HP PHOTOSMART 2570 User manual

Brand: HP

Model: PHOTOSMART 2570

Type: User manual

HP PHOTOSMART 2570 is a versatile all-in-one device that offers a range of features to enhance your productivity and creativity. With its user-friendly design and intuitive controls, you can effortlessly print, scan, copy, and fax documents, photos, and more. The HP PHOTOSMART 2570 is equipped with a built-in color graphics display, allowing you to preview and edit your documents and photos before printing. The device also features advanced scanning capabilities, enabling you to capture high-quality images and documents with ease.

HP Photosmart 2600/2700 series all-in-one

User Guide

HP Photosmart 2600/2700 series all-in-one

User Guide

௃Ԫ೎໠ۖ

ᓮࠌشءਐত๻ࡳ࿏᧯ࠀຑ൷!HP All-in-One!ࠩ൞ऱሽᆰࢨጻሁΖڕ࣠൞ڇڜᇘழ࿇سٚ۶ംᠲΔᓮ೶ᔹءਐত࿑

৵ऱψ!ᅸᜲ௶၌!ωΖ

ඊದᚾ॰Δྥ৵ᐺൾᇘᆜؐᢰऱᓄ൅Ζ

ᐺൾࢬڶᓄ൅

HP Photosmart 2570 All-in-One series Setup Guide

USB!ᨱᒵࠌشृΚ!ڇءਐতਐق൞հছΔᓮ֎ຑ൷!USB!ᨱᒵΔܡঞຌ

᧯ױ౨ྤऄإᒔڜᇘΖ

ބנሿٙ

1! Windows CD

2! Macintosh CD

3! ࠌشृਐত

4! ሽᄭᒵፖሽᄭ᠏൷ᕴ

5! 4x6!૎ٹΰ10x15!ֆ։αઌׂ౐

6! ٨ٱᕠܚ

7! USB!ᨱᒵ

8! Ԭ֜ጻሁᨱᒵ

9! ൳ࠫ؀૿ࣨΰױ౨բቃ٣ᇘړα

! ץᇘฏփ୲ױ౨ڶࢬ஁ฆΖءਐত࿑৵ᄎ

ᎅࣔࠡהጻሁ๻ໂΖ

Remove all tape

Start Here

Use this guide to set up the hardware and connect the HP All-in-One to either your computer or a working network. If

you have problems during setup, see Troubleshooting later in the guide.

Lift the access door and remove tape on the left side of the

device.

HP Photosmart 2570 All-in-One series!Ԋ၆ࡾࠒ

USB cable users: Do not connect the USB cable until this guide instructs

you to or the software may not install properly.

Locate components

1 Windows CD

2 Macintosh CD

3 User Guide

4 Power cord and adapter

5 4x6 in (10x15 cm) photo paper

6 print cartridges

7 USB cable

8 Ethernet cable

9 Control panel faceplate (may be pre-

attached)

The contents of your box may differ.

Additional network equipment speciﬁ ed

later in guide.

2 • HP All-in-One

ᇘՂ൳ࠫ؀૿ࣨΰૉࡸآᇘՂα

ඊದ൑ۥቹݮ᧩قᕴ

HP All-in-One!ؘႊᇘՂ൳ࠫ؀૿ࣨթ౨ሎ܂Μ

a!!ല൳ࠫ؀૿ࣨᆜ࣍ᇘᆜհՂΖ

b !ڇ።ׂऱࢬڶᢰᒴՂ݁֌شԺਊՀאᇘՂ،Ζ

੡Աᛧ൓່ࠋᛀီய࣠Δᓮᐺൾ᧩قᕴՂऱঅᥨᓂΖ

Attach the control panel faceplate (if not attached)

The control panel faceplate must be attached for the

HP All-in-One to work!

Lift color graphics display

a Position the control panel faceplate above the

device.

b Press down ﬁ rmly on all edges of the overlay to

secure it.

For best viewing, remove the protective ﬁ lm from the

display.

HP All-in-One • 3

࣋Եཏຏػ౐

൷Ղሽᄭᒵ

USB!ᢟጣٺҢޱȈ!!ڇءਐত࿑৵ਐقհছΔ

լ૞ຑ൷!USB!ᨱᒵΖ

Load plain white paper

Connect the power cord

USB cable users: Do not connect the USB

cable until instructed later in this guide.

4 • HP All-in-One

ၲඔᚾ॰

ਊՀψၲඔωਊၨ

ᐺൾࠟଡᕠܚՂऱᓄ൅

!b!! ൞ਊՀψ!໠ం!ω !ਊၨհ৵ΔጸᗉᄎೂᡩΔྥ৵᧢ګ਍ᥛॽጸᗉΖڼመ࿓ױ౨૞क़

ԫ։ᤪऱழၴΖ

!c!! ᓮ࿛ଢ٨ٱᕠܚ༼ق৵٦ᤉᥛΖ

ඊದᚾ॰ऴࠩ،ೖ۰੡ַΖ

٨ٱᄶ೯ਮᄎฝ೯ࠩ׳ೡΖ

ࢮ೯ృદۥᑑ᧘אᐺൾ!ڍএ!٨ٱᕠܚऱᓄ൅Ζ

ᓮ֎൷ᤛᎭۥऱ൷រࢨૹᄅലᓄ൅၀ڃᕠܚΖ

໠ం

Press the On button

Open the access door

a After you press the On button, the green light ﬂ ashes, and then becomes solid. This

may take up to a minute.

b Wait for the print cartridge prompt before continuing.

Lift the access door until it stops. The print

carriage moves to the right.

Remove tape from both cartridges

Pull the pink tab to remove the tape from both print cartridges.

Do not touch the copper-colored contacts or retape the cartridges.

HP All-in-One • 5

༺ԵԿۥ٨ٱᕠܚ

ڇ༺Ե٨ٱᕠܚհছΔᇘᆜؘႊڇ!໠ం!णኪΖ

ᅝᇘᆜၲඔழΔ٨ٱᕠܚᄎڇ׳ೡΖ

a!!༽۰!έՓ!٨ٱᕠܚΔᨃ!HP!ᑑ᧘ཛՂΖ

b !ല!έՓ!٨ٱᕠܚᆜԵᑑقጸۥᑑ᧘ऱ!Ѿ

!༺ᑒছֱΖ

c!! ᡹ᅝچലᕠܚංၞ༺ᑒխΔ

ऴࠩ،ࡐࡳ੡ַΖ

Insert the tri-color print cartridge

The device must be On before you can insert

the print cartridges.

When the device is on, the print carriage is on

the right side.

a Hold the tri-color print cartridge with

the HP label facing up.

b Place the tri-color print cartridge in

front of the left slot marked with the

green label.

c Push the cartridge ﬁ rmly into the slot

until it snaps into place.

6 • HP All-in-One

༺Ե႕ۥ٨ٱᕠܚ

a!!༽۰!༃Փ!٨ٱᕠܚΔᨃ!HP!ᑑ᧘ཛՂΖ

b !ല!༃Փ!٨ٱᕠܚᆜԵᑑق႕ۥࡉᖪۥᑑ

᧘ऱ!ѡ!༺ᑒছֱΖ

c!! ᡹ᅝچലᕠܚංၞ༺ᑒխΔ

ऴࠩ،ࡐࡳ੡ַΖ

d!!ᣂຨᕠֽܚޓངᚾ॰Ζ

Insert the black print cartridge

a Hold the black print cartridge with the

HP label facing up.

b Place the black print cartridge in front

of the right slot marked with the black

and orange label.

c Push the cartridge ﬁ rmly into the slot

until it snaps into place.

d Close the access door.

HP All-in-One • 7

ீإ٨ٱᕠܚ

ؚၲሽᆰऱሽᄭ

a !ڇ൳ࠫ؀ऱޢଡ༼قխਊψ OK!ωאၲࡨீإ٨ٱᕠܚΖ

ீإመ࿓ױ౨ᄎक़༓։ᤪऱழၴΖ

b !٨ٱீإ଄հ৵Δீإ༉ጩݙګΖᛀီ൑ۥቹݮ᧩قᕴא਷઎णኪΔྥ৵ਊ

ψ!OK!ωΖڕ࣠ீإ؈ඓΔᓮࠌشཏຏػ౐٦ᇢԫڻΖᓮ೶ᔹπࠌشृਐতρ

אᛧ൓ᇡาᇷಛΖ

ڃگࢨهඵᇠீإ଄Ζ

a!!ؚၲሽᆰऱሽᄭΔؘ૞ழᓮ࿆ԵΔ൷ထ࿛ଢோ૿נ෼Ζ

b!!ᣂຨٚ۶ၲඔऱ࿓ڤΖ

Align the print cartridges

Turn on your computer

a Press OK at each of the prompts on the control panel to start print cartridge

alignment.

The alignment may take a few minutes.

b After the page prints, alignment is complete. Check the color graphics display for

the status, and then press OK . If it fails, try again with plain white paper. See the

User Guide for more information.

Recycle or discard the alignment page.

a Turn on your computer, login if necessary, and then wait

for the desktop to appear.

b Close any open programs.

8 • HP All-in-One

ᙇᖗψԫጟωຑᒵᣊীΰA!ࢨ!Bα

ڕ࣠൞უ૞ऴ൷ലᇘᆜຑ൷ࠩԫ؀ሽᆰΔᓮࠌشڼຑᒵᣊীΖ!Ȟӵ೺ᡝࡾҰ

ௌ໌՗ϞࠉȂ፜ϼ೿௥ȟȄ!

Ꮑ૞ऱ๻ໂڶΚ!USB!ᨱᒵΖ

!षٺҢ!VTC!೿ጣȂ፜୤Ꭷ!A!ഋϷޟࡾҰȞ಑!9!ॲȟȄ!

AȈUSB!೿ጣ!.!፜ӑϚौ೿ጣ

ڕ࣠൞უ૞ڇᇘᆜࡉሽᆰհၴࠌشԬ֜ጻሁᨱᒵຑᒵΔᓮࠌشڼຑᒵᣊীΖ

Ꮑ૞ऱ๻ໂڶΚ!ႃᒵᕴ0ሁطᕴ0ٌངᖲࡉԬ֜ጻሁᨱᒵΖ

!षٺҢΚЊᆩၯᢟጣ೿ጣȂ፜୤Ꭷ!B!ഋϷޟࡾҰȞ಑!11!ॲȟȄ!

BȈΚЊȞԤጣȟᆩၯ

!୰ᚠȈ!!ڕᏁ๻ࡳጻሁऱᇷಛΔᓮ۟!!www.hp.com/support!ΔᙁԵ! Photosmart 2570!Δྥ৵ჼ༈!

Network Setup!ΰጻሁ๻ࡳαΖ

Choose ONE connection type (A or B)

Use this connection type if you want to connect the device directly to one

computer. (Do not connect until the software instructs you to.)

Equipment needed: USB cable.

For a USB connection, go to Section A (page 9) for instructions.

A: USB Connection - Do not connect yet

Use this connection type if you want an Ethernet cable connection between

the device and your network.

Equipment needed: hub/router/switch and Ethernet cable.

For an Ethernet cable connection, go to Section B (page 11) for instructions.

B: Ethernet (Wired) Network

Questions: For information on how to set up a network, go to www.hp.com/support, enter Photosmart 2570 ,

and search for Network Setup .

HP All-in-One • 9

A!ഋϷȈUSB!೿ጣ

ᙇᖗإᒔऱ!CD

ڕ࣠޲ڶ᧩قඔ೯྽

૿ΔᓮຑਊࠟՀψ!רޟ

Ⴋသ!ωΕຑਊࠟՀ!

CD-ROM!!ቹقΔྥ৵ຑ

ਊࠟՀ! setup.exe Ζ

a!!༺Ե!HP All-in-One Windows CDΖ

b!!ࠉᅃᘛኟՂऱਐقڜᇘຌ᧯Ζ

c!!ڇψ ೿ጣ᜸࠮ω྽૿Δᓮᒔࡳᙇ࠷ψޢ௥೿௥

ՍԪႫသωΖᤉᥛࠩՀԫ଄Ζ

a!!ބנ!HP All-in-One Macintosh CDΖ

b !ᤉᥛࠩՀԫ଄Ζ

Windows!ٺҢޱȈ Macintosh!ٺҢޱȈ

Section A: USB Connection

Choose the correct CD

If the startup screen

does not appear,

double-click

My Computer , double-

click the CD-ROM icon,

and then double-click

setup.exe .

Windows Users:

a Insert the HP All-in-One Windows CD.

b Follow the onscreen instructions to install the

software.

c On the Connection Type screen, make sure to

select directly to this computer . Continue to

the next page.

a Locate the HP All-in-One Macintosh CD.

b Continue to the next page.

Macintosh Users:

10 • HP All-in-One

ຑ൷!USB!ᨱᒵ

Connect the USB cable

Windows!ٺҢޱȈ

Macintosh!ٺҢޱȈ

a !ࠉᅃᘛኟՂऱਐقၞ۩Δऴࠩ൞઎ࠩ༼قຑ

൷!USB!ᨱᒵΖ

ΰຍױ౨ᄎक़༓։ᤪऱழၴαΖ

! נ෼༼قழΔല!USB!ᨱᒵԫᙰຑ൷ࠩ!

HP All-in-One!৵ֱऱຑ൷കՂΔྥ৵ല׼ԫ

ᙰຑ൷ࠩ൞ሽᆰՂऱ!ӈդΙএ!USB!ஃ!Ζ

b !ࠉᅃᘛኟՂऱਐقၞ۩Ζݙګ

ψ!!ҳ։ຝыω྽૿Ζ

a !ല!USB!ᨱᒵൕሽᆰຑ൷۟ᇘᆜ৵ֱऱ!

USB!കΖ

b!!ຑਊࠟՀ!!HP All-in-One Installer!!ቹقΖ

c!! ᒔࡳ൞ݙګࢬڶ྽૿ΔץਔψSetup Assistant

ΰ๻ࡳ࠰ܗαωΖ

ᓮ೶ᔹਐতऱહ૿Δᐙٱԫٝྒྷᇢ଄

Windows Users:

Macintosh Users:

a Follow the onscreen instructions until you see

the prompt to connect the USB cable. (This

may take several minutes.)

Once the prompt appears, connect the

USB cable to the port on the back of the

HP All-in-One, and then to any USB port on

your computer.

b Follow the onscreen instructions. Complete

the Sign up now screen.

a Connect the USB cable from your computer to

the USB port on the back of the device.

b Double-click the HP All-in-One Installer icon.

c Make sure you complete all screens, including

the Setup Assistant.

Go to back of the guide to make a test copy

HP All-in-One • 11

a!!ஞנᇘᆜ৵૿ऱ႓ۥ༺௕Ζ

!b !ലԬ֜ጻሁᨱᒵऱԫጤຑ൷ࠩᇘᆜ৵૿ऱԬ֜ጻሁຑ൷കΖ

c ! ലԬ֜ጻሁᨱᒵऱ׼ԫጤຑ൷ࠩႃᒵᕴ0ሁطᕴ0ٌངᖲΖڕ࣠ᨱᒵլജ

९Δױא᝜၇ለ९ऱᨱᒵΖ

B!ഋϷȈΚЊȞԤጣȟᆩၯ

!१ौȈ!ᓮլ૞ലԬ֜ጻሁᨱᒵຑ൷ࠩᨱᒵᑇᖕᖲΖ

൞ؘႊຑՂጻሁΖڕ࣠൞բᆖຑ൷!USB!ᨱᒵΔᓮլ૞ຑ൷Ԭ֜ጻሁᨱᒵΖ

ຑ൷Ԭ֜ጻሁᨱᒵ

ᙇᖗإᒔऱ!CD

Windows!ٺҢޱȈ Macintosh!ٺҢޱȈ

a!༺Ե!HP All-in-One

Windows CDΖ

a!༺Ե!HP All-in-One

Macintosh CDΖ

Section B: Ethernet (wired) network

Important: Do not connect the Ethernet cable to a cable modem.

You must have a working network. If you already connected the USB cable, do not

connect the Ethernet cable.

a Remove the yellow plug from the back of the device.

b Connect one end of the Ethernet cable to the Ethernet port on the back of

the device.

c Connect the other end of the Ethernet cable to the hub/router/switch. If

the cable is not long enough, you can purchase a longer cable.

Connect the Ethernet cable

Choose the correct CD

a Insert the HP All-in-One

Macintosh CD.

a Insert the HP All-in-One

Windows CD.

Windows Users: Macintosh Users:

12 • HP All-in-One

b!ࠉᅃᘛኟՂऱਐقڜᇘຌ᧯Ζ

c!!!ڇψ!!೿ጣ᜸࠮ω྽૿Δᓮᒔࡳᙇ࠷

ψ!!ആႆᆩၯωΖࠉᅃᘛኟՂऱਐقၞ۩Ζ

d!൞ؘႊڇࢬڶऱႇ᧯ಛஒנ෼ழᙇᖗ!

!unblock!ΰᇞೈαࢨ!!accept ΰ൷࠹αΔܡঞڜ

ᇘᄎ؈ඓΖࠉᅃࢬڶᘛኟՂऱਐقၞ۩Ζᤉᥛ

ࠩՀԫ଄Ζ

!୰ᚠ!Κ!߻੅ຌ᧯ࢨႇ᧯࿓ڤױ౨ᄎॴᡶຌ᧯ڜᇘΖڕᏁᇡาᇷಛΔᓮ۟!!www.hp.com/support ΔᙁԵ!

!Photosmart 2570!Δྥ৵ჼ༈! Firewalls ΰ߻־ᛥαΖ

Windows!ٺҢޱȈ

Macintosh!ٺҢޱȈ

b!!ຑਊࠟՀ! HP All-in-One Installer!!ቹقΖ

c!! ᒔࡳ൞ݙګࢬڶ྽૿ΔץਔψSetup

Assistantΰ๻ࡳ࠰ܗαωΖ

ᤉᥛࠩՀԫ଄Ζ

ڕ࣠޲ڶ᧩قඔ೯྽૿ΔᓮຑਊࠟՀψ!רޟႫ

သ!ωΕຑਊࠟՀ!!CD-ROM !ቹقΔྥ৵ຑਊࠟՀ!

setup.exe Ζ

ᥛՂ଄

Questions : Anti-virus or ﬁ rewall programs can block software installation.

For details, go to www.hp.com/support , enter Photosmart 2570 , and then search for Firewalls .

b Double-click the

HP All-in-One Installer icon.

c Make sure you complete all screens,

including the Setup Assistant. Continue to

the next page.

b Follow the onscreen instructions to install the

software.

c On the Connection Type screen, make sure to

select through the network . Follow the onscreen

instructions.

d You must choose unblock or accept on all

ﬁ rewall messages or setup will fail. Follow

all onscreen instructions. Continue to the

next page.

If the startup screen does not appear, double-click

My Computer , double-click the CD-ROM icon, and

then double-click setup.exe .

Continued

Windows Users:

Macintosh Users:

HP All-in-One • 13

ጊᣄඈᇞ

!୰ᚠȈ!נ෼ψ!ྤଢ଼࢜њ՞!ωಛஒΖ

!ଢ଼հȈ!ၲඔᚾ॰Ζ堚ೈᇘᆜᇙ૿ऱᓄ൅ΖലሽᄭᣂຨΔྥ৵࿛ଢԫ։ᤪΖ٦ၲඔሽᄭΖ

ڕ࣠൞ऱጻሁՂڶࠡהሽᆰΔᓮڇޢԫ؀ሽᆰՂڜᇘ!HP All-in-One!ຌ᧯Ζޢڻڜᇘ

ழᓮᙇᖗإᒔऱ!HP All-in-One CDΖ

ࠉᅃᘛኟՂऱਐقၞ۩Ζᓮᒔࡳڇጻሁࡉ!HP All-in-One!հၴΰլਢሽᆰࡉጻሁհ

ၴαᙇᖗຑᒵᣊীΖ

ڇࠡהሽᆰՂڜᇘຌ᧯!

ᓮ೶ᔹ່৵ԫ଄ᐙٱԫٝྒྷᇢ଄

Troubleshooting

Problem: A Carriage Jam message appears.

Action: Open the access door. Remove the tape from inside the device. Turn the power off,

and then wait one minute. Turn the power on again.

If you have additional computers on your network, install the HP All-in-One software on

each computer. Choose the correct HP All-in-One CD for each installation.

Follow the onscreen instructions. Make sure that you choose the connection type

between the network and your HP All-in-One (not between your computer and the

network).

Install software on additional computers

Go to the last page to make a test copy

14 • HP All-in-One

!୰ᚠȈ!!޲ڶ઎ߠᘛኟ༼ق൞ຑ൷!USB!ᨱᒵΖ

!ଢ଼հȈ!!ஞנ!HP All-in-One Windows CDΔ٦ૹᄅ༺ԵΖ೶ᔹ!A!ຝ։Ζ

!୰ᚠȈ!!נ෼ψ!᠍ߔٺҢཱིቨ฽ᡝᆠ᡹!ω྽૿Ζ

!ଢ଼հȈ!!ਊԫՀψ!ڥੑ!ωΖࢸൾ!USB!ᨱᒵΔ٦༺Ե!HP All-in-One Windows CDΖ

೶ᔹ!A!ຝ։Ζ

!୰ᚠȈ!!נ෼ψ!၆ညԊ၆ฒݲ໷ցׇԙ!ω྽૿Ζ

!ଢ଼հȈ!!ᛀ਷൳ࠫ؀૿ࣨਢܡڶ᡹ࡐᇘړΖࢸՀ!HP All-in-One!ऱ༺ᙰΔྥ৵٦ല،༺ՂΖ

ᛀ਷ࢬڶຑᒵΖᒔࡳ!USB!ᨱᒵբ༺ࠩሽᆰΖᓮ֎ല!USB!ᨱᒵ༺ࠩ᝶ᒌࢨਢሽᄭآၲඔ

ऱႃᒵᕴΖ೶ᔹ!A!ຝ։Ζ

ጊᣄඈᇞ

Troubleshooting

Problem: You did not see the screen prompting you to connect the USB cable.

Action: Remove, and then re-insert the HP All-in-One Windows CD. Refer to Section A.

Problem: The Microsoft Add Hardware screen appears.

Action: Click Cancel . Unplug the USB cable, and then insert the HP All-in-One Windows

CD. Refer to Section A.

Problem: The Device Setup Has Failed To Complete screen appears.

Action: Verify that the control panel faceplate is ﬁ rmly attached. Unplug the HP All-in-One

and plug it in again. Check all connections. Make sure the USB cable is plugged into

the computer. Do not plug the USB cable into a keyboard or non-powered hub. Refer to

Section A.

ӖӟΙӋกၐॲ

ૉ૞ᛵᇞൕಖᖋ׬٨ٱઌׂࡉࠡהפ౨Δᓮ೶ᔹπࠌشृ

ਐতρࡉᒵՂᎅࣔΖڕᏁࠡהᎅࣔΔᓮោᥦ!

www.hp.com/support!Ζ

b!!ބנ!4x6!૎ٹΰ10x15!ֆ։αऱઌׂΖ

c!! ലઌׂΰ૿ཛՀα࣋ᆜڇੲᑿࣨऱ׳ছֱߡᆵΖᒔ

ࡳઌׂऱ९ᢰऎထੲᑿࣨऱছֱ࣋ړΖᣂՂ።՗Ζ

d !ਊՀψ!໠ۖኇӟ!.!ிՓ!ωਊၨΖ

HP All-in-One!ᄎᐙٱԫٝ଺ࡨઌׂΖ

൞෼ڇբݙګڜᇘΔױאၲࡨࠌش!HP All-in-OneΖ٨ٱԫ່ٝ໛ფऱઌׂΖ

a !ஞנཏຏػ౐Δྥ৵ᇘԵ!4 x 6!૎ٹ

ΰ10x15!ֆ։αऱઌׂ౐Ζലઌׂ౐ऱ٠૿ཛՀΖ

ല౐്ᓳᖞᕴฝ೯ࠩ౐ᦤऱலᢰΖ

ࠌش۟֟!50%!ऱݙ٤ڃگ౐֗۟֟!10%!ऱ٦س౐ٱࠧΖ

*Q7211-90284*

Q7211-90284

*Q7211-90284*

Print a test copy

To learn about printing photos from memory cards and other

features, see the User Guide and online help. For additional

help, see www.hp.com/support .

b Find a 4x6 in (10x15 cm) photo.

c Place the photo (face down) on the right front corner

of the glass. Make sure the long edge of the photo is

along the front of the glass. Close the lid.

d Press the Start Copy Color button.

The HP All-in-One makes a copy of your original photo.

Now that you have ﬁ nished setup, it is time to use your HP All-in-One. Make a copy of a favorite photo.

a Remove the plain white paper and load the

4 x 6 in (10x15 cm) photo paper. Place the paper

glossy side down. Move the paper adjusters next to

the stack of paper.

Printed on at least 50% total recycled ﬁ ber with at least 10% post-consumer paper.

HP PHOTOSMART 2570 User manual

HP PHOTOSMART 2570 User manual

HP PHOTOSMART 2570 User manual

Related papers

Other documents