Celestron 93609 User manual

Celestron
Brand
Celestron
Model
93609
Category
Security camera accessories
Type
User manual

This manual is also suitable for

INSTRUCTION MANUAL
ITEM #93609
Pi g g y b a c k Mo u n t – Fo r a l l Sct’S
In s ta l l at I o n – Fo r 5”, 6”, 8” a n d 9.25” Mo d e l s
1. Remove the two screws on the rear cell of the telescope
tube that attach the StarPointer finderscope.
2. Align the slotted holes on the piggyback mount with the
holes in the rear cell of the telescope.
3. For NexStar SE models - Place the StarPointer on top of
the piggyback adapter so that the holes on the
StarPointer bracket overlap the holes on the adapter.
(It may be easier to remove the StarPointer from its
bracket first).
4. Take the appropriate size screws included with the
adapter and insert them through the holes, tightening
them until the adapter is flush against the rear cell.
5. You are now ready to mount a camera or spotting scope
on top of the piggyback mount. To do this, locate the
threaded mounting hole on the bottom of your camera
or spotting scope. Place the camera or spotting scope
on the top of the piggyback adapter and thread in the
1/4 - 20 bolt and tighten.
F
i g u r e 1 – Pi g g y b a c k a d a P t e r o n nXSe
Fi g u r e 2 – Wi t h t h e Pi g g y b a c k ad a P t e r , St a r Po i n t e r
a n d ca m e r a a t t a c h e d .
StarPointer
Finderscope
t
Piggyback
Adapter
t
¼”x20
Mounting Bolt
t
The Celestron Piggyback Mount is a great accessory for
all observers interested in deep-sky astrophotography.
This specially designed adapter allows you to attach
your camera to the top of any Celestron SCT/ EdgeHD
telescope. When using with a NexStar SE model,
the adapter can be mounted while still utilizing your
StarPointer finderscope for telescope alignment.
Included with the Piggyback Mount are the following items:
• PiggybackMountAssembly
• Adapterplate(for11”and14”SCT)
• Two–M4x16mmMountingScrewsfor6SE
Telescopes
• Two–8-32x5/8”MountingScrewsfor5SE,
8”and9.25”Telescopes
• Two–8-32x7/8”MountingScrewsforC11andC14
english
In s ta l l at I o n – Fo r C11 a n d C14 Mo d e l s
1. Remove the two screws on the rear cell of the telescope
tube (opposite the position of your finderscope).
2. Align the slotted holes on the adapter plate with the
holes in the rear cell of the telescope.
3.Insertthe8-32x7/8”screwsthroughtheholesinthe
adapter plate and thread them into the rear cell.
4. For C11 Telescopes - Place the Piggyback adapter on
top of the adapter plate so that the holes in the
piggyback adapter are aligned with the two left-most
holes (when standing behind the rear cell of the
telescope). Using these holes ensure that your camera
will be level when placed on the mounting platform of
the adapter.
5. For C14 Telescopes - Place the Piggyback adapter on
top of the adapter plate so that the holes in the
piggyback adapter are aligned with the two right-most
holes (when standing behind the rear cell of the
telescope). Using these holes ensure that your camera
will be level when placed on the mounting platform of
the adapter.
6.Insertthe8-32x5/8” screws through the holes in the
piggyback adapter and thread them into the holes on
the adapter plate.
7.Youarenowreadytomountacameraorspottingscope
on top of the piggyback mount. To do this, locate the
threaded mounting hole on the bottom of your camera
or spotting scope. Place the camera or spotting scope
on the top of the piggyback adapter and thread in the
1/4 - 20 bolt and tighten.
F
i g u r e 3 – Wi t h t h e Pi g g y b a c k ad a P t e r , ad a P t e r Pl a t e
F o r c11/c14
Piggyback
Mount
Adapter
Plate
C11 Holes
t
t
t
t
t
t
C14 Holes
Fi g u r e 4 – Wi t h t h e Pi g g y b a c k ad a P t e r , ad a P t e r Pl a t e
F o r c11/c14
Adapter
Plate
t
PiggyBack Adapter
t
2835ColumbiaStreet•Torrance,CA90503U.S.A.
Telephone:310.328.9560•Fax:310.212.5835
©2010 Celestron
Allrightsreserved.•PrintedinChina•08-10
Product design and specifications are subject to change
without prior notification.
Designed and intended for those 13 years of age and older.
WarnInG: IF y o u r e M o v e t h e PI G G y b a C k Mo u n t ,
d o n o t t h r e a d t h e s C r e W s b a C k I n t o t h e r e a r C e l l
o F t h e t e l e s C o P e a l l t h e W a y . th e s C r e W s a r e l o n G
e n o u G h t o o b s t r u C t t h e M o v e M e n t o F , a n d P o s s I b ly
C h I P t h e P r I M a r y M I r r o r .
yo u r Ce l e s t r o n a C C e s s o r y h a s a o n e y e a r l IM Ite d W a r r a n t y .
P
l e a s e s e e t h e Ce l e s t r o n W e b s I t e F o r d e t a I l e d I n F o r M a t I o n o n a l l
C
e l e s t r o n a C C e s s o r I e s a t W W W .C e l e s t r o n .C o M .
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10

Celestron 93609 User manual

Celestron
Brand
Celestron
Model
93609
Category
Security camera accessories
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents