbyclicking 

Itwillshowgreenwhenenabled
*ifyouhavelocaldriveturnedonforrecording,pleasecontactTechSupportforoptions.

13. SelectstoragetypeaseitherMainorBackup.(RefertotheDWSpectrummanualfordetail
informationofthestoragetype)

Quick Start Guide
8. ClostheDeviceSettingdialogboxandminimizetheDWIPFinder.

9. OpenDWSpectrumClientbydoubleclicktheDWSpectrumicon
OntheDesktoporclickonDWSpectrumfromStart>AllProgram>DigitalWatchdog

10. LogintotheDWSpectrumserverwheretheBlackjackNASRACKisconnectedto.



11. RightclickontheservernamelistedontheResourcesthenclickServerSettings.



12. FromtheStorageManagementtab,enabletherecordingstothenewlycreatedvolumesonthe
BlackjackNASRACKbyclicking 

Itwillshowgreenwhenenabled
*ifyouhavelocaldriveturnedonforrecording,pleasecontactTechSupportforoptions.

13. SelectstoragetypeaseitherMainorBackup.(RefertotheDWSpectrummanualfordetail
informationofthestoragetype)

Quick Start Guide
8. ClostheDeviceSettingdialogboxandminimizetheDWIPFinder.

9. OpenDWSpectrumClientbydoubleclicktheDWSpectrumicon
OntheDesktoporclickonDWSpectrumfromStart>AllProgram>DigitalWatchdog

10. LogintotheDWSpectrumserverwheretheBlackjackNASRACKisconnectedto.



11. RightclickontheservernamelistedontheResourcesthenclickServerSettings.



12. FromtheStorageManagementtab,enabletherecordingstothenewlycreatedvolumesonthe
BlackjackNASRACKbyclicking 

Itwillshowgreenwhenenabled
*ifyouhavelocaldriveturnedonforrecording,pleasecontactTechSupportforoptions.

13. SelectstoragetypeaseitherMainorBackup.(RefertotheDWSpectrummanualfordetail
informationofthestoragetype)
ADJUST DW SPECTRUM
ÂŽ
IPVMS RESERVE SPACE FOR
BLACKJACK
ÂŽ
NAS RACK
1. Restore the DW IP Finder
™
and open the Device Settings to adjust DW Spectrum
ÂŽ
IPVMS reserve
space for Blackjack
ÂŽ
NAS RACK. (NAS should have 100GB reserve space per volumes).
14. Click Apply or OK to save the changes.

Quick Start Guide


14. ClickApplyorOKtosavethechanges.


ADJUSTSPECTRUMRESERVESPACEFORBlackjackNASRACK

1. RestoretheDWIPFinderandopentheDeviceSettingstoadjustSpectrumreservespacefor
BlackjackNASRACK.(NASshouldhave100GBreservespacepervolumes)






2. InputtheSpectrum’sadminpasswordintheSpectrumPW

3. Click


Quick Start Guide


14. ClickApplyorOKtosavethechanges.


ADJUSTSPECTRUMRESERVESPACEFORBlackjackNASRACK

1. RestoretheDWIPFinderandopentheDeviceSettingstoadjustSpectrumreservespacefor
BlackjackNASRACK.(NASshouldhave100GBreservespacepervolumes)






2. InputtheSpectrum’sadminpasswordintheSpectrumPW

3. Click

Network Attached Storage
ÂŽ
NAS
8
2. Input the DW Spectrum’s admin password in the DW Spectrum
ÂŽ
IPVMS PW
3. Click

Quick Start Guide


14. ClickApplyorOKtosavethechanges.


ADJUSTSPECTRUMRESERVESPACEFORBlackjackNASRACK

1. RestoretheDWIPFinderandopentheDeviceSettingstoadjustSpectrumreservespacefor
BlackjackNASRACK.(NASshouldhave100GBreservespacepervolumes)






2. InputtheSpectrum’sadminpasswordintheSpectrumPW

3. Click


Quick Start Guide


14. ClickApplyorOKtosavethechanges.


ADJUSTSPECTRUMRESERVESPACEFORBlackjackNASRACK

1. RestoretheDWIPFinderandopentheDeviceSettingstoadjustSpectrumreservespacefor
BlackjackNASRACK.(NASshouldhave100GBreservespacepervolumes)






2. InputtheSpectrum’sadminpasswordintheSpectrumPW

3. Click

4. If the connected Blackjack
ÂŽ
NAS RACK has set 100G space limit successfully, you can see the
message
5. Then click on the
* You can check the reserved space size from
http://localhost:7001/static/index.html#/advanced
6. You can close the DW IP Finder
™
if not needed.

Quick Start Guide
4. IftheconnectedBlackjackNASRACKhasset100Gspacelimitsuccessfully,youcanseethe
message 
5. Thenclickonthe 
*YoucanchecktheReservedSpacesizefrom
http://localhost:7001/static/index.html#/advanced

6. YoucanclosetheDWIPfinderifnotneeded.




REQUIREMENTS

1.Network:1GbpsNetwork
2.DWSpectrumServer:DWSpectrum2.6orlater
3.DWIPFinder4.3.17orhigher
4.UPSsystemwith750VAorhigher(foronlyconnectingDW-BJ8NASRxT)
5.Windows7orlaterOS



Quick Start Guide
4. IftheconnectedBlackjackNASRACKhasset100Gspacelimitsuccessfully,youcanseethe
message 
5. Thenclickonthe 
*YoucanchecktheReservedSpacesizefrom
http://localhost:7001/static/index.html#/advanced

6. YoucanclosetheDWIPfinderifnotneeded.




REQUIREMENTS

1.Network:1GbpsNetwork
2.DWSpectrumServer:DWSpectrum2.6orlater
3.DWIPFinder4.3.17orhigher
4.UPSsystemwith750VAorhigher(foronlyconnectingDW-BJ8NASRxT)
5.Windows7orlaterOS



Quick Start Guide
4. IftheconnectedBlackjackNASRACKhasset100Gspacelimitsuccessfully,youcanseethe
message 
5. Thenclickonthe 
*YoucanchecktheReservedSpacesizefrom
http://localhost:7001/static/index.html#/advanced

6. YoucanclosetheDWIPfinderifnotneeded.




REQUIREMENTS

1.Network:1GbpsNetwork
2.DWSpectrumServer:DWSpectrum2.6orlater
3.DWIPFinder4.3.17orhigher
4.UPSsystemwith750VAorhigher(foronlyconnectingDW-BJ8NASRxT)
5.Windows7orlaterOS


www.digital-watchdog.com
sales@dwcc.tv
Rev Date: 05/18
Copyright Š Digital Watchdog. All rights reserved.
Specications and pricing are subject to change without notice.
Tel: +1 (866) 446-3595
Fax: (813) 888-9262
1. Network : 1Gbps network.
2. DW Spectrum
ÂŽ
IPVMS Server : DW Spectrum
ÂŽ
IPVMS 2.6 or later
3. DW IP Finder
™
4.3.17 or higher
4. UPS system with 750VA or higher (for only connecting DW-BJ8NASRxT)
5. Windows
ÂŽ
7 or later OS.
REQUIREMENTS
/