Halo HU2018EX2P830P Installation guide

Type
Installation guide

The Halo HU2018EX2P830P is a magnetic LED under-cabinet expansion kit that provides bright, energy-efficient lighting for your kitchen or workspace. With its easy installation process, you can quickly and easily add more lighting to your existing Halo HU20 system. The kit includes two magnetic LED pucks, a driver with connector and plug, and all the necessary mounting hardware. The magnetic pucks can be moved or removed while the system is on, and you can add more pucks to the system at any time.

The Halo HU2018EX2P830P is a magnetic LED under-cabinet expansion kit that provides bright, energy-efficient lighting for your kitchen or workspace. With its easy installation process, you can quickly and easily add more lighting to your existing Halo HU20 system. The kit includes two magnetic LED pucks, a driver with connector and plug, and all the necessary mounting hardware. The magnetic pucks can be moved or removed while the system is on, and you can add more pucks to the system at any time.

IMPORTANT SAFETY INFORMATION
READ CAREFULLY FOR YOUR PROTECTION AND SAVE THESE INSTRUCTIONS
• Forindooruseonly
• Donotinstallcloserthan6”toanycurtainorsimilarcombustiblematerial
• Toavoidhazardtochildren,accountforallpartsanddestroyallpackingmaterials
• Useonlyinsulatedstaplesorplastictiestosecureloosewires
• Ensurewiresarenotpinched
• Routeandsecurewirestopreventdamage
• Donotinstallabovesourcesofheatsuchastoastersandovens
• Neveraltertheconductorcord
• DonotinstallmorethanoneLEDpuckper6”oftrack
INSTRUCTIONS
1.Pushendcap(s)ontrackassembly(Fig.1,2).Ifnecessary,remove1endcapfromconnectingtrack
assembly.
2.Positiontrackassemblyonmountingsurface.
3.Holdandscrewthetrackmountingscrews(Fig.2).
4.Attachtrackconnectorbysnappingorslidingintopositiononbothtracks.Ensurethatthe2electrical
contactsonthebackoftheconnector(Fig.3,4)sitonthe2trackconductorstrips(Fig.1).Thesemay
bemountedanywherealongthelengthofthetrack(Fig.5).
5.PlacethemagneticLEDpucks(Fig.6)onthe2trackconductorstrips.Thesemaybemovedalongthe
lengthofthetrack.
NOTE:Ifsystemdoesnotappeartoturnon,checktheconnectionofthepucksandconnectorsby
movingthemuntilconnectionisestablished.Pucksmaybemovedorremovedwhilesystemison.More
puckscanbeaddedtothesystematanytime.
CooperLighting-1121Hwy74South-PeachtreeCity,GA30269-770-486-4800705263INS
HU20 Magnetic LED Under Cabinet Expansion Kit Installation Instructions
HALO
®
HU20 Expansion Kit
page 1
Figure 4 Figure 5
Figure 2
TrackConductorStrips
TrackAssembly(1)
EndCap(2)
TrackMounting
Screws
DriverMounting
Screws(2)
DriverwithConnector
andPlug(1)
DriverConnector
LEDPuck(2)
Figure 1
TrackConductorStrips
EndCap
Figure 3
Electricalcontactsforconnector
Figure 6
MagnetsforLEDPuck
attachmentandelectrical
contact
Note:Donotinstallmorethanone
LEDpuckper6”oftrack.
Avoid Fire or Electric Shock
Follow installation instructions
carefully.
If unsure about electrical installation
consult a qualified electrician.
  • Page 1 1
  • Page 2 2
  • Page 3 3

Halo HU2018EX2P830P Installation guide

Type
Installation guide

The Halo HU2018EX2P830P is a magnetic LED under-cabinet expansion kit that provides bright, energy-efficient lighting for your kitchen or workspace. With its easy installation process, you can quickly and easily add more lighting to your existing Halo HU20 system. The kit includes two magnetic LED pucks, a driver with connector and plug, and all the necessary mounting hardware. The magnetic pucks can be moved or removed while the system is on, and you can add more pucks to the system at any time.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI