Acnodes FES7470 User manual

Type
User manual

This manual is also suitable for

Acnodes FES7470 is an expandable fanless embedded computer featuring a powerful Intel Xeon/Core i processor, DDR4 memory, and multiple I/O interfaces. With configurable PCI/PCIe slots, it offers a flexible platform for integrating off-the-shelf expansion cards. Ideal for industrial automation, digital signage, and other demanding applications, the FES7470 delivers reliable performance in harsh environments.

Acnodes FES7470 is an expandable fanless embedded computer featuring a powerful Intel Xeon/Core i processor, DDR4 memory, and multiple I/O interfaces. With configurable PCI/PCIe slots, it offers a flexible platform for integrating off-the-shelf expansion cards. Ideal for industrial automation, digital signage, and other demanding applications, the FES7470 delivers reliable performance in harsh environments.

All rights reserved. Product description and product specifications are subject to change without notice.
For lastest product information, please v isit Acnodes’ website at www.acnodes.com
146
28 Central Ave. Chino, CA 91710
Tel: 909.597.7588 Fax: 909.597.1939
© C opyright 2017 Acnodes C orp.
Copyright
The documentation and the software included with this product are copyrighted 2017
by Acnodes. All rights are reserved. Acnodes reserves the right to make
improvements in the products described in this manual at any time without notice. No
part of this manual may be reproduced, copied, translated or transmitted in any form
or by any means without the prior written permission of Acnodes. Information provided
in this manual is intended to be accurate and reliable. However, Acnodes assumes no
responsibility for its use, nor for any infringements of the rights of third parties, which
may result from its use.
Acknowledgements
Intel and Pentium are trademarks of Intel Corporatio
n.
Microsoft Windows and MS-DOS are registered trademarks of Microsoft Corp.
All other product names or trademarks are properties of their respective owners.
Safety Instructions
1. Read these safety instructions carefully.
2. Keep this User Manual for later reference.
3. Disconnect this equipment from any AC outlet before cleaning. Use a damp cloth.
Do not use liquid or spray detergents for cleaning.
4. For plug-in equipment, the power outlet socket must be located near the
equipment and must be easily accessible.
5. Keep this equipment away from humidity.
6. Put this equipment on a reliable surface during installation. Dropping it or letting it
fall may cause damage.
7. The openings on the enclosure are for air convection. Protect the equipment
from overheating. DO NOT COVER THE OPENINGS.
8. Make sure the voltage of the power source is correct before connecting the
equipment to the power outlet.
9. Position the power cord so that people cannot step on it. Do not place anything
over the power cord.
10. All cautions and warnings on the equipment should be noted.
11. If the equipment is not used for a long time, disconnect it from the power source
to avoid damage by transient overvoltage.
12. Never pour any liquid into an opening. This may cause fire or electrical shock.
13. Never open the equipment. For safety reasons, the equipment should be opened
only by qualified service personnel.
If one of the following situations arises, get the equipment checked by service
personnel:
The power cord or plug is damaged.
Liquid has penetrated into the equipment.
The equipment has been exposed to moisture.
The equipment does not work well, or you cannot get it to work according to
the user's manual.
The equipment has been dropped and damaged.
The equipment has obvious signs of breakage.
14. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT WHERE
THESTORAGE TEMPERATURE MAY GO BELOW -20° C (-4° F) OR ABOVE
55° C(131° F). THIS COULD DAMAGE THE EQUIPMENT. THE EQUIPMENT
SHOULD BE IN A CONTROLLED ENVIRONMENT.
15. CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY
REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE
RECOMMENDED BY THE MANUFACTURER, DISCARD USED BATTERIES
ACCORDING TO THE MANUFACTURER'S INSTRUCTIONS.
Safety Precaution - Static Electricity
Follow these simple precautions to protect yourself
from harm and the products from
damage.
To avoid electrical shock, always disconnect the power from your PC chassis
before you work on it. Don't touch any components on the CPU card or other
cards while the PC is on.
Disconnect power before making any configuration changes. The sudden rush
of power as you connect a jumper or install a card may damage sensitive
electronic components.
Contents
Chapter 1: General Introduction.................................................................................1
1.1 Overview..............................................................................................1
1.2 Key Features....................................................................................2
1.3 Hardware Specification...............................................................3
1.4 I/O Arrangement...........................................................................5
1.5 Mechanical Dimension....................................................................10
Chapter 2: System Setup ................................................................12
2.1 Power Installation Procedure....................................................11
2.2 Installing 2.5" HDD..................................................................13
2.3 Installing Wall-mount Bracket..................................................15
2.4 Installing Memory and Internal Expansion Device...................16
2.5 Installing PCI/PCIe Expansion Card..........................................17
2.6 com3-4 setting ( RS232/422/485)..........................................18
C h a p te r 3 : B I O S S et u p . . . . .. . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 9
3.1 Main Setup..........................................................................20
3.2 Advanced BIOS Features Setup.............................................21
3.2.1 PCI Subsystem Settings...............................................22
3.2.2 ACPI Settings................................................................23
3.2.3 Trust Computing..........................................................23
3.2.4 S5 RTC Wake Setting.......................................................24
3.2.5 CPU Configuration.......................................................25
3.2.6 PCH-FW Configuration....................................................27
3.2.7 AMT Configuration........................................................28
3.2.8 USB Configuration.........................................................29
3.2.9 Smart Setting.................................................................30
3.2.10 Platform Misc Configuration...........................................31
3.2.11 Super IO C onfiguration.............................................32
3.2.12 H/W Monitor............................................................33
3.3 Chipset....... .... .................. ........ ..... .... ................................34
3.3.1 PCH-IO Configuratio n...................................................35
3.3.2 PCI Express Confi guratio n...........................................36
3.3.3 SATA Configuration.....................................................37
3.3.4 USB Configuration.........................................................37
3.3.5 System Agent (SA) Configuration...................................38
3.3.6 Graphics Configuration...................................................39
3.4 Boot........................................................................................41
3.5 Security.....................................................................................42
3.6 Save & Exit..........................................................................................43
3.1 Main Menu...........................................................................17
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. 1 8
3.3 Chipset Menu...........................................................................28
3.4 Security Menu.............................................................................32
3.5 Boot Menu.............................................................................34
3.6 Exit Menu....... ................. ... ........... . . ....... . ........ ....................
P
age 1
Chapter1. General Introduction
1.1 Overview
Acnodes FES741X Series is an exceptional fan base ex
pandable embedded
computer with configurable PCIe/PCI slots. It is designed to provide a reliable
platform for a wide variety of applications by accepting standard PCI cards. The
FES741X Series can operate in -20 to 55° C temperatures and its cableless
structure provides additional durability for long-term usage. Featuring an Intel®
Xeon / Core™ i processor, the FES741X Series delivers exceptional performance
at low power. The PCIe/PCI slots enable integration of off-the-shelf PCIe/PCI
cards for a configurable application platform. Generic I/O interfaces, such as
Gigabit Ethernet, COM port, and USB are also provided for connecting devices.
Acnodes FES741X Series is the perfect combination of configurability, reliability,
durability, and compactness. With the FES741X Series creating your rugged
application system has never been easier.
( Front Cover/IO Cover )
P
age 2
( Heat sink )
1
.2 Key Features
Expandable Fanbase Box PC, Intel® Xeon / Core™ i Processor
DDR4 2133 MHz SODIMM up to 32 GB
1 DVI-D(option), 1 DP (option), 4 COM, 2 GbE, 5 USB 3.0,
Internal Expansion slot:
(FES7470) 3 PCI/1PCIe x16 / (FES7471) 1 PCIex8/2 PCIex4/1 PCIex1.
250W AC Power Input
-20 ~ 55° C Operating Temperature
Pa
ge 3
1.3 Hardware Specification
Model FES7470 / FES7471
Processor
System
CPU Intel Xeon E3 1200v5 series, 6th/7th Gen Core™
i7/i5 Processor,
System Chipset (FES7470) H110 (FES7471) C236
BIOS A
MI 128Mbit SPI Flash
Memory Technology (FES7470) D
ual channel DDR4 2133 MHz (Non-ECC) SDRAM
(FES7471) Dual channel DDR4 2133 MHz (ECC) SDRAM
Max. Capacity 32 GB, (8 GB per DIMM)
Socket 2
, 260-pin SO-DIMM
Display Graphics Engine Intel® HD Graphics embedded in the processor
VGA C
RT, up to 1920 x 1200 pixel at 60Hz
DVI-D(Option) DVI-D, up to 1920 x 1200 pixel at 60Hz(option)
DP (Option) DP, up to 4096 x 2304 pixel at 60Hz(option)
I/O Interface USB 5
USB 3.0
Serial Port 2 COM ports (RS-232), 2 COM ports (RS-232/422/485)
PS/2 1
(PS/2 Y cable supports 1keyboard and 1 mouse)
Ethernet Controller Dual GbE, 10/100/1000 Mbps (LAN 1: Intel i219LM,LAN 2:
I
ntel i211AT)
Expansion PCIe (
FES7470) 3 PCI / 1 PCIe x16
(FES7471) 1 PCIe x8 / 2 PCIe x4 / 1 PCIe x1
Storage SATA 2
SATA 3.0(600MB/sec)
Power Power Type AT /ATX
Power Supply
Voltage
1
00-240V AC, 4-2A, 60-50Hz, 250W
Thermal
Dissipation
F
an base
Environment Operational Temp -20~55° C (-4~131° F)
Non-Operational -30~70° C (-22~158° F)
Vibration Operating : MIL-STD-810G, Method 514.6, Category 4,
common carrier US highway truck vibration exposure
Storage : MIL-STD-810G, Method 514.6, Category 24,
minimum integrity test
Certification Shock Operating : MIL-STD-810G, Method 516.6, Procedure I,
functional shock=20g Storage : MIL-STD-810G, Method
P
age 4
516.6, Procedure V, crash hazard shock test=75g
EMC CE, FCC, Class A
General Dimensions
(W x H x D)
183.5 x 236.4 x 238.7 mm (7.34” x 9.31” x 9.54”)
Weight 5.22 kg (11.48Ib)
OS Windows 7 Pro, Windows 8.1 Pro, Windows 10, Linux
P
age 5
1.4 I/O Arrangement
Power Button
USB 3.0
USB 3.0 Ports
GbE LAN Ports
COM 1-2
(RS
-
232)
VGA Port
PS/2 Port
COM 3-4
(RS232/RS422/485)
(Optional)
PCIe Expansion
Slots for 3 PCI
&1 PCIe x16 or
1 PCIex8 &
2 PCIex4 &
1 PCIex1
DVI-D (Option)
HDD Kit
P
age 6
Power Button
Press this button to turn on the system.
PS/2 Port
This port can be connected to keyboard or mouse .
VGA Port
1. This CPU card has VGA outputs that can drive conventional CRT displays.
VGA1 is a standard 15-pin D-SUB connector commonly used for VGA.
DVI Port
supporting resolution up to 1920 x 1200.
LAN Port
This port can be connected to the Ethernet via RJ-45 connector .
Power Button
Power Button
P
age 7
10/100BASE-T:
Pin Definition Pin Definition
1 TX_D0+ 5 NC
2 TX_D0- 6 RX_D1-
3 RX_D1+ 7 NC
4 NC 8 NC
1000BASE-T:
Pin Definition Pin Definition
1 TX_D0+ 5 BI_D2-
2 TX_D0- 6 RX_D1-
3 RX_D1+ 7 BI_D3+
4 BI_D2+ 8 BI_D3-
USB 3.0 Port
Pin Definition
1 +5
2 USB-
3 USB+
P
age 8
B
asically, USB3.0 supports 900mA @ 5 V
USB 2.0 Port
Pin Definition
1 +5
2 USB-
3 USB+
4 GND
Each USB2.0 port supports 500mA @ 5 V
COM 1-2 (RS-232 only)
Pin Definition Pin Definition
1 DCD 6 DSR
2 RXD 7 RTS
3 TXD 8 CTS
4 DTR 9 RI
5 GND
4 GND
5 StdA_SSRX-
6 StdA_SSRX+
7 GND_DRAIN
8 StdA_SSTX-
9 StdA_SSTX+
P
age 9
COM 3-4 ,COM 7-8 (RS-232/422/485)
(RS-232)
Pin Definition Pin Definition
1 DCD 6 DSR
2 RXD 7 RTS
3 TXD 8 CTS
4 DTR 9 RI/5V/12V
5 GND
(RS-422)
Pin Definition Pin Definition
1 TX- 6
2 TX+ 7
3 RX+ 8
4 RX- 9 5V/12
5 GND
(RS-485)
Pin Definition Pin Definition
1 D- 6
2 D+ 7
3 8
4 9 5V/12
5 GND
*Comport Setting refer to the "2.6 COM3-4 Setting (RS232/422/485)"
AC Power Input Connector
This System supports AC 110-240V input power voltage.
P
age 10
1.5 Mechanical Dimension
P
age 11
P
age 12
Chapter2. System Setup
2.1 Power Installation Procedure
Step 1. Connect a power cord to the power supply.
AC to DC power adaptor specification
1. Input support voltage: 110V ~ 240V AC power , 50~60Hz
2. Output support voltage: 12V DC power @18A MAX
3. -20~55 degree C operating temperature
Step 2. Connect another male plug of the power cord to an electrical outlet.
P
age 13
2.2 Installing 2.5" HDD of the Kit
Step 1. Push the dowel in the direction of the arrow,and pull out hdd bracket
P
age 14
Step 2. Install a HDD and then fasten the 4 M3*5 screws.
Step3. Put in the HDD and lock it
Notice that the bracket supports only 7mm and 9mm HDD/SSD.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50

Acnodes FES7470 User manual

Type
User manual
This manual is also suitable for

Acnodes FES7470 is an expandable fanless embedded computer featuring a powerful Intel Xeon/Core i processor, DDR4 memory, and multiple I/O interfaces. With configurable PCI/PCIe slots, it offers a flexible platform for integrating off-the-shelf expansion cards. Ideal for industrial automation, digital signage, and other demanding applications, the FES7470 delivers reliable performance in harsh environments.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI