EverFocus EMV400 Owner's manual

User Manual

E

M

V

4

0

D

V

R

E VERFOCUS ELECTRONICS CORPORATION

EMV400 DVR

Instruction Manual

 2014 EverFocus Electronics Corp

www.everfocus.com

means without written permission of the Everfocus Electronics Corporation.

Release Date: October, 2014

QuickTime is a registered trademark of the Apple Computer, Inc.

Windows is a registered trademark of the Microsoft Corporation.

Linksys is a registered trademark of the Linksys Corporation.

D-Link is a registered trademark of the D-Link Corporation.

DynDNS is a registered trademark of the DynDNS.org Corporation.

Other product and company names mentioned herein may be the trademarks of their respective owners.

ii

Safety Precautions

 Refer all work related to the installation of this product to qualified service personnel or system

installers.

 Do not block the ventilation openings or slots on the cover.

 Do not drop metallic parts through slots. This could permanently damage the appliance. Turn the

power off immediately and contact qualified service personnel for service.

 Do not attempt to disassemble the appliance. To prevent electric shock, do not remove screws or

covers. There are no user-serviceable parts inside. Contact qualified service personnel for

maintenance. Handle the appliance with care. Do not strike or shake, as this may damage the

appliance.

 Do not expose the appliance to water or moisture, nor try to operate it in wet areas. Do take immediate

action if the appliance becomes wet. Turn the power off and refer servicing to qualified service

personnel. Moisture may damage the appliance and also may cause electric shock.

 Do not use strong or abrasive detergents when cleaning the appliance body. Use a dry cloth to clean

the appliance when it is dirty. When the dirt is hard to remove, use a mild detergent and wipe gently.

 Do not overload outlets and extension cords as this may result in a risk of fire or electric shock.

 Do not operate the appliance beyond its specified temperature, humidity or power source ratings. Do

not use the appliance in an extreme environment where high temperature or high humidity exists. Use

the DVR at indoor type temperatures within -20℃~55℃ (-4F~131ºF). The input power source for this

device is 10V~36VDC. (NOTE: This DVR is SAE certified. A power surge of more than 36VDC can

damage this product. Please check that the vehicle’s power system does not deliver voltage values

higher than this.)

 Read Instructions

All the safety and operating instructions should be read before the unit is operated.

 Retain Instructions

The safety and operating instructions should be retained for future reference.

 Heed Warnings

All warnings on the unit and in the operating instructions should be adhered to.

 Follow Instructions

All operating and use instructions should be followed.

 Cleaning

iii

Unplug the unit from the outlet before cleaning. Do not use liquid cleaners, abrasive or aerosol

cleaners. Use a damp cloth for cleaning

 Attachments

Do not use attachments not recommended by the product manufacturer as they may cause hazards.

 Water and Moisture

Do not use this unit near water-for example, near a bath tub, wash bowl, kitchen sink, or laundry tub,

in a wet basement, near a swimming pool, in an unprotected outdoor installation, or any area which is

classified as a wet location.

 Servicing

Do not attempt to service this unit by yourself as opening or removing covers may expose you to

dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

 Power Cord Protection

Power supply cords should be routed so that they are not likely to be walked on or pinched by items

placed upon or against them, playing particular attention to cords and plugs, convenience receptacles,

and the point where they exit from the appliance.

 Object and Liquid Entry

Never push objects of any kind into this unit through openings as they may touch dangerous voltage

points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the

unit.

ATTENTION! This is a class A product which may cause radio interference in a domestic environment; in

this case, the user may be urged to take adequate measures.

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the interference by

one of the following measures :

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance

could void the users’ authority to operate this equipment.

iv

This Product is RoHS compliant.

WEEE

The information in this manual was current upon publication. The manufacturer reserves the right to revise

and improve his products. Therefore, all specifications are subject to change without prior notice.

Manufacturer is not responsible for misprints or typographical errors.

Please read this manual carefully before installing and using this unit. Be sure to keep it handy for later

reference.

v

TABLE OF CONTENTS

1 Product Overview .......................................................................................................... 1

1.1 FEATURES ........................................................................................................................... 1

1.2 PACKAGE CONTENTS ......................................................................................................... 2

1.3 SPECIFICATIONS ................................................................................................................. 3

1.4 FRONT PANEL..................................................................................................................... 5

1.5 REAR PANEL ....................................................................................................................... 6

1.6 SYSTEM CONNECTION ....................................................................................................... 8

1.7 REAR PANEL CONNECTOR ................................................................................................. 9

1.8 INSTALLATION OF EMV400 .............................................................................................. 11

1.9 VIDEO INPUTS/OUTPUTS INSTALLATION ........................................................................ 19

1.10 AUDIO INSTALLATION ................................................................................................... 19

1.11 ALARM CONTACTS INSTALLATION ................................................................................ 19

1.11.1 Alarm Input Contacts ............................................................................................................................. 20

1.11.2 Alarm Output Relay ............................................................................................................................... 20

1.12 USB-Mouse installation ................................................................................................. 20

1.13 NETWORK CONNECTION .............................................................................................. 20

1.13.1 Direct PC Connection through Crossover Network Cable ..................................................................... 21

1.13.2 Network Connection through Patch Cable ............................................................................................ 21

1.14 Final Install Process ....................................................................................................... 22

2 Mouse Operation ......................................................................................................... 23

2.1 General USB Mouse Operation ....................................................................................... 23

2.1.1 How to select a channel ........................................................................................................................ 23

2.1.2 OSD Root Menu ..................................................................................................................................... 23

2.1.3 Field Input Options ................................................................................................................................ 24

3 configuration ............................................................................................................... 25

3.1 Configuration of dvr......................................................................................................... 25

3.2 Login................................................................................................................................. 25

3.3 On Screen Configuration Menu ....................................................................................... 26

3.4 SEARCH ............................................................................................................................ 28

3.4.1 Time Search ........................................................................................................................................... 28

3.4.2 G Sensor Search ..................................................................................................................................... 29

3.4.3 GPS Speed Search .................................................................................................................................. 30

3.4.4 Motion Search ....................................................................................................................................... 32

3.4.5 Event Search .......................................................................................................................................... 33

3.5 ARCHIVE (USB) ................................................................................................................. 35

4 DVR Configuration ....................................................................................................... 36

4.1 Configuration Menu ........................................................................................................ 36

vi

4.2 Camera Setting ................................................................................................................ 38

4.2.1 Normal ................................................................................................................................................... 38

4.2.2 PTZ ......................................................................................................................................................... 39

4.2.3 Video Adjust .......................................................................................................................................... 40

4.2.4 Alarm ..................................................................................................................................................... 41

4.3 Record Setting ................................................................................................................. 42

4.3.1 Record ................................................................................................................................................... 42

4.4 Alarm/GPS ....................................................................................................................... 43

4.4.1 Alarm-Alarm Settings ............................................................................................................................ 43

4.4.2 Alarm-Event Settings ............................................................................................................................. 45

4.4.3 Alarm – Video Loss ................................................................................................................................ 54

4.4.4 Alarm-G-Sensor Settings ....................................................................................................................... 56

4.4.5 Alarm-GPS Speed ................................................................................................................................... 57

4.4.6 Alarm-GPS Event Action ........................................................................................................................ 58

4.4.7 Alarm-GPS Fencing ................................................................................................................................ 59

4.4.8 Motion Setting ....................................................................................................................................... 60

4.5 Date/Time Setting ............................................................................................................ 62

4.5.1 Date/Time Settings ................................................................................................................................ 62

4.5.2 Daylight Saving ...................................................................................................................................... 63

4.6 Display.............................................................................................................................. 64

4.6.1 Title ........................................................................................................................................................ 64

4.6.2 Monitor On Screen Display.................................................................................................................... 65

4.6.3 Layout .................................................................................................................................................... 66

4.6.4 Sequence ............................................................................................................................................... 67

4.7 Network Setting ............................................................................................................... 68

4.7.1 LAN Settings .......................................................................................................................................... 68

4.7.2 Wireless Settings ................................................................................................................................... 71

4.7.3 Mobile Connection Settings .................................................................................................................. 72

4.7.4 Email Settings ........................................................................................................................................ 73

4.7.5 DDNS Settings ........................................................................................................................................ 74

4.7.6 Alarm Server Settings ............................................................................................................................ 76

4.7.7 Meta Server Settings ............................................................................................................................. 77

4.7.8 Network Test ......................................................................................................................................... 79

4.7.9 Remote / Mobile ................................................................................................................................... 80

4.8 SYSTEM ............................................................................................................................ 81

4.8.1 User ....................................................................................................................................................... 81

4.8.2 I/O Control ............................................................................................................................................. 84

4.8.3 DISK Info ................................................................................................................................................ 87

4.8.4 LOG ........................................................................................................................................................ 88

4.8.5 SETTINGS ............................................................................................................................................... 90

4.8.6 SERVICE ................................................................................................................................................. 91

4.9 INFORMATION ................................................................................................................. 92

4.10 PTZ Menu ...................................................................................................................... 93

5 Networking Overview .................................................................................................. 95

5.1 Introduction to TCP/IP ..................................................................................................... 95

5.2 Subnet Masks................................................................................................................... 95

vii

5.3 Gateway Address ............................................................................................................. 95

5.4 Virtual Ports ..................................................................................................................... 96

5.5 Pre-Installation ................................................................................................................ 96

5.6 What is your Network Setup? ......................................................................................... 97

5.7 Simple One to One Connection ....................................................................................... 98

5.8 Direct High Speed Modem Connection ......................................................................... 102

5.9 Router or LAN Connection ............................................................................................. 104

6 REMOTE OPERATION FROM BROWSER ........................................................................... 107

6.1 Connecting to EMV400 .................................................................................................. 107

6.2 Browser Security Setting .................................................................................................... 108

6.2.1 Installing ActiveX controls ................................................................................................................... 108

6.2.2 Enabling ActiveX Controls.................................................................................................................... 110

6.3 Remote Live View .......................................................................................................... 113

6.4 Remote Playback ........................................................................................................... 115

7 EverFocus DDNS Setup ............................................................................................... 116

8 Linksys & D-Link Port Forwarding ............................................................................... 118

8.1 TYPICAL Linksys Port Forwarding................................................................................... 118

8.2 TYPICAL D-Link Port Forwarding .................................................................................... 120

9 Troubleshooting ......................................................................................................... 123

Appendix A: Timing Of Alarm Modes ................................................................................. 124

Appendix B: EXPRESS SETUP RECORDING VALUE SELECTION RULES .................................... 127

AppendiX C: Remote control .............................................................................................. 129

1

1 PRODUCT OVERVIEW

Full featured video surveillance on the move: the EverFocus EMV400 digital video recorder, with H.264

compression technology for enhanced recording capacity and improved network image transmission speed

with high image quality, delivers real-time video and audio recording on all 4 channels (120FPS @ 2CIF/

60fps @ D1 resolution, frame rate and resolution independently configurable for each camera). The DVR

provides multiple interfaces including 3 USB ports, RS-485, RS-232, GPS port, wired and WiFi Ethernet, IR

remote control, 6 alarm inputs and 2 alarm outputs. Video outputs are provided at both front and rear

panels for ease of installation and maintenance, plus the new easy to read graphical user interface is

specially designed for use with portable small-screen monitors. The power supply in the EMV400 provides

voltage regulation, and programmable delay power on/off for the DVR and the system cameras. Added to

this, comprehensive features including hot swap hard drive, embedded 3-axis g-sensor, GPS receiver

interface, 802.11b/g WiFi, individual camera power outputs, remote control capability and shock/vibration

resistant locking Molex connectors make this DVR the best choice for your 1~4 channel portable and

mobile recording applications.

1.1 FEATURES

 4Channels of video and audio recording

 1-DIN car audio size

 Recording Rate : 60fps @ D1 resolution / 120fps @ 2CIF or CIF resolution (with global settings;

record rate, resolution and quality can be set independently per-camera up to the maximum of 240

CIF-equivalent FPS)

 H.264 compression format for efficient disk and network utilization

 Front and rear panel video outputs for easy connection and configuration

 Special Graphical User Interface design for use with mobile small-sized monitors

 Molex connectors for shock & vibration resistance; interface cables to BNC, RCA and power jacks

supplied

 Alarm Inputs & Outputs : 6 & 2 (alarm outputs are form “C”)

 Embedded 3-axis g-sensor function with separate programmable alarm levels for X/Y and Z axis

 Supports single 2.5” SATA hard disk standard (up to 750GB)

 Supports multiple interfaces: 3xUSB , RS-485, RS-232, GPS port, wired Ethernet, IR Remote Control

 Optional wireless 802.11 b/g with diversity antennas

 Provides camera power for 4 cameras; interface cables to power jacks supplied

 Optional External EDGE/GPRS/CDMA/WI-FI Modules for cellular/specialized wireless Transmission

 GPS function tracks speed and geographic limits (optional external GPS receiver)

 Temperature : -20ºC ~ 55ºC (Operating), -20ºC ~ 85ºC (Non-Operating)

Chapter

1

2

 Power Supply : 10V~36VDC with Voltage Regulator, programmable Delay on/off (NOTE: This DVR is

SAE certified. A power surge of more than 36VDC can damage this product. Please check that the

vehicle’s power system does not create voltage values higher than this.)

1.2 PACKAGE CONTENTS

- Digital Video Recorder x1

- HDD Tray x 1

- HDD Fixing Bracket x 1 set

- Screws x 1 pack

- Antenna x 1 set

- IR Remote Control x 1

- Battery x 2

- Camera Power cable x 3

- Video & Audio cable x 3

- Alarm cable x 1

- Alarm Output cable x 1

- RS232/RS485 cable x 1

- GPS cable x 1

- DVR power cord x 1

3

1.3 SPECIFICATIONS

EMV400 - 4CH Mobile DVR

Video Format

NTSC/PAL (auto detected by system)

Operating System

Embedded Linux with special small monitor friendly GUI

Video Input

4 channels (vibration resistant locking Molex connectors – Interface

cables to BNC-F supplied: two groups of 2 cameras each)

Video Output

Main monitor: 1 composite BNC rear panel / 1 front panel RCA

output

Video Compression

H.264

Recording Resolutions

NTSC: 720x480/720x240/360x240

PAL: 720x576/720x288/360x288

Audio Inputs

4 line in (vibration resistant locking Molex connectors - Interface

cables to RCA-F supplied: two groups of 2 cameras each)

Audio Outputs

1 front panel RCA line out

Alarm Inputs

6 alarm inputs (vibration resistant locking Molex connectors -

Interface cables supplied)

Alarm Outputs

2 alarm outputs (form “C”; contacts rated at 30V AC/DC @ 1 amp –

interface cables supplied)

Storage

2.5" HDD x 1(up to 750GB)

Recording Rate

NTSC: D1 60FPS, 2CIF 120f FPS, CIF 240 FPS

PAL: D1 50 FPS, 2CIF 100 FPS, CIF 200 FPS

Per camera resolutions and record rates can be set individually per

camera through the OSD menus up to the maximum record

capacity of 240 NTSC (200 PAL) CIF equivalent FPS

Recording Mode

Continuous recording, event recording, continuous + event

recording

(Rate and resolution in each mode set independently per camera)

Record Quality

Adjustable in five levels per camera per Record Mode

Pre Alarm Recording

Optional; 5 second interval

Playback Rate

NTSC: D1 60 FPS, 2CIF 120 FPS, CIF 240 FPS

PAL: D1 50 FPS, 2CIF 100 FPS, CIF 200 FPS

Playback Search

Time/date, event search

Video Loss Detection

Yes

Event Alarm

Fan failure, hard disk temperature, hard disk failure, hard disk full,

hard disk removed, power loss (after power is restored), network

loss, GPS loss, GPS speed, GPS fencing, G sensor limits

4

Email alert

Multiple email notifications in response to alarms and events.

(Requires real time network connectivity though cellular or WiFi

service).

G Sensor

Embedded 3-axis G Sensor; data recorded; alarm if separate user

limits for X/Y or Z axis exceeded

GPS Function

Optional External GPS Sensor for speed and geographic limit

alarms (rectangular or circular fencing)

Configuration Method

On screen menu with ‘portable monitor friendly’ graphical user

interface

Control/Setup

IR remote control, USB mouse, network I/F

Real time clock

Can be synchronized to GPS/NTP time source; flexible DST

settings

Watchdog Function

Reboots DVR automatically if required

Networking

RJ45 socket, 10/100Mbps; 802.11b/g WiFi with diversity antennas

TCP-IP/DHCP/PPPoE/DDNS/SMTP/SSL/POP3/HTTP/NTP

System Warnings

System fail LED : HDD full, HDD/Sys Temp, Fan fail,

HDD fail LED : HDD power off, HDD failure

File Export

USB 2.0 interface

Interfaces

RS-232 x 2, RS-485, USB x 3, GPS port

Power Source

13.8VDC nominal; 10V~36VDC range (Built in voltage regulation,

programmable Delay On/Off relative to ignition or other switched

voltage) (NOTE: This DVR is SAE certified. A power surge of more

than 36VDC can damage this product. Please check that the

vehicle’s power system does not create voltage values higher than

this.)

Total current 5.5 amps @ 12VDC with 4ch x 450mA cameras

Camera Power Outputs

900mA for camera 1~2 and 900mA for camera 3~4. Vibration

resistant locking Molex connectors – interface cable provided to

coaxial power plugs: 2 X groups of 2 cameras.

Dimensions

DVR alone : 178 x 50 x 199mm / 7”x 2”x 7.8”(1-DIN size)

DVR in mount with antennas 272 x 145 x 224mm / 10.7”x 5.7”x

8.8”

Weight

DVR without mount 1.7kg / 3.75lbs.

DVR with mount 2.15kg / 4.74lbs

Operating Temp.

Working Temperature: -20℃~55℃; -4F~131ºF

Storage Temperature: -20℃~85℃; -4F~185ºF

5

1.4 FRONT PANEL

Your primary interaction with your new DVR will be through the Front Panel buttons and their

corresponding buttons on the included IR Remote Control. Take a moment to learn where the keys are as

the remainder of the manual will refer to them often.

Figure 1-1 Front Panel

1) USB 2.0: For connecting USB-Flash-Drive to copy/archive video or for firmware upgrades.

2) Audio Out: Connect to the line level input of an audio amplifier (same output as the audio out at rear

panel, no conflict between these 2 outputs, they both can be connected simultaneously).

3) Main Monitor Out: Main monitor for live and playback display and on-screen display. (same output as

the main monitor out at rear panel, no conflict between these 2 outputs, they both can be

connected simultaneously).

4) System Status LEDs: Indicators system status.

System fail LED: HDD full, HDD/System Temperature, Fan fail

HDD fail LED: HDD power off, HDD failure

Copy: This LED ON indicates system is archiving data.

LAN: This LED ON indicates Network active. Network LED turns on depending on the network type

(LAN, Wireless or Mobile) set in Network setting.

Record: This LED ON indicates Record active.

Power: This LED ON indicates Power on.

6

1.5 REAR PANEL

During initial setup you will be connecting your DVR to multiple input and output devices. This is done

through the rear panel.

Figure 1-2 Rear Panel

○

1

Power Input/Ignition Control In/Switched power out: 4 pins are reserved for power input; connect to

10V~36VDC power source (NOTE: This DVR is SAE certified. A power surge of more than 36VDC can

damage this product. Please check that the vehicle’s power system does not create voltage values

higher than this.). 1 pin is for ignition control; connect to the other vehicle devices to avoid excess

power consumption at ignition. 1 pin is reserved for switched power out. The power source used for

this additional power output is 600 mA x 12VDC.

○

2

Video & Audio Inputs (4): Connect camera’s video output or other composite video source to the video

input connection.

Connect line level output of an audio preamplifier to the audio input connection corresponding to the

appropriate camera.

○

3

Camera Power Outputs (4): EMV400 can provide power source to the cameras, connect camera

power to this output by using the camera power cable. The power source used is 450mA x 12VDC.

7

○

4

GPS Data Input: Connect this connector to GPS receiver via GPS cable.

○

5

Network Connector: RJ-45 network connection 10/100Mbps Ethernet. There are two LEDs on the

LAN jack; Green LED means network is connected, amber LED flickers when data is

being exchanged.

○

6

USB port: USB port recommended for connecting the USB mouse.

○

7

RS232 socket: Connect this connector to RS232 compatible device.

○

8

Main Monitor Out: Main monitor for live and playback display and on-screen display. (same output as

the main monitor out at front panel, no conflict between these 2 outputs, they both can be

connected simultaneously)

○

9

Alarm Input: Connect up to 4 alarm inputs, selectable between N.O./N.C. contacts.

○

10

Alarm Output: N.C or N.O type alarm out (form “C”).

○

11

Event Input: Reserved port.

○

12

RS485 Input: For remote control via RS-485 keyboards and telemetry control for attached PTZ devices.

○

13

802.11 b / g WiFi: Connection of the antenna.

8

1.6 SYSTEM CONNECTION

Please refer to the following diagrams for the system connections.

Note: Monitor and Camera must be purchased separately.

9

1.7 REAR PANEL CONNECTOR

RS485

485+

485-

GND

RS232

TX2

RX2

GND

TX1

RX1

GND

ALARM IN

ALARM IN1

ALARM IN2

ALARM IN3

ALARM IN4

ALARM IN5

ALARM IN6

GND

ALARM

OUT

NO2

COM2

NC2

NO1

COM1

NC1

VIDEO/AUDIO IN1

VIDEO IN1

VIDEO IN2

VIDEO IN3

VIDEO IN4

GND

POWER

IGN

GND

12V

10

VIDEO/AUDIO IN2

VIDEO IN1

VIDEO IN2

VIDEO IN3

VIDEO IN4

GND

CAM POWER1

12V OUT

GND

GPS

GND

GPS_TX

GPS_RX

+

5V

CAM POWER2

12V OUT

GND

11

1.8 INSTALLATION OF EMV400

 The DVR can be mounted horizontally (suspend or support mounted).

 Show all the possible ways to mount the DVR.

Use the two Z-brackets supplied to mount it in any ways shown.

Support

Suspend

Interface

Support

Suspend

EDSR40

EDSR400M

Support

12

Hard Disk Drive Installation

1. Make sure the mobile DVR is power-off, and unlock the HDD tray using the supplied key.

2. Press the Release Latch to the right, and the Locking Arm will pop up.

Release Latch

Locking Arm

3. Gently pull the Locking Arm to take out the HDD Tray.

HDD Tray

Page is loading ...

EverFocus EMV400 Owner's manual

Related papers

Other documents