Monitor Audio AirStream A100 User manual

Brand: Monitor Audio

Model: AirStream A100

Category: Digital audio streamers

Type: User manual

This manual is also suitable for

User Manual

Audio Ampliﬁer

Contents

Thank You for your Purchase.

Congratulations on purchasing Monitor Audio’s Airstream A100. Welcome to the new way to “Free Your Music” anywhere in your home

wirelessly from an AirPlay compatible device or iTunes on your PC or Mac.

Register your product now!!!! For extra piece of mind, news and the opportunity to win products from Monitor Audio, don’t forget to

The Airstream A100 is the latest high quality product from Monitor Audio that will provide many years of musical enjoyment.

FOR FURTHER INFORMATION ON MONITOR AUDIO PLEASE GO TO WWW.MONITORAUDIO.COM

Contents 1

Thank You for your Purchase. 1

Introduction  2

A100 Capabilities 2

What’s in the box? 2

AirPlay Compatibility 2

USB Compatibility 2

The A100 3

Remote 3

Getting Ready to Free Your Music 4

Connecting the Speakers 4

Connecting the Power 4

Airstream Direct 5

Freeing Your Music 6

Connecting to a WiFi Network. 6

What is required? 6

Option 1. 6

Option 2. 7

Via iOS-Device 7

Via Laptop/ PC 9

FREE YOUR MUSIC 11

Use Airplay from your iOS-device 11

Using AirPlay from iTunes 11

Play Another Device Using the Analogue Inputs 12

Play Another Device Using the Digital Inputs 13

Play Another Device Via DLNA 13

Charging via the USB 14

Firmware Update. 14

AutomaticNoticationofFirmwareUpdate 14

USB Firmware Update 15

Web Browser Firmware Update 15

Checking Firmware Version 17

Ready Mode 17

What is Ready Mode? 17

How to Enter Ready Mode 17

Factory Reset 18

Changing the Remote Battery 18

LED Colour Matrix 19

LED Flashing Patterns 19

Specs 20

Trouble Shooting 21

Unable to Connect to the Wireless Network 21

No Sound 21

The A100 is Nonresponsive 21

Occasional Breaking up of AirPlay Music Playback 21

No AirPlay Icon on my iTunes Host Device 21

AirPlay Connection Failed with Mac or PC 21

Owner Information 21

Introduction

With the introduction of iOS 4.3 from Apple came AirPlay. Monitor

Audio have used 40 years of knowledge to produce a TRUE hi,

AirPlay enabled amplier system. Whether using Airstream Direct,

streaming via a wireless router or playing your music collection

from PC or MAC, the A100 is the way to “Free Your Music”.

A100 Capabilities

• Stream audio from an iOS-device using Airstream direct

without the need of a wireless router.

• Stream audio from an iOS-device via WiFi to the A100

connected to the same network.

• Choose which AirPlay device you want to stream to from your

iOS-device when there are multiple Airstream devices on your

network.

• Stream audio by WiFi from any PC or Mac using iTunes (version

10 or later) connected to the same wireless network as the

A100.

• Stream audio from any PC or Mac to multiple Airstream

devices using iTunes, again by WiFi and with the A100 on the

same wireless network.

What’s in the box?

• A100

• Remote Control

• Mains lead (region specic).

• Quick Start Guide

• Safety Instructions

AirPlay Compatibility

To stream wirelessly to the A100 using AirPlay (not Airstream

Direct), you will need the following:

• A WiFi certied router (Wireless 802.11 b/g class only)

• A host for your music (iPhone/ iPad/ iPod Touch running iOS

4.3 or later, or a PC/ Mac with iTunes 10 or later)

Compatible AirPlay devices are listed below:

• iPad Mini

• iPad 4

• iPad 3

• iPad 2

• iPad

• iPhone 5

• iPhone 4S

• iPhone 4

• iPhone 3GS

• iPod Touch 5th Generation

• iPod Touch 4th Generation

• iPod Touch 3rd Generation

• iPod Touch 2nd Generation

USB Compatibility

Below is a list of devices that will play music back via the USB.

Each will charge while connected to the A100 (when not in standby

mode).

• iPhone 5

• iPhone 4S

• iPhone 4

• iPhone 3GS

• iPhone 3G

• iPod Touch 5th Generation

• iPod Touch 4th Generation

• iPod Touch 3rd Generation

• iPod Touch 2nd Generation

• iPod Touch

• iPod Classic

• iPod Nano 7th Generation

• iPod Nano 6th Generation

• iPod Nano 5th Generation

• iPod Nano 4th Generation

• iPod Nano 3rd Generation

• iPod Nano 2nd Generation

• iPod Nano

Remote

1. Standby. Either puts the A100 into standby or wakes it

from standby. When woken from standby it will start in the

previously selected input. Ready Mode cannot be activated

by the remote.

2. Volume up. Increases the volume level of playback.

3. Previous track. Selects either the start of the current track

or the previous track (short press) or scans back through the

current track (long press).

4. Volume down. Decreases the volume level of playback

5. Input toggle. Scrolls through the available inputs.

6. Next track. Selects the next track to be played (short press)

or scans forward through the current track (long press).

7. Play/ pause. Pauses and restarts playback of the current track.

The A100

1. Right speaker output. Connect the right hand speaker to

these terminals. Push the terminal in to reveal a through hole

to clamp the cable in place. Refer to page 4

2. Airstream Connect/ Airstream direct button. This button

serves two purposes: A short press puts the A100 into

Airstream Direct mode. Refer page 5; holding down for 12

seconds enables Airstream Connect mode for connecting the

A100 to the network. Refer page 7.

3. Wi-Fi Sharing/ Factory Reset button. This button also serves

two purposes: A short press is required when connecting

the A100 to a wireless network (an iOS device needs to be

connected via USB), refer to page 6; Press and hold for 12

seconds to perform a factory reset. Refer to page 18.

4. Digital optical auxillary input. Used for connecting another

device using a standard digital, optical lead (not supplied).

5. Mains power input. Connect the supplied mains lead here.

6. Analogue auxiliary input. Used for connecting another

device using a standard analogue, RCA lead (not supplied).

7. Analogue pre amp output. Used for connecting the A100 to

an external power amplier or a sub woofer.

8. Left speaker output. Connect the left hand speaker to these

terminals. Push the terminal in to reveal a through hole to

clamp the cable in place. Refer to page 4

9. Volume down. Decreases the volume level of playback.

10. Volume up. Increases the volume level of playback.

11. AirPlay/ DLNA source select.

12. Digital/ USB source select.

13. Analogue source select. .

14. Infra red receiver

15. USB connector. Used for charging, USB playback (iOS devices

only), wireless set up and updates.

16. Standby. Either puts the A100 into standby or wakes it

from standby. When woken from standby it will start in the

previously selected input. When held down, the A100 enters

Ready Mode. Refer to page 17.

17. Information LED. Refer to page 17 for the key and

explanations of the various colours and ashing patterns.

Title: i-Deck Remote Control Artwork

Date: 15th February 2010

Notes:

1. ICONS TO BE SILKSCREENED

PANTONE REFERENCE COOL GREY 1M

2. LOGO & TEXT TO BE PRINTED AS BLACK UV SPOT

3. IMAGE FOR REFERENCE PURPOSES ONLY.

4. VERSION 2

9 10 11 12 13 14 15 16

1 2 3 4 5 6 7 8

Getting Ready to Free Your Music

Connecting the Speakers

To connect the speakers/ cables, ensure that the cables are long

enough to rech the desired locations of the A100 and the position

of the speakers.

If using 4mm banana plugs simply insert them into the terminals

on the back of the A100.

If using bare wire, press the sprung terminal and insert the cable

paying particular attention to the markings on the cables and the

terminals.

Ensure that the positive cable goes to the positive terminals and

likewise with the negative.

Connecting the Power

IMPORTANT: Please follow the following instructions in sequence.

Connect the mains lead to the back of the A100, connect to wall

socket and were applicable turn on.

1. Connect mains input lead into A100

2. Insert mains plug into allsocket and where applicable turn on.

Airstream Direct

To Free Your Music before even connecting the A100 to a wireless

network, or if you don’t have a wireless router use the A100 in

Airstream Direct mode to still be able to enjoy your music.

Activating this mode creates a wireless network solely between

the A100 and the iOS-device. To connect using Airstream Direct,

follow the steps below:

1. Turn the A100 on from standby.

2. Press the Airstream Direct button on the rear of the A100

(Button 2 on the illustration on page 3).

3. The LED on the front of the unit will momentarily ash purple

and then turn solid purple.

4. On the iOS-device, go to “Settings” and then “Wireless”. Within the

available wireless networks, there should be “Airstream A100...”.

Select “Airstream A100...” from the list then press the home button.

5. With the album cover up, swipe up to reveal the Control Centre.

You should see the AirPlay icon.

6. Press this and select A100 from the list. The AirPlay logo

will now be illuminated. This means that your device will be

playing via AirPlay.

If the Airstream A100 isn’t one of the listed networks,

press the “home” button and try again. It sometimes

takes a few seconds for the network to become

visible.

HINT

While in Airstream Direct mode, cellular data will not

function. So, iMessage, emails and mobile internet

will not function simultaneously.

More than one device can be connected in Airstream

Direct mode, but only one device can play music in

Airstream Direct mode.

If a telephone call is received while in Airstream

Direct mode, music will pause and restart when the

call is ended.

HINTS

Freeing Your Music

Connecting to a WiFi Network.

There are a couple of dierent ways you can register the A100

onto the WiFi network. One method connects the phone directly to

the A100 using the Apple supplied USB lead, while the second uses

the A100’s web portal via a PC, Mac or iOS-device.

What is required?

To connect the A100 to a WiFi network you will need to have the

following:

• A Wireless router.

• For Option 1, either an iPod Touch or iPhone and the Apple

supplied USB lead.

• For option 2, either a PC, Mac, iPod Touch, iPhone or iPad

connected wirelessly to the network. The PC/ Mac must be

connected wirelessly.

• Airstream A100

Option 1.

This is the easiest of the two processes. It uses the wireless

network security information stored on the iOS-device to connect

to and gain access to the network. All you need is a compatible

iPod Touch or iPhone running iOS5 or above.

A list of compatible devices for this method of connection can be

found below:

• iPhone 5

• iPhone 4S

• iPhone 4

• iPhone 3GS

• iPod Touch 5th Generation

• iPod Touch 4th Generation

• iPod Touch 3rd Generation

• iPod Touch 2nd Generation

1. Turn the A100 on from standby mode. The LED on the front

will ash blue, rstly in pattern 2 then pattern 1 sequence.

2. When it changes to Pattern 1 (not connected to a wireless

network), open the cover over the USB socket on the A100 and

connect the USB lead to the A100 and your iOS-device.

3. On the A100, press the Sharing Button (Item 3 on page 3)

4. A prompt will appear on the screen of the iOS-device. This

is just asking if you want to allow the device to share the

security data with the A100. Press “Allow”.

5. The blue LED will then start to ash blue again as per Pattern

2 and turn solid blue when connected to the WiFi network.

6. When the LED is solid blue, remove the USB lead from the

device and the A100. You are now able to start playing music

via AirPlay. Refer to page 11 for instruction on playing music

via AirPlay.

Option 2.

Using this method of connection you need either a wireless enabled

PC/ Mac or an iPod Touch, iPhone or iPad running iOS5 or later.

This method of connectivity involves manually entering the

wireless network name (SSID) and security information (WEP Key)

into the A100’s web portal from either the computer or iOS-device

via a temporary wireless network.

Via iOS-Device

1. Turn the A100 on from standby mode. The LED on the front

will ash blue, rstly in pattern 2 then pattern 1 sequence.

2. When it changes to Pattern 1, it is not connected to a wireless

network. Press and hold the Airstream Connect/ Airstream

Direct Button (Item 2 on Page 3) until the LED on the front

ashes white (Pattern 3). This will take approximately 12

seconds.

3. On the device, go to Settings, then WiFi.

Make a note of the name of the wireless network

(SSID) that you are connecting to and also the security

information (WEP, WPA or WPA2) to ensure the seamless

connection of the A100 to the wireless network.

HINT

If you face problems connecting the A100 using this

method, try using the web portal via the PC/ Mac or the

iOS device.

HINT

4. In the list of available networks you will see Airstream

Connect, select this. When it has been ticked, press the home

button.

5. Here, you have two options, you can scan the QR code (below)

if you have a QR reader on your device. Alternatively, select

Safari and in the address bar at the top, enter 192.168.1.12

6. The A100’s portal page will now be displayed. Select WiFi

Setup from the list on the left hand side.

7. Select the SSID (wireless network) you wish to connect to and

enter the appropriate security details, press save and then

press the home button.

8. There will be a warning pop up appear, just press OK.

Return your device to the original WiFi network so that you can

stream your music.

1. Go to Settings, then WiFi.

2. Select your WiFi network.

3. When the tick appears next to your network, press the Home

button.

4. To start playing music via AirPlay please refer to page 11.

If the IP address 192.168.1.12 doesn’t work, restart

the A100 and press the home button on the device

and then retry steps 4 & 5.

HINT

Via Laptop/ PC

1. Turn the A100 on from standby mode. The LED on the front

will ash blue, rstly in pattern 2 then pattern 1.

2. When it changes to Pattern 1, it is not connected to a wireless

network. Press and hold the AirstreamConnect/ Airstream

Direct Button (Item 2 on Page 3) for approximately 12 seconds

until the LED on the front ashes white (Pattern 3).

3. On the Laptop/ PC, go to the Wireless network selection tool.

4. In the list will be your network (probably with “Connected”

next to it), and any other wireless networks within range. One

of them will be Airstream A100.

5. Click on Airstream A100, and then the Connect button. After

a few seconds, you will be connected to the Airstream A100

wireless network.

Continue to Step 7.

6. On a Mac, click on the wireless network signal strength

indicator located in the bar at the top of the desktop and

select Airstream Connect. Continue to Step 7 below.

On a Windows 7 Machine, click on the WiFi strength

indicator in the bottom right hand corner. If it is

hidden, click on the little up arrow.

HINT

The Laptop or PC, must be wireless enabled with

wireless turned on.

HINT

If Airstream A100 isn’t displayed, click the refresh

arrows (top right corner of the window).

HINT

With both Windows and Mac OS’s, if Airstream A100

isn’t displayed, come out of the selection window and

then try again after a few seconds.

HINT

7. On the computer, open your web browser and in the address

bar at the top of the page, type in the following address to

load the Airstream web portal: 192.168.1.12

8. Click on WiFi Setup on the left hand side of the page. In this

page, you will see the details of the A100 and the “Prole” of

the wireless network you are about to connect to.

9. Click the drop down arrow to select the “Service Set ID”

(SSID). In the list should be your wireless network. Select

your network and enter the security key.

10. Click Apply. When you do, a warning pop up will be displayed,

click OK.

Windows pop up:

Mac pop up:

11. After clicking the OK button on the pop up, there will be no

other visible indication on your browser that the A100 is

connected to the network.

The LED on the A100 will ash blue while it is establishing a

connection to the wireless network and then change to the

previous input mode once it has been connected. This will be

indicated by the LED.

To select AirPlay, press the input toggle button until the LED

is blue.

12. Remember to return to the Available Wireless Networks list

on your computer and reselect your home Wireless Network.

13. To start streaming to the A100 from your PC, Mac or iOS device,

please refer to page 11

If it still ashes red slowly after repeating the above

steps, try moving the A100 closer to the router.

If the LED ashes red slowly (pattern 1), then it has

failed to connect. You will have to repeat the above

steps to try again.

HINTS

FREE YOUR MUSIC

Use Airplay from your iOS-device

Before proceeding, please ensure the A100 is turned on from

standby mode and is registered to the same wireless network as

the device you will be playing back from (LED solid blue).

The A100 will automatically change to AirPlay mode when

streaming has started if it isn’t already selected.

1. On your device, select the music you wish to play.

2. With the album cover up, swipe up to reveal the Control Centre.

You should see the AirPlay icon.

3. Press this and select A100 from the list. The AirPlay logo

will now be illuminated. This means that your device will be

playing via AirPlay.

Using AirPlay from iTunes

Before proceeding, please ensure the A100 is turned on from

standby mode and is registered to the same wireless network as

the device you will be playing back from. The Mac or PC must be

connected to the same network as the A100.

The A100 will automatically change to AirPlay mode if it isn’t

already selected.

1. On the PC/ Mac, open iTunes. By the status window at the top

of iTunes the AirPlay Icon will appear, but only if it has found

the A100 on the network.

2. Click on the icon and select the Airstream A100 from the

devices available. The AirPlay logo will then turn blue.

If the LED on the A100 is ashing, it is either

initialising (Pattern 2) or it is hunting for a wireless

network (Pattern 1). In either state, the AirPlay logo

may not be visible on the iOS-device.

HINT

3. Select the song you wish to play and sit back and enjoy.

In both instances, the LED on the front of the A100 will be blue

when in AirPlay mode. If it doesn’t automatically change to

AirPlay mode when songs start playing, press the AirPlay button

on the A100 or the source buttong on the remote.

Play Another Device Using the Analogue Inputs

The following steps guide you through connecting an analogue

auxiallary device and playing from it.

1. Connect a stereo coaxial cable to the analogue auxialary input

on the back of the A100 and the other end into the device you

wish to play from.

2. Turn the A100 on from standby mode.

3. Press the analogue auxiallary source button on the A100 or

the source button on the remote (item 6 on Page 3) until the

required auxiliary source is selected. The LED on the front

will be Green.

4. Press play on your device.

The A100 will get the volume level from iTunes, not

the PC/ Mac, so remember to check the volume level

of iTunes before playing music.

HINT

Title: i-Deck Remote Control Artwork

Date: 15th February 2010

Notes:

1. ICONS TO BE SILKSCREENED

PANTONE REFERENCE COOL GREY 1M

2. LOGO & TEXT TO BE PRINTED AS BLACK UV SPOT

3. IMAGE FOR REFERENCE PURPOSES ONLY.

4. VERSION 2

The remote will only change the volume when using

this input. You may also have to set the volume to

almost maximum on the device.

HINT

Play Another Device Using the Digital Inputs

The following steps guide you through connecting digital

auxiallary devices and playing from it.

1. Connect an optical cable to the digital auxialary input on the

back of the A100 and/ or a USB cable to the front (iOS device

only) and the other end into the device you wish to play from.

2. Turn the A100 on from standby mode.

3. Press the digital auxiallary source button on the A100 or the

source button on the remote (item 5 on Page 3) until the

required auxiliary source is selected. The LED on the front

will be White for USB and optical.

4. Press play on your device.

Play Another Device Via DLNA

It is possible to stream to the A100 using a wireless device via

DLNA (Digital Living Network Alliance), that isnt iOS enabled.

There are a number of third party apps that use the DLNA protocol,

so please refer to the instructions for your particular application

on how to stream to wireless devices.

The A100 will automatically select a DLNA streaming source

unless an AirPlay source is already playing. AirPlay will always

over-ride DLNA.

When in DLNA Streaming mode, the LED on the front will be blue.

This can be manually selected by pressing the AirPlay/ DLNA

button (item 11, page 3).

Before proceeding, please ensure the A100 is turned on from

standby mode and is registered to the same wireless network as

the device you will be playing back from.

For playback and streaming using a 3rd party app, please refer to

their instructions.

The remote will only change the volume when using

this input. You may also have to adjust the volume

on the device.

HINT

The A100 will automatically switch between

streamed sources, but AirPlay will take priority if

already streaming a DLNA source. Likewise, it will

not change to DLNA if an AirPlay source is either

playing or paused

If the LED on the A100 is ashing blue, it is either

initialising (Pattern 2) or it is hunting for a wireless

network (Pattern 1). In either state, the A100 may not

be visible on the device.

HINTS

Charging via the USB

Before proceeding, please ensure the A100 is turned on from

standby mode.

1. Connect the apple supplied USB lead to the A100 and your device.

Firmware Update.

The A100 automatically searches for software updates whenever

it is turned on (providing there is a connection to the internet).

However, there are other ways of updating the rmware. These

are manually via the internet or via a USB memory stick. Details

of all methods are outlined below.

AutomaticNoticationofFirmwareUpdate

By default the A100 is set up to inform you a rmware update is

available automatically.

1. After the A100 has gone through the initial boot up procedure

and connected to the network (blue LED stops ashing), the

LED will ash white slowly (Pattern 1) indicating that an

update is available.

2. Press and hold the standby button until the LED on the front

is illuminated solid white.

3. Release the button and the LED will then go through various

states and colour changes, indicating dierent stages of the

update process:

White (Flashing very fast) - Updating the rmware.

Cyan (Illuminated for 2 seconds)

OFF - Update complete.

4. Once the update has been successfully completed, the A100

will go through the initial start up procedure as described on

page 4.

5. You may then need to reconnect the A100 to the WiFi network as

described on page 6.

If the LED is slowly ashing red, the update has failed.

Follow the steps for the Manual Update by internet or

USB to ensure its success.

HINT

You can continue to use other sources while you are

charging your device. If you wish to play music from

the device currently charging, we would recommend

using the USB, digital input rather than AirPlay.

HINT

USB Firmware Update

To update the rmware by USB memory stick the update rmware

needs to be downloaded rst.

1. On your PC/ Mac open the internet browser and go to www.

airstream-ma.com and navigate to either the A100 page or

the Support page.

2. Download and save the update le to the USB stick. The

memory stick MUST be formated in FAT32 format and the

update le saved in the root folder. The A100 will not see

the update le if it is saved in a sub folder. When it has been

copied/ saved, safely remove the USB stick.

3. Remove the power from the A100. When the power button LED

has gone out, insert the USB stick.

4. Reconnect the power and turn on the A100. Wake it from

standby (if necessary). It will then go through it’s boot up

procedure and may even go to the last selected source. It will

then start to slowly ash white (pattern 1.)

5. Press and hold the standby button on the A100 until the LED

is solid white.

6. Release the button and the LED will then go through various

states and colour changes indicating dierent stages of the

update process:

White (Flashing very fast) - Updating the rmware.

Cyan (Illuminated for 2 seconds)

OFF - Update complete.

7. Once the update has been successfully completed, it will then go

through the initial start up procedure as described on page 4.

8. You may then need to reconnect the A100 back to your WiFi

network as described on page 6.

Web Browser Firmware Update

It is possible to update the rmware in the A100 via its web page.

There are a number of ways to do this and these are listed below:

i. Via Safari. If you have safari web browser installed, click

on Bonjour and then the bookmarks tab. The A100 should

appear as one of the bookmarks in Bonjour. Continue to

step 1 below.

ii. Via Computer on a Windows 7 PC. Navigate to the Computer

(Start; Computer), and click on Network. Scroll to Media

Devices and double click on Airstream A100 xxxxxx (Where

xxxxxx is the last 6 digits of its unique MAC address).

Continue to Step 1 below.

iii. Via the Control Panel on a Windows 7 PC. Navigate to the

Control Panel and select Hardware and Sound, and then

Devices and Printers. Airstream A100 xxxxxx should be

displayed under the Devices title. Double click to bring up

the Properties window. Click on the UPnP tab and then the

link next to “Webpage”. Continue to Step 1 below.

iv. Via any internet browser. This method can only be done

if the IP address of the A100 is known. If you do not

already know this, it can be found out by going to your

router’s control panel and looking under attached devices

(or similar). Refer to the router’s manual for help on this.

Continue to step 1 below.

v. Via any web browser. This method can only be done if the

last 6 digits of the MAC address are known. In the address

bar of the browser, type in the following:

http://airstream-A100-xxxxxx.local./index.asp

Where xxxxxx is the last 6 digits of the MAC address.

WARNING: Do not, at any point during the update

procedure remove the power from the A100, or click

back on the web browser. Follow the on screen

instructions and the instructions in this manual.

1. Download the updated rmware from the Airstream website

www.airstream-ma.com/support and save it to your computer.

2. Connect to the A100 using one of the 5 methods outlined

above and click on the Firmware Update tab.

If the LED is slowly ashing red, the update has

failed. Try repeating the above steps for installing

the update or try the USB method as outlined next.

HINT

3. Click on the drop down menu next to ‘Update Method’ and

select the only option available which is “Firmware Update

From Network”.

4. Click on Ok. The page will change with a note to say it should

refresh in a couple of seconds, or click a link. Click the link

(if it doesn’t refresh).

The LED on the A100 will turn white.

5. Next, click on “Choose File” and navigate to the location the

updated rmware le was saved to. Select it and click open.

6. Click on “Upload”.

7. Check the details of the le on the web page and click “OK”.

8. The web page will now change showing the progress of the

update. At the same time, the LED will go through various states

and colour changes indicating dierent stages of the update

process:

White (Flashing very fast) - Updating the rmware.

Cyan (Illuminated for 2 seconds)

OFF - Update complete.

The A100 will now go into standby mode.

9. The update is now complete. The web page might not say that

it is 100% complete, but when the A100 goes into standby

mode (standby button illuminated red), it has completed the

update process. Close the web browser.

10. Press the standby button and the A100 will go through the

initial start up procedure described on page 4.

If the update sequence diers from above, the update

may have failed. Please retry using the USB update

or web portal update. Also check the support section

of www.airstream-ma.com

HINT

If the A100 is placed into Ready Mode while an iOS-

device is connected via USB, it will continue to charge.

HINT

Checking Firmware Version

It is possible to see what version of rmware and software the

A100 is running. This may be needed when contacting Monitor

Audio.

1. With the A100 powered up and out of standby mode, connect

your iOS-device to the USB port of the A100 using the Apple

supplied lead.

2. On the device, go to Settings, then General and then About.

3. In the About section scroll down the screen to you see

Airstream A100.

4. Select Airstream A100 and you will see a screen showing the

Manufacturer, Model, rmware version and hardware version.

Ready Mode

What is Ready Mode?

Ready Mode is another form of standby. However, when in Ready

Mode, the A100 will also automatically awake if you try to play

something via USB, AirPlay or Airstream Direct.

How to Enter Ready Mode

1. With the A100 turned on and out of standby mode (LED not

ashing), press and hold the standby button for about 3

seconds.

2. The LED will start to ash orange indicating it is entering

Ready Mode. When it stops ashing and is illuminated yellow,

the A100 is now in Ready Mode.

It is now possible to automatically wake the A100 by either

connecting a device via the USB or streaming to it via AirPlay.

The A100 cannot be put into Ready Mode using the remote.

Factory Reset

Should the situation arise where you need to carry out a factory

reset because of problems or diculties with the A100, follow the

steps below.

1. With the A100 powered up and out of standby mode, press and

hold the Sharing Button for approximately 12 seconds (Item

3 on page 3).

2. The LED on the front will turn red and the A100 will go into

standby mode. When this happens, the settings have been

reset.

Changing the Remote Battery

1. Holding the remote in your hands with the standby button

pointing away from you, push back on the black half of the

remote.

2. Separate the two halves and the battery will be present in the

black half of the remote.

3. Slide the battery out and replace only with the same type,

CR2025 3v.

Page is loading ...

Monitor Audio AirStream A100 User manual

Brand: Monitor Audio

Model: AirStream A100

Category: Digital audio streamers

Type: User manual

This manual is also suitable for

Download PDF

report

Monitor Audio AirStream A100 User manual

This manual is also suitable for

Monitor Audio AirStream A100 User manual

Related papers

Other documents