Miki MIC Pre-amplifier User manual

Brand: Miki

Model: MIC Pre-amplifier

Type: User manual

Miki MIC Pre-amplifier

Miki MIC Pre-amplifier is a microphone cable with an integrated pre-amplifier that allows you to connect an external microphone to your iPhone or other mobile device, delivering optimum sound quality.

It features a frequency response of 20Hz to 20kHz, a gain range of -33dB to +7dB, and an input impedance of 100k to 1k. The XLR connector allows you to connect any dynamic microphone, while the 3.5mm jack plug inserts into your phone’s headset input.

The sensitivity switch lets you adjust the gain to prevent overloading your phone’s input, and the HI/LO/LINE settings provide maximum gain, 10dB attenuation, or 40dB attenuation, respectively.

Miki MIC Pre-amplifier

The sensitivity switch lets you adjust the gain to prevent overloading your phone’s input, and the HI/LO/LINE settings provide maximum gain, 10dB attenuation, or 40dB attenuation, respectively.

for iPad, iPhone, iPod touch and other mobile devices

User manual

Microphone cable with integrated pre-amplier, available in

black. Connects an external microphone or line level signal

to your iPhone or other mobile device delivering optimum

quality.

Specications

Frequency response ................. 20Hz - 20kHz

Gain .............................-33dB to +7dB

Input impedance ......................100K to 1K

Weight ..............................100 grams

AMP 3.5 mm

PHONES

XLR

smart connection

BROADCAST

XLR Connector

Connect any dynamic microphone to this cable. Battery-

powered microphones - those using replaceable AA

batteries - can also be used (not possible for phantom-

powered microphones).

MIC Pre-amplier

Insert your headphone into the 3.5 mm headphone socket.

Sensitivity switch

HI LO LINE

maximum gain attenuation of 10dB attenuation of 40dB

3.5 mm Jack Plug

Insert into your phone’s headset input

Step 1

Use the sensitivity

switch

on the

MIKI cable to ensure the phone’s

input is not overloaded at the

loudest volumes.

Try to get the volume level to

peak between -20dB and -10dB.

Step 2

Then use the Mic level in LUCI

Live to increase the volume level

if required.

Proper care

Do not expose the MIKI to extreme temperatures.

Warranty information

Technica Del Arte b.v. warrants this product to be free of

defects in material or workmanship for a period of 2 years

from the date of the original purchase from an authorized

LUCI distributor or reseller. Technica Del Arte will repair or

replace the defective product at its discretion if returned

within the warranty period. This warranty is in lieu of all other

warranties, expressed or implied, including, but not limited

to, any implied warranty of merchantability or tness for a

particular purpose.

Technical support

For all LUCI Software check out the LUCI manuals at the

support page of www.luci.eu. For technical assistance go to

https://support.technicadelarte.com.

Miki - B_2016_105width

Technica Del Arte bv

Frankenstraat 148

6224 GT Maastricht

The Netherlands

T: +31 (0) 43 321 94 99

[email protected]

www.technicadelarte.com

AMP 3.5 mm

PHONES

XLR

smart connection

BROADCAST

Miki MIC Pre-amplifier User manual

Brand: Miki

Model: MIC Pre-amplifier

Type: User manual

Miki MIC Pre-amplifier

The sensitivity switch lets you adjust the gain to prevent overloading your phone’s input, and the HI/LO/LINE settings provide maximum gain, 10dB attenuation, or 40dB attenuation, respectively.

Download PDF

report

Miki MIC Pre-amplifier User manual

Miki MIC Pre-amplifier User manual

Other documents