Midmark 9A474 Installation guide

Midmark
Brand
Midmark
Model
9A474
Type
Installation guide

This manual is also suitable for

English-1
© Midmark Corporation 2010 Style A
Wall Mount Bracket [9A474, 9A623]
003-2314-99 Rev. AA1 9/27/17
Intended Use:
To mount Ritter 253 exam light to wall.
Wall Anchor Holes
Equipment Alert
The wall anchors supplied are designed for drywall.
If your wall is constructed of something other than
drywall, use anchors appropriate for the material.
Step 1: Mark holes for wall anchors.
A) Position mounting plate on wall.
B) Mark location of four wall anchor holes.
Compatible with:
Ritter 253 Exam Light
Wall Anchor Holes
Step 2: Drill holes / Install wall anchors.
A) Using 3/8” bit, drill holes marked in Step 1.
B) Install wall anchors.
English-2
Step 3: Tighten wall anchors / Remove screws.
A) Tighten screws to expand wall anchors.
B) Loosen / remove screws.
Step 4: Install light / Mount bracket to wall.
A) Secure light to bracket with four flat head screws.
B) Slide base covers onto anchor screws.
C) Secure bracket to wall with four anchor screws.
D) Install four screw covers.
Base Cover
Screw Cover
MA8201i
Protective Film
Before using light:
Remove protective lm from lens.
Midmark Corporation
For contact information, go to:
www.midmark.com
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Midmark 9A474 Installation guide

Midmark
Brand
Midmark
Model
9A474
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents