Wincor Nixdorf BA8x Dual Display Holder Installation guide

Brand: Wincor Nixdorf

Model: BA8x Dual Display Holder

Type: Installation guide

Wincor Nixdorf BA8x Dual Display Holder allows you to connect two screens together - whether to use them as one extended screen or two different ones. BA8x is compatible with various Wincor Nixdorf screens, making it a versatile solution for different setups. With its easy installation process, you can quickly and effortlessly set up your dual-screen configuration. BA8x Dual Display Holder ensures stability and durability, providing a reliable connection between your screens.

BA8x

Doppel Display Halter

Dual Display Holder

Installationsanleitung/Installation Manual

Wincor Nixdorf International GmbH

Documentation RD HWD01

Rohrdamm 7

D-13629 Berlin

E-Mail: retail.documentation@wincor-nixdorf.com

Bestell-Nr./Order No.: 01750209278B

Page is loading ...

Alle in diesem Dokument erwähnten Produktnamen sind Handelsnamen, Marken oder

eingetragene Warenzeichen der jeweiligen Besitzer.

Nachdrucks, Wiedergabe durch Kopieren oder ähnliche Verfahren. Zuwiderhandlungen

verpflichten zu Schadensersatz.

Liefermöglichkeiten und technische Änderungen vorbehalten.

All brand and product names mentioned in this document are trademarks of their

respective owners.

The reproduction, transmission or use of this document or its contents is not permitted without

express authority.

Offenders will be liable for damages. All rights, including rights created by patent grant or

registration of a utility model or design, are reseverd.

Delivery subject to availability; technical modifications possible.

Inhalt /Contents

Einleitung........................................................................................................1

Dual Display-Halter montieren......................................................................2

BA82 an BA83 .................................................................................................3

BA82 an BA82 .................................................................................................7

BA80 an BA83 .................................................................................................8

BA80 an BA82 ...............................................................................................13

Introduction....................................................................................................1

Mounting the Dual Display Holder................................................................2

BA82 on BA83 .................................................................................................3

BA82 on BA82 .................................................................................................7

BA80 on BA83 .................................................................................................8

BA80 on BA82 ...............................................................................................13

Maße/Dimensions (in mm)...........................................................................14

BA83/BA82 ....................................................................................................14

BA83/BA80 ....................................................................................................15

BA82/BA82 ....................................................................................................16

BA82/BA80 ....................................................................................................17

Page is loading ...

BA8x Dual Display Holder 1

Introduction

This manual includes the installations of

 BA82 on BA83,

 BA82 on BA82,

 BA80 on BA83 and

 BA80 on BA82.

Overview of possible combinations:

BA80 BA82 BA83

BA80 - - -

BA82 X X -

BA83 X X -

X= possible

- = unpossible

*Main Display (with foot)

back

In front*

2 BA8x Dual Display Holder

Mounting the Dual Display Holder

Take the dual display holder, the locking bezel, the display holder cover and

the countersunk screws out of the packaging. For the installation you will

need a Phillips screwdriver.

Loosen both screws at the dual display holder (see picture) and put them

aside.

Move the adapter upwards and remove it.

Open the dual display holder at 45°.

BA8x Dual Display Holder 3

BA82 on BA83

Move the cover of the BA82 downwards.

Loosen the four fixing screws and put them aside.

Screw the locking bezel with the provided screws, see the position in the

picture below.

Take the adapter panel and fix it with the four screws at the backside of the

BA82, see arrows.

Locking Bezel

4 BA8x Dual Display Holder

Remove the cover from the backside of the BA83. Loosen the two upper

screws of the foot as shown in the illustration below.

Note: If the screen is not installed on a foot, you have to mount it first (see

User Manual BA83).

Lay the cables of the BA82 through the display holder as shown in the

illustration below.

Screen Plug

BA8x Dual Display Holder 5

Mount the display holder with the four M4 screws to the BA83: First the lower

screws and then through the upper opening (see the figure to the right).

Connect the plug with the connections of the BA82.

6 BA8x Dual Display Holder

Install the BA82 to the BA83 by hinging the screen adapter at the rear side

(see illustration).

Mind that the cables will lie in centre of the holder and that the ferrit is placed

underneath the holder.

Fix the holder to the plate at the rear side of the BA82 with the two M3

screws.

BA8x Dual Display Holder 7

You can close the rear side of the 2

display (here BA82) with an optional

available cable cover. Connect the cables of the 1

display (BA83) and fix

the strain relief of the foot (see User Manual BA82 / BA83). Place the cables

of the BA82 over the strain relief and attach the cable cover of the foot.

Then, you can close the rear side of the 1

display (BA83) with an optional

available cable cover.

Arrange both displays so that you can attach the holder cover by pushing it

downwards until it snaps into place.

BA82 on BA82

Please follow the instructions given in the previous chapter „BA82 on BA83”.

BA82

BA83

8 BA8x Dual Display Holder

BA80 on BA83

Screw the adapter plate to the rear side of the BA80 (see arrows in the illus-

tration below) with the four screws provided with the delivery.

Remove the cover of the BA83. Loosen the upper screws of the foot

(see arrows).

Note: If the screen is not installed on a foot, you have to mount the screen

first (see User Manual BA83).

BA8x Dual Display Holder 9

Lay the cables of the BA82 through the holder as shown below.

Mount the swivel joint to the BA83 with four M4 screws. First the lower

screws and then through the upper opening (see the figure to the right).

Screen P

lug

10 BA8x Dual Display Holder

Remove the cover at the rear side.

Connect the plug with the connections of the BA80.

BA8x Dual Display Holder 11

Install the BA80 to the BA83 by hinging the screen adapter at the rear side

(see illustration).

Mind that the cables will lie in centre of the holder and that the ferrit is placed

underneath the holder.

Fix the holder to the plate at the rear side of the BA80 with the two M3

screws.

12 BA8x Dual Display Holder

Connect the cables of the 1. Display (BA83) and lay the cables into the strain

relief of the foot (see illustration).

Attach the cable cover of the foot. You can close the rear side of the BA83

with an optional available cable cover.

Arrange both displays so that you can attach the holder cover by pushing it

downwards until it snaps into place.

Install the cable cover to the 2. Display (here BA80).

BA80

BA83

BA80 BA83

BA8x Dual Display Holder 13

BA80 on BA82

Please follow the instructions given in the previous chapter „BA80 on BA83”.

14 BA8x Dual Display Holder

Maße/Dimensions (in mm)

BA83/BA82

176,4

350,6

5°

206,1

351,8

69,2

59,2

331,3

231,1

35°

BA8x Dual Display Holder 15

BA83/BA80

145,9

350,6

206,1

300,7

109,5

308

331,3

16 BA8x Dual Display Holder

BA82/BA82

175,1

303,9

206,1

350,6

69,2

359,2

292,4

231,1

Page is loading ...

Wincor Nixdorf BA8x Dual Display Holder Installation guide

Brand: Wincor Nixdorf

Model: BA8x Dual Display Holder

Type: Installation guide

Download PDF

report

in other languages

Deutsch: Wincor Nixdorf BA8x Dual Display Holder Installationsanleitung

Wincor Nixdorf BA8x Dual Display Holder Installation guide

Wincor Nixdorf BA8x Dual Display Holder Installation guide

in other languages

Related papers

Other documents