Industrial Motherboard
MIX-Q370A1
ii
E15446
First Edition
April 2019
Copyright Notice
This document is copyrighted, 2018. All rights are reserved. The original
manufacturer reserves the right to make improvements to the products described
in this manual at any time without notice.
No part of this manual may be reproduced, copied, translated, or transmitted
in any form or by any means without the prior written permission of the original
manufacturer. Information provided in this manual is intended to be accurate and
reliable. However, the original manufacturer assumes no responsibility for its use,
or for any infringements upon the rights of third parties that may result from its use.
The material in this document is for product information only and is subject to
change without notice. While reasonable efforts have been made in the preparation
of this document to assure its accuracy, the original manufacturer assumes no
liabilities resulting from errors or omissions in this document, or from the use of the
information contained herein.
The original manufacturer reserves the right to make changes in the product
design without notice to its users.
Acknowledgments
All other products’ name or trademarks are properties of their respective owners.
• AMI is a trademark of American Megatrends Inc.
• Intel
®
, Core™ are trademarks of Intel
®
Corporation.
• Microsoft Windows
®
is a registered trademark of Microsoft Corp.
• IBM, PC/AT, PS/2, and VGA are trademarks of International Business
Machines Corporation.
The original manufacturer reserves the right to make changes in the product
design without notice to its users.
All other product names or trademarks are properties of their respective owners.
iii
Contents
Chapter 1: Product overview
1.1 Package contents ......................................................................... 1-1
1.2 Features ........................................................................................ 1-1
1.3 Specications ............................................................................... 1-2
Chapter 2: Motherboard information
2.1 Before you proceed ..................................................................... 2-1
2.2 Motherboard layout ...................................................................... 2-2
2.3 Screw size ..................................................................................... 2-4
2.3.1 Component side .............................................................. 2-4
2.3.2 Solder side ...................................................................... 2-5
2.4 Central Processing Unit (CPU) ................................................... 2-6
2.4.1 Installing the CPU ........................................................... 2-7
2.4.2 CPU heatsink and fan assembly installation ................... 2-9
2.5 System memory ......................................................................... 2-10
2.6 Jumpers ...................................................................................... 2-12
2.7 Connectors ................................................................................. 2-15
2.7.1 Rear panel connectors .................................................. 2-15
2.7.2 Internal connectors ....................................................... 2-17
Chapter 3: BIOS setup
3.1 BIOS setup .................................................................................... 3-1
3.2 Main menu .................................................................................... 3-2
3.2.1 System Date [Day MM/DD/YYYY] .................................. 3-2
3.2.2 System Time [HH:MM:SS] .............................................. 3-2
3.3 Advanced menu ........................................................................... 3-2
3.3.1 CPUConguration .......................................................... 3-3
3.3.2 Trusted Computing ......................................................... 3-3
3.3.3 SATAConguration ........................................................ 3-4
3.3.4 USBConguration .......................................................... 3-4
3.3.5 Hardware Monitor ........................................................... 3-5
3.3.6 SIOConguration ........................................................... 3-7
3.3.7 PCH-FWConguration ................................................... 3-8
3.3.8 Power Management ........................................................ 3-8
3.3.9 DigitalIOPortConguration ........................................... 3-9
iv
3.4 Chipset menu ............................................................................... 3-9
3.4.1 SystemAgent(SA)Conguration ................................... 3-9
3.4.2 PCH-IOConguration ................................................... 3-10
3.5 Security menu ............................................................................ 3-10
3.5.1 Administrator Password ................................................ 3-10
3.5.2 User Password .............................................................. 3-11
3.6 Boot menu .................................................................................. 3-11
3.6.1 BootConguration ........................................................ 3-11
3.6.2 Boot Option Priorities .................................................... 3-11
3.7 Save & Exit menu ....................................................................... 3-12
Appendix
Notices .......................................................................................................A-1
1-1
Chapter 1: General information
1.1 Package contents
Check your industrial motherboard package for the following items.
1 x Industrial Motherboard
1 x SATA 6.0Gb/s cable
1 x I/O Shield
1 x Support CD
If any of the above items is damaged or missing, contact your distributor or
sales representative immediately.
1.2 Features
Your motherboard comes with either 2 or 4 LAN ports.
• Intel
®
Coffe Lake-S LGA1151 socket processor Max. 65W TDPs
• 2 x SO-DIMMs, max. 32GB, DDR4 2666 / 2400 MHz, non-ECC,
memory (Vertical Type)
• Dual channel memory architecture
• 2 x SATA 6.0 Gb/s, 4 x USB 3.1 Gen 2, 4 x USB 2.0
• Realtek
®
ALC887 with Amp
• Multi Display: VGA+HDMI
• 1 x PCIe 3.0 [x16] slot
• 1 x M.2 M key (22 x 80mm) slot for SATA
• Four Ethernet LAN: 1 x Intel
®
PHY i219LM Giga LAN, 3 x Intel
®
i211AT Giga
LAN, RJ45 x 4 or Two Ethernet LAN: 1 x Intel
®
PHY i219LM Giga LAN, 1 x
Intel
®
i211AT Giga LAN, RJ45 x 2
Chapter 1
Product overview
MIX-Q370A1
1-2
1.3 Specications
(continued on the next page)
SYSTEM
CPU
Intel
®
Coffee Lake-S LGA 1151 socket Processor Max. 65W TDPs
Chipset
Intel
®
Q370 Express Chipset
Memory
2 x SO-DIMMs, max. 32 GB, DDR4 2666 / 2400 MHz, non-ECC,
memory (Vertical Type)
Dual channel memory architecture
I/O Chipset
NCT6793D
Ethernet
1 x Intel
®
PHY i219LM Giga LAN
3 x Intel
®
i211AT Giga LAN
OR
1 x Intel
®
PHY i219LM Giga LAN
1 x Intel
®
i211AT Giga LAN
Audio
Realtek
®
ALC887 with Amp
TPM
NPCT650ABBYX TPM2.0 (optional, default: no)
Expansion slots
1 x PCIe 3.0 [x16] slot
1 x M.2 slot (M-key), 22 x 80mm (SATA) @ bottom side
1 x M.2 slot (E-key), 22 x 30mm (support Intel CNVi module)
BIOS
256Mbit Flash ROM, AMI BIOS
H/W Status Monitor
Monitors CPU/chasiss temperature
Monitors Vcore/5V/12V voltages
Monitors CPU/chassis fan speed
Watchdog Timer
1~255 steps by software program
Smart Fan Control
CPU Fan (3.3V/5V PWM control) / Chassis Fan
Wake On LAN / PXE
Yes ( WOL, PXE)
Power States
S3, S4, S5
Graphics
Graphics Multi
Display
VGA+HDMI
Resolution
VGA: Up to 1920 x 1200 @60Hz
HDMI1.4b: Up to 3840 x 2160 @30Hz
Environment, Power, and ME
Battery
Lithium battery
Power requirement
1 x 24-pin ATX connector
1 x 4-pin ATX 12V power connector
Operating
temperature
32
o
F~140
o
F (0
o
C~60
o
C)
Operating humidity
0%~90% relative humidity, non-condensing
Certicate
CE & FCC
Form factor
Mini ITX form factor: 6.7 in. x 6.7 in. (170 mm x 170 mm)
Weight
1.1 lb (0.5 Kg)
1-3
Chapter 1: General information
Back I/O
USB
4 x USB 3.1 Gen 2 ports (4 ports at the Rear I/O)
4 x USB 2.0 ports (2 ports at the Rear I/O, 2 ports at the mid-board)
Display
1 x HDMI port
1 x VGA port
LAN
4 x LAN (RJ-45) ports*
* Your motherboard comes with either 2 or 4 LAN ports.
Audio
2 x Audio jacks: Min-in, Line out
Internal I/O
Storage
2 x SATA 6.0Gb/s ports
1 x M.2 M-Key slot (22 x 80mm, SATA mode) at the bottom side
1 x M.2 E-Key slot (22 x 30mm)
USB
1 x USB 2.0 connector supports additional 2 USB ports
Serial port
2 x boxer headers for COM (COM1: RS-232/422/485 supports 5V/12V/RI,
COM2: RS-232)
DIO
1 x 8-bit Digital I/O box header (4-in / 4-out)
Fan
1 x CPU Fan connector (4-pin)
1 x Chassis Fan connectors (4-pin)
Power
1 x 24-pin EATX power header
1 x 4-pin ATX 12V power connector
Others
1 x Front panel header
1xSpeakerfor2W/4Ω
1 x Chassis Intrusion following ASUS pin out
1 x Buzzer on board
1 x AT/ATX mode select jumper (default: No)
1 x Clear CMOS jumper
Others
OS support
Windows
®
10 64-bit
Ubuntu 18.04.1
Accessories
1 x SATA 6.0Gb/s cable
1 x I/O shield
1 x Support DVD
NOTE: Specicationsaresubjecttochangewithoutnotice.
MIX-Q370A1
1-4
2-1
Chapter 2: Motherboard information
Chapter 2
Motherboard information
2.1 Before you proceed
Take note of the following precautions before you install motherboard components
or change any motherboard settings.
CAUTION!
• Unplugthepowercordfromthewallsocketbeforetouchingany
component.
• Beforehandlingcomponents,useagroundedwriststraportouchasafely
groundedobjectorametalobject,suchasthepowersupplycase,toavoid
damaging them due to static electricity.
• HoldcomponentsbytheedgestoavoidtouchingtheICsonthem.
• Wheneveryouuninstallanycomponent,placeitonagroundedantistatic
pad or in the bag that came with the component.
• Beforeyouinstallorremoveanycomponent,ensurethattheATXpower
supply is switched off or the power cord is detached from the power
supply.Failuretodosomaycauseseveredamagetothemotherboard,
peripherals,orcomponents.
MIX-Q370A1
2-2
2.2 Motherboard layout
Place this side
towards the rear
of the chassis
NOTE: Place four screws into the holes indicated by circles to secure the
motherboard to the chassis.
CAUTION!Donotovertightenthescrews!Doingsocandamagethe
motherboard.
MIX-Q370A1
EATX_PWR3
EATX_PWR2
LAN2_USB3_34
LAN1_USB3_12
LAN34
USB56
HDMI2
VGA
CLRTC1
ATX_AT
USB78
17.0cm(6.7in)
17.0cm(6.7in)
SATA6G_1SATA6G_2
CHASSIS
CHA_FAN1
CPU_FAN1
F_PANEL
DDR4 SO-DIMM_A1 (64bit, 260-pin module)
DDR4 SO-DIMM_B1 (64bit, 260-pin module)
J1 J3
J4J2
DIO
COM2 COM1
COM_V1
BOTTOM:M2_TYPE_M1
M2_TYPE_E1
211AT
211AT
211AT
219LM
BZ1
ALC
887
Intel
®
Q370
Super
I/O
SPI_1
LGA1151
AMP_CON
AAFP
BATTERY_H
2230
2280
LED_+5V
LED_+5VSB
PCIEX16_2
AUDIO1
1
6
5
8
7
9
1
1516 14 13 101112
3
19
1718
32 4
NOTE:Yourmotherboardcomeswitheither2or4LANports.
2-3
Chapter 2: Motherboard information
Connectors/Jumpers/Slots
Page
1.
ATXpowerconnectors(24-pinEATXPWR2,4-pinEATX_PWR3) 2-17
2.
Intel
®
LGA1151CPUsocket 2-6
3.
CPUandchassisfanconnectors(4-pinCPU_FAN1,4-pinCHA_FAN1) 2-18
4.
DDR4SO-DIMMslots 2-10
5.
BIOSprogrammableconnector(8-pinSPI_1) 2-19
6.
SerialATA6.0Gb/sconnectors(7-pinSATA6G_1~2) 2-18
7.
ClearRTCRAM(3-pinCLRTC1) 2-12
8.
USB2.0connector(10-pinUSB78) 2-19
9.
Systempanelconnector(10-1pinF_PANEL) 2-20
10.
Chassisintrusionjumper(4-1pinCHASSIS) 2-14
11.
AT/ATXmodeselection(3-pinATX_AT) 2-14
12.
COM1operatingmodeselectionjumpers(2-pinJ1/J2/J3/J4) 2-13
13.
DigitalI/Oconnector(10-pinDIO) 2-22
14.
COM1Ring/+5V/+12Vselectionjumper(6-pinCOM_V1) 2-13
15.
Serialportconnectors(10-pinCOM1~2) 2-21
16. Batteryconnector(2-pinBATTERY_H) 2-20
17. Frontpanelaudioconnector(10-1pinAAFP) 2-23
18. Speakeroutconnector(4-pinAMP_CON) 2-17
19. M.2E-keyandM-Keyslots 2-22
MIX-Q370A1
2-4
2.3 Screw size
2.3.1 Component side
NOTE:Yourmotherboardcomeswitheither2or4LANports.
2-5
Chapter 2: Motherboard information
2.3.2 Solder side
MIX-Q370A1
2-6
2.4 Central Processing Unit (CPU)
ThismotherboardcomeswithanIntel
®
CoffeeLake-SLGA1151socketprocessor.
IMPORTANT:UnplugallpowercablesbeforeinstallingtheCPU.
CAUTION!
• Uponpurchaseofthemotherboard,ensurethatthePnPcapison
thesocketandthesocketcontactsarenotbent.Contactyourretailer
immediatelyifthePnPcapismissing,orifyouseeanydamagetothePnP
cap/socketcontacts/motherboardcomponents.
• Keepthecapafterinstallingthemotherboard.Themanufacturerwill
processReturnMerchandiseAuthorization(RMA)requestsonlyifthe
motherboardcomeswiththecapontheLGA1151socket.
• Theproductwarrantydoesnotcoverdamagetothesocketcontacts
resultingfromincorrectCPUinstallation/removal,ormisplacement/loss/
incorrectremovalofthePnPcap.
MIX-Q370A1
MIX-Q370A1 CPU socket LGA1151
2-7
Chapter 2: Motherboard information
2.4.1 Installing the CPU
1
A
B
2 3
CAUTION! EnsurethatyouinstallthecorrectCPUdesignedforLGA1151only.
DONOTinstallaCPUdesignedforLGA1155andLGA1156socketsonthe
LGA1151socket.
MIX-Q370A1
2-8
A
B
C
4
5
2-9
Chapter 2: Motherboard information
2.4.2 CPU heatsink and fan assembly installation
CAUTION!ApplytheThermal
InterfaceMaterialtotheCPU
heatsinkandCPUbeforeyou
install the heatsink and fan if
necessary.
To install the CPU heatsink and fan assembly
B
A
A
B
1
2
3 4
MIX-Q370A1
2-10
2.5 System memory
ThismotherboardcomeswithtwoDoubleDataRate4(DDR4)SmallOutlineDual
InlineMemoryModules(SO-DIMM)sockets.Thegureillustratesthelocationof
theDDR4DIMMsockets:
To uninstall the CPU heatsink and fan assembly
A
B
B
A
2
1
MIX-Q370A1
MIX-Q370A1 260-pin DDR4 DIMM sockets
DIMM_A1
DIMM_B1
2-11
Chapter 2: Motherboard information
Installing a DIMM
To remove a DIMM
A
B
1
2
3
MIX-Q370A1
2-12
2.6 Jumpers
1. Clear RTC RAM (3-pin CLRTC1)
ThisjumperallowsyoutocleartheRealTimeClock(RTC)RAMinCMOS.
YoucancleartheCMOSmemoryofsystemsetupparametersbyerasing
theCMOSRTCRAMdata.TheonboardbuttoncellbatterypowerstheRAM
datainCMOS,whichincludesystemsetupinformationsuchassystem
passwords.
To erase the RTC RAM:
1. TurnOFFthecomputerandunplugthepowercord.
2. Movethejumpercapfrompins1-2(default)topins2-3.Keepthecapon
pins2-3forabout5~10seconds,thenmovethecapbacktopins1-2.
3. PlugthepowercordandturnONthecomputer.
4. Holddownthe<Del>keyduringthebootprocessandenterBIOSsetup
to reenter data.
CAUTION!ExceptwhenclearingtheRTCRAM,neverremovethecapon
CLRTCjumperdefaultposition.Removingthecapwillcausesystemboot
failure!
NOTES:
• Ifthestepsabovedonothelp,removetheonboardbatteryandmovethe
jumperagaintocleartheCMOSRTCRAMdata.AfterclearingtheCMOS,
reinstall the battery.
• YoudonotneedtocleartheRTCwhenthesystemhangsdueto
overclocking.Forsystemfailureduetooverclocking,usetheCPU
ParameterRecall(C.P.R)feature.Shutdownandrebootthesystemsothe
BIOScanautomaticallyresetparametersettingstodefaultvalues.
MIX-Q370A1
MIX-Q370A1 Clear RTC RAM
1 2
2 3
Protected
(Default)
Clear CMOS
CLRTC1
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
