Page is loading ...
INSTRUCTION MANUAL
A-267DTM Version 1.0 1/1
A-267DTM
WARNING:
⋅ Installation by qualified personnel only.
⋅ Speakers must be wired in parallel and connected to
the correct line terminals of amplifier.
⋅ Ensure that all speakers have the same polarity with
respect to each other.
⋅ Do not select another tapings if the speaker is in use.
⋅ No naked flame sources, such as li
g
hted candles,
should be placed on the apparatus.
CEILING SPEAKER
SPECIFICATIONS
Step 1 – Cutout a Ø 200 mm circle on the ceiling. Use a cardboard
cutout template or a circular cutter set to the required cutout
size.
Step 2 – Place the mounting bracket into the hole.
Step 3 – Loose the 2 wing bolts and slide the fixing plates until the
bracket is fixed to the ceiling. Fixing plates can be bent if
necessary. Tighten the 2 wing bolts.
Step 4 – Connect input cable to the transformer terminal.
Step 5 – Hang the speaker suspension springs on the hooks of
mounting bracket.
Step 6 – Push the speaker towards the hole till it reaches its correct
position.
Model A-267DTM
Loudspeaker Two way: 6,5” + 2”
Rated Power (RMS) 8 W
Power Taps 100 V 8 W, 4 W, 2 W & 1 W
Power Taps 70 V 4 W, 2 W, 1 W & 0,5 W
Impedance
1’25 kΩ, 2’5 kΩ, 5 kΩ & 10 kΩ
Sensitivity 95 dB SPL at 1 W, 1 m & 1 kHz
Sound Pressure 104 dB SPL at 8 W, 1 m & 1 kHz
Freq. Range 80 ~ 20.000 Hz
Dispersion 1 kHz / 4 kHz 140º / 65º
Operation temperature -20º C ~ +60º C
Cutout Size Ø 200 mm
Dimension (mm) Ø 230 x 127 (depth)
Weight 1,7 kg
Finish Metal
Colour White, RAL 9003
Mounting Springs and bracket
Power selection Transformer taps
INSTALLATION GUIDE
/