Instruction Manual
2.2ch Soundbar with 2 x Built-in Subwoofers - BPSB21DW1
General Safety Instructions 4
Remote Control 7
Product Overview 9
Controls and Connections 10
First Time Setup 11
General Operations 12
Pairing your soundbar 13
Troubleshooting 14
Specifications 15
Support Last Page
CONTENTS
4
Read this manual thoroughly before you start using the Soundbar.
Store this manual, the completed warranty card, your receipt and the product packaging.
The safety precautions instructions reduces the risk of fire, electric shock and injury when
correctly complied to.
Please follow all instructions and take notice of all warnings.
• Only using furniture that can safely support the Products.
• Ensure the Product is not overhanging the edge of the supporting furniture.
• Do not place the product on a high furniture without securing both the furniture
and the product to a stable support.
• Do not place the product on cloth or other conductive materials.
• Warn children of the dangers of climbing on furniture to reach the soundbar
or its controls and to call for an adult to assist.
• Do not expose this product to rain or moisture as it may result in fire or an
electric shock hazard
• Do not temper or change or modify the product in any way.
• Only use Accessories outlined and recommended by the manufacturer.
• Please do not expose the product to splashing or water contact
• Please do not place any object on top of the product
IMPORTANT INFORMATION
GENERAL SAFETY INSTRUCTIONS
5
Please follow instruction when installing this product in accordance with the
instruction manual. This product must be positioned in a suciently stable
location, it can be potentially hazardous due to falling when mounted and can
cause injury, particularly to children if it positioned incorrectly.
• Before installing this Soundbar, make sure your outlet voltage corresponds to the
voltage stated on the product rating label
• The apparatus shall not be exposed to dripping or splashing and no objects filled
with liquids, such as vases, shall be placed on the product. Dry location use only.
• No naked flame source, such as candles, should be placed on the product.
• Ventilation should not be impeded by covering the ventilation openings.
• Do not plug several devices into the same outlet. Doing so may cause the outlet
to overheat and start a fire. Make sure the outlet is readily accessible during
operation of the equipment.
• No naked flame source, such as candles, should be placed on the product.
• Unplug the Soundbar during lightning storms or when unused for long periods of
time. Not doing so may result in fire or electric shock.
• Do not cover the ventilation openings of the product with items such as
newspapers, tablecloths, curtains etc. Do not insert objects into the slots
available on the products. As this could result in the product being damaged and
could cause a fire.
GENERAL SAFETY INSTRUCTIONS (Cont.)
6
GENERAL SAFETY INSTRUCTIONS (Cont.)
• If you notice any unusual odors or smoke around the unit, immediately disconnect the
unit from the outlet and contact the service center. Failure to do so may result in fire
or electric shock.
• When not using the unit for long periods of time or when you are moving the unit
please ensure to disconnect the power supply from the wall socket.
• Please beware that dust could accumulate over time on the unit and cause it to generate
heat and or deteriorate insulation, which in turn may result in an electrical fire.
• The product is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or young children of any age, They must be supervised
product by a person responsible for their safety.
• Batteries from the remote control must be only removed by an adult, the adult must
ensure to keep them out of reach of infants and children. Seek medical attention
immediately if a child has swallowed a battery.
• To maintain the product do not use any chemical or cleaning agent or wet cloth, please
only ensure to utilize a dry cloth to wipe it down from marks or dust and only after
unplugging the product from the power socket.
• Please ensure to contact our call center for any repair or service required for the products.
Please make sure upon positioning this product, the place is:
• Not wet or damp and Well ventilated
• Away from direct sunlight or heaters.
• Away from splashes or food.
• Protected from excessive dust or grease.
• Do not place this equipment in a confined space such as a bookcase or similar unit. Allow
20cm above and 5cm spacing on both sides for proper ventilation.
• Do not place the Soundbar near heat sources such as radiators, stoves or other audio
visual equipment that produce heat.
• Do not place containers with liquids, if liquid falls inside the products it may result in
short-circuit, fire or electric shock.
• Do not place small metallic objects on top of the unit.
• Do not use or store flammable or combustible materials near the unit. Doing so may
result in fire or explosion. Do not place any naked flame sources, such as lit candles,
cigarettes or incense sticks on top of the soundbar.
7
REMOTE CONTROL
: standby mode for power ON/OFF
M : switch to dierent mode
(Bluetooth, Aux, Optical,HDMI)
VOL+: press to increase the sound volume
: previous program
(only work under USB & BT mode)
Bass - : press to decrease the Bass eect
: mute mode
: play/pause
(only work under USB and BT mode)
: next program
(only work under USB and BT mode)
VOL - : press to decrease the sound volume
Treble - : press to decrease the treble eect
Treble + : press to increase the treble eect
8
CAUTION!
Battery Precautions
• Do not use other batteries other than the one specified in this manual.
• Danger of explosion if incorrectly replaced by a battery other than the one specified.
• Do not store battery with other metallic objects, doing so can cause the battery to
short-circuit, leak or explode.
• Ensure the battery is not exposed to excessive heat, direct sunlight or fire.
• Do not try to short-circuit, disassemble or throw the battery into a fire.
• Dispose of batteries promptly and correctly, observing any local hazardous
waste regulations.
Remote Control: requires 2 AAA batteries (included)
REMOTE CONTROL (Cont.)
9
PRODUCT OVERVIEW
FRONT VIEW
TOP VIEW
REAR BACK VIEW
BOTTOM VIEW
10
PRODUCT OVERVIEW (Cont.)
1: 100-240V POWER PORT: Connect to power supply
2: AUX IN: Auxiliary audio input from mp3/phone/set-top box devices
3: HDMI ARC
4: OPTICAL IN
5: USB: Audio input from a USB storage device, upgrade software of this product
6: : Switch the soundbar on or to standby
7: : Decrease the volume
8: : Increase the volume
9: : Select an input source for the soundbar
100-240V
50-60HZ AUX HDMI OPTI USB
11
GENERAL OPERATION
POWER ON & OFF
1. Plug in the power cord with one side of AC IN on soundbar and the other side to an AC
wall outlet. When you connect the soundbar to the main socket, the unit will be in
STANDBY mode, firstly its light will on in red.
2. Switch on the sound bar by short-pressing button on top of the soundbar or on remote
control, then it will enter into bluetooth mode automatically.
3. Press and hold the button on sound bar or on the remote control for 2 seconds to
switch it off, and then disconnect the main plug from the main socket if you want to switch
the unit off completely.
SELECT MODES
Press the input button on the top of the soundbar or press the MODE button on the remote
control to select the BT, AUX, OPTICAL, HDMI Arc in, USB mode. The selected mode will show
by the different light indication and the voice prompts.
PLAYING AUDIO VIA BT CONNECTION
Turn on the sound bar and then the soundbar will enter into bluetooth mode automatically, or
if it’s on other mode, short-press the button on sound bar or remote control to switch it to
Bluetooth mode and the blue LED light on the sound bar will flicker in the Bluetooth pairing
mode.
Activate the pairing function on your phone or other compatible device & select “BPSB21DW1”
by BT connection.
1. When successfully paired, you will hear a voice prompt “bluetooth connected” and the LED
turn to solid blue light. Then music on your phone or other compatible device that you
selected can be played on the sound bar.
2. You can use the volume buttons on the sound bar or on the remote control to adjust the
volume to your requirements
3. If you wish, you can change the audio settings by using the relevant buttons on the
remote control.
Notes:
• If your pairing device gets switched off or gets manually disconnected, the sound bar will
automatically enter pairing mode.
• A successful connection will be re-established with the already paired device(s) once you
re-enter wireless range (10m). To connect to other devices, repeat the above pairing steps.
• There is no automatic shutdown in pairing mode. The sound bar will remain in pairing mode
even if no device is paired, so switch off if not in use.
This soundbar has a last-function-used memory; it will resume using the last mode before it was
turned OFF after it is turned ON again.
12
GENERAL OPERATION (Cont.)
AUX IN (3.5MM)
Requires a 3.5mm audio cable (not included).
1. Connect a 3.5mm audio cable to the Aux In on the unit and the audio output/headphone
jack on an audio device.
2. Power ON the soundbar and press on the soundbar or switch “MODE” button to select
Aux in Mode. A voice will announce “Auxiliary” and the indicator will turn green.
3. Use the controls on the connected device to select and play audio. Be sure the volume on
your connected device is audible when you begin playing.
CONNECTING A TV BY USING A HDMI CABLE (NOT SUPPLIED)
HDMI ARC
HDMI offers superior sound and picture quality when compared to other AV connection
types, and is the easiest way to connect your media devices to the soundbar.
1. Press the button on the soundbar or the “MODE”button on the remote to select
HDMI mode.
2. Use the HDMI Cable (not supplied) to connect to the TV with the HDMI ARC port,
3. Use the volume buttons on the TV’s remote control to change the volume on
the Soundbar.
OPTICAL INPUT
Requires an audio source with an Optical Audio Output and a Digital
Optical Audio Cable (not included).
1. Using a Digital Optical Audio Cable, connect the Optical Input on the soundbar to the
Optical Output on your audio source (TV, amplifier, etc.)
2. Power ON the soundbar and press Optical on the remote or on the soundbar to select
Optical Mode. A voice will announce the source mode and the indicator will turn orange.
3. On the connected audio source (TV, amplifier, etc. ), be sure the audio settings are set to
PCM or Optical Audio.
4. Audio played through the connected audio source (TV, amplifier, etc. )should now be
heard through the speaker.
13
IMPORTANT TIPS FOR OPTICAL AUDIO
• Use the correct optical audio cable and make sure that it is firmly seated in both source
and soundbar sockets.
• Optical audio output is activated from the audio source (a red light should be visible from
the optical socket). It may be labeled SPDIF in the settings menu of the source.
The optical output source should be set to output PCM and not Dolby Digital.
USB PLAYING
1. Short press the button to turn on the soundbar, insert the USB to the USB card slot, and
the soundbar will play the music in the USB drive, short press to play/pause the music.
2. Short press or to play the previous/next music.
GENERAL OPERATION (Cont.)
14
TROUBLESHOOTING
Troubles Solutions
Pairing connection via
Bluetooth cannot be
completed
Other mobile device has connected before use and
the mobile device has not left as well as its
Bluetooth is not o. When it connects, Bluetooth
of this device will automatically find the Bluetooth
device and connect. First, turn o Bluetooth of
the connected Bluetooth devices, then the next
Bluetooth device can be found and normally paired
to connect.
Volume of playback
via Bluetooth is small
After connections with mobile devices, volume of
Bluetooth device is not up but at the default output
level. Turn on the mobile device output. Output
volume of Bluetooth device is low itself.
Connection distance
via Bluetooth is short
Obstruction exists between mobile devices and
Bluetooth device. Remove obstructions.
Connection via
Bluetooth right,
sometimes not work
properly
Obstruction exists between mobile devices and
Bluetooth device. Remove obstructions.
Too far away from Bluetooth device to connected
mobile devices, beyond the connection range.
Shorten the distance between the Bluetooth device
and mobile devices.
15
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth
SIG, Inc. and any use of such marks by Ayonz Pty Ltd is under license. Other trademarks
and trade names are those of their respective owners.
SPECIFICATIONS
Power Supply 100-240V ~ 50-60Hz 1.5A
Frequency Response Soundbar: 50Hz to 15kHz
Bluetooth 5.1, A2DP, AVRCP
Bluetooth Range Up to 10m
Dimensions Soundbar: 940 (w) x 96.8 (h) x 61.5 (d) mm
What’s In The Box Soundbar, Remote Control, AC Power Cable, 3.5mm to
RCA Cable, Instruction Manual
CUSTOMER HELPLINE:
info@ayonz.com
DISTRIBUTED BY:
Ayonz Pty Ltd
/