Urbanworx UXSHTRO2 User manual

Brand: Urbanworx

Model: UXSHTRO2

Type: User manual

Customer Helpline: info@ayonz.com

Distributed by: Ayonz Pty Ltd

READING AND STORING THE USER MANUAL

This user manual is part of the product (hereinafter also called “device”).

It contains important information on how to set up and use the device.

Before using the device, read the operating manual carefully, in particular

the safety instructions. Failure to follow this operating manual may lead to

severe injuries or product damage.

This user manual is based on the standards and regulations that are valid

within the Australia. Outside the Australia, please also note the country -

speciﬁc directives and laws.

Keep this operating manual for future reference. If you pass this device on

to a third party, you must also supply this operating manual.

UXSHTRO2

SHOPPING

TROLLEY

ASSEMBLY INSTRUCTIONS

Please read all instructions before adjusting or using the trolley.

Maximum loading capacity: 35kg

NOTE:

Do not have anyone push you while you are seated on the trolley. This is a

shopping storage aid only and is not to be used as a transportation

device.

PART LIST

STEP 1 - Take out the

protective cap.

Wheel

2 PCS

Strap

1 PC

STEP 2 - Align the wheel core

with the bearing, hear the click,

and install it in place.

Bag

1 PC

Baseboard

1 PC

Fender

2 PCS

Frame

1 PC

Protective Cap

The protective cap shall be delivered after installation, and the

customer shall throw it out before receiving the wheel, only for

protecting the carton.

STEP 3 - When the whole frame

is opened, a click is heard and

it is fully opened.

STEP 4 - Install mudguards on

both sides.

STEP 5 - Install bag. STEP 6 - Strap ﬁxation.

Urbanworx UXSHTRO2 User manual

Brand: Urbanworx

Model: UXSHTRO2

Type: User manual

Download PDF

report

Urbanworx UXSHTRO2 User manual

Urbanworx UXSHTRO2 User manual

Other documents