GE JP961BHBB Specification

GE
Brand
GE
Model
JP961BHBB
Category
Cookers
Type
Specification

This manual is also suitable for

GE JP961BHBB, a 36" Built-In CleanDesign Cooktop, offers a seamless cooking experience with its smooth ceramic glass surface and powerful ribbon heating elements. Choose between 6" or 9" and 5" or 8" heating elements to accommodate various pan sizes. Upfront controls with a digital clock and easy-to-read graphics ensure convenient operation. Hot surface indicator lights add safety and convenience.

GE JP961BHBB, a 36" Built-In CleanDesign Cooktop, offers a seamless cooking experience with its smooth ceramic glass surface and powerful ribbon heating elements. Choose between 6" or 9" and 5" or 8" heating elements to accommodate various pan sizes. Upfront controls with a digital clock and easy-to-read graphics ensure convenient operation. Hot surface indicator lights add safety and convenience.

TM
Specification Created 1/03
JP961BH/KH/SH/TH – GE Profile
™
36" Built-In CleanDesign Cooktop
Cabinet Installation Dimensions (in inches)
KW Rating
240V 9.6
208V 7.2
Breaker Size
240V 40 Amps
†
208V 40 Amps
†
R
Listed by
Underwriters
Laboratories
For answers to your Monogram,
®
GE Profile
™
or
GE appliance questions, visit our website at
GEAppliances.com or call
GE Answer Center
®
service, 800.626.2000.
Flush Mount Installation Kit
Accommodates both 30" and 36" installations. Not for use with stainless steel models.
JXFLMTWW (True White)
JXFLMCC (True Bisque)
JXFLMBB (Black – use with black glass cooktops with a white, bisque or black pattern)
Installation Information:
Before installing, consult installation instructions packed with product for current
dimensional data.
†
Note: Check local codes for required breaker size.
Built-In CleanDesign Cooktops
Requires a 5" free area between the bottom of the cooktop to any combustible material, i.e.,
shelving. Free area not required when installing wall oven underneath cooktop. Refer to installation
instructions. Requires an 18" minimum from cooktop to adjacent overhead cabinets. Units
are furnished with a 48" flexible armored cable.
36" Ribbon cooktops are approved for use over GE 30" Single Wall Ovens and warming drawers.
Refer to cooktop and wall oven installation instructions packed with product for current
dimensional data.
Notes: If installing with a GE ProfileTelescopic Downdraft System, consult both cooktop
and downdraft installation instructions packed with product before installing. Cooktop
gas/electric supply may need to be re-routed to install downdraft.
The countertop must be at least 26" deep with a flat surface area of 23-1/2" or more, front to
back. In addition, other clearances to the front edge of the countertop must be considered.
Note: Consult cabinet and countertop manufacturer’s specs for flush mount installation
prior to install.
Electrical junction
box 16" MIN.
below countertop
30" MIN. to
unprotected
cabinet
Cut should not interfere
with cabinet structure
at front
1-3/4" MIN.
clearance to
side wall
from cut-out
1-1/2" MIN.
clearance to
side wall
from cut-out
18" MIN.
to cabinet
1-3/4" to
rear wall
13" MAX.
depth
3-1/4"*
Cooktop
2-1/2"
Required
33-7/8"
19-1/8"
36"**
20-3/8"**
**Depth of unit at conduit connection location (rear) is 4-5/8".
**Width and Depth of stainless model is 36-1/8" and 21".
TM
Specification Created 1/03
JP961BH/KH/SH/TH – GE Profile
™
36" Built-In CleanDesign Cooktop
Features and Benefits
• Ceramic Glass Cooktop – A smooth cooktop surface makes cleaning quick and easy.
• Ribbon Heating Elements – Provides powerful heat beneath the smooth glass surface to
ensure even heat and fast warm-up times.
• Dual Size Ribbon Elements – Offers a convenient choice of using a 6" or 9" on one
and a 5" or 8" on the other heating element, depending on the size of the pan.
• Frameless Design – A smooth and seamless cooktop surface makes cleaning quick
and easy.
• Upfront Controls – Combines a digital clock and large-easy-to-read graphics for
convenient operation and an attractive appearance.
• Hot Surface Indicator Lights – Illuminates when the cooking surface is active and hot,
adding convenience and safe caution.
• Model JP961KHCC – True Bisque
• Model JP961BHBB – Black on black
• Model JP961SHSS – Stainless steel
• Model JP961THWW – True White
  • Page 1 1
  • Page 2 2

GE JP961BHBB Specification

GE
Brand
GE
Model
JP961BHBB
Category
Cookers
Type
Specification
This manual is also suitable for

GE JP961BHBB, a 36" Built-In CleanDesign Cooktop, offers a seamless cooking experience with its smooth ceramic glass surface and powerful ribbon heating elements. Choose between 6" or 9" and 5" or 8" heating elements to accommodate various pan sizes. Upfront controls with a digital clock and easy-to-read graphics ensure convenient operation. Hot surface indicator lights add safety and convenience.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents