Dell PowerConnect B-DCX User guide

Type
User guide

This manual is also suitable for

53-1002998-01
26 July 2013
®
752
Fabric Watch
Administrator’s Guide
Supporting Fabric OS v7.2.0
Copyright © 2000, 2002-2013 Brocade Communications Systems, Inc. All Rights Reserved.
ADX, AnyIO, Brocade, Brocade Assurance, the B-wing symbol, DCX, Fabric OS, ICX, MLX, MyBrocade, OpenScript, VCS, VDX, and
Vyatta are registered trademarks, and HyperEdge, The Effortless Network, and The On-Demand Data Center are trademarks of
Brocade Communications Systems, Inc., in the United States and/or in other countries. Other brands, products, or service names
mentioned may be trademarks of their respective owners.
Notice: This document is for informational purposes only and does not set forth any warranty, expressed or implied, concerning
any equipment, equipment feature, or service offered or to be offered by Brocade. Brocade reserves the right to make changes to
this document at any time, without notice, and assumes no responsibility for its use. This informational document describes
features that may not be currently available. Contact a Brocade sales office for information on feature and product availability.
Export of technical data contained in this document may require an export license from the United States government.
The authors and Brocade Communications Systems, Inc. shall have no liability or responsibility to any person or entity with
respect to any loss, cost, liability, or damages arising from the information contained in this book or the computer programs that
accompany it.
The product described by this document may contain “open source” software covered by the GNU General Public License or other
open source license agreements. To find out which open source software is included in Brocade products, view the licensing
terms applicable to the open source software, and obtain a copy of the programming source code, please visit
http://www.brocade.com/support/oscd.
Brocade Communications Systems, Incorporated
Corporate and Latin American Headquarters
Brocade Communications Systems, Inc.
130 Holger Way
San Jose, CA 95134
Tel: 1-408-333-8000
Fax: 1-408-333-8101
E-mail: info@brocade.com
Asia-Pacific Headquarters
Brocade Communications Systems China HK, Ltd.
No. 1 Guanghua Road
Chao Yang District
Units 2718 and 2818
Beijing 100020, China
Tel: +8610 6588 8888
Fax: +8610 6588 9999
E-mail: china-info@brocade.com
European Headquarters
Brocade Communications Switzerland Sàrl
Centre Swissair
Tour B - 4ème étage
29, Route de l'Aéroport
Case Postale 105
CH-1215 Genève 15
Switzerland
Tel: +41 22 799 5640
Fax: +41 22 799 5641
E-mail: emea-info@brocade.com
Asia-Pacific Headquarters
Brocade Communications Systems Co., Ltd. (Shenzhen WFOE)
Citic Plaza
No. 233 Tian He Road North
Unit 1308 – 13th Floor
Guangzhou, China
Tel: +8620 3891 2000
Fax: +8620 3891 2111
E-mail: china-info@brocade.com
Fabric Watch Administrator’s Guide iii
53-1002998-01
Document History
Title Publication Number Summary of Changes Date
Fabric Watch User’s Guide 53-0001559-02 New document May 2000
Fabric Watch User’s Guide 53-0000186-02 n/a March 2002
Fabric Watch User’s Guide 53-0000504-02 n/a April 2003
Fabric Watch User’s Guide 53-0000524-02 n/a April 2003
Fabric Watch User’s Guide 53-0000524-03 Updated default values and restructured
the document.
December 2003
Fabric Watch User’s Guide 53-0000524-04 Rewrote the document completely and
added new features.
Reorganized procedures into steps,
rewrote many sections to improve clarity.
Added technical and editorial changes.
April 2004
Fabric Watch User’s Guide 53-0000524-05 Updates to support Fabric OS v4.4.0
features and Brocade 3016 and 4100
switches.
Rewrote Chapter 4, “Configuring Fabric
Watch.”
September
2004
Fabric Watch Administrator’s Guide 53-0000524-06 Renamed book. Combined the
Introduction and Concepts chapters into
a single chapter. Added support for
Brocade 200E, Brocade 3014, and
Brocade 48000.
March 2005
Fabric Watch Administrator’s Guide 53-1000047-01 Updates to support Fabric OS v5.1.0
features and Brocade 4900 and 7500
switches.
November 2005
Fabric Watch Administrator’s Guide 53-1000243-01 Updates to support Fabric OS v5.2.0
features and the FC4-16IP and FC4-48
port blades. Removed references to
Brocade 3014 and 3016, as embedded
switches are not supported in Fabric OS
v5.2.0.
September
2006
Fabric Watch Administrator’s Guide 53-1000438-01 Updates to support Fabric OS v5.3.0,
implementation of IPv6.
June 2007
Fabric Watch Administrator’s Guide 53-1000601-01 Updates to support Fabric OS v6.0.0. September
2007
Fabric Watch Administrator’s Guide 53-1000601-02 Updates to support Fabric OS v6.1.0. March 2008
Fabric Watch Administrator’s Guide 53-1000601-03 Reorganized many sections to improve
clarity.
Updates to support Fabric OS v6.2.0:
Virtual Fabric, port movement, fan
monitoring behavior, link reset, and DCX-
4S.
November 2008
Fabric Watch Administrator’s Guide 53-1001342-01 Updates to support Fabric OS v6.3.0:
portThConfig, portFencing, and
sysMonitor commands and Brocade
8000 support.
July 2009
iv Fabric Watch Administrator’s Guide
53-1002998-01
Fabric Watch Administrator’s Guide 53-1001770-01 Updates to support Fabric OS v6.4.0:
portThConfig, sysMonitor, thConfig, and
portFencing commands (recommended
for use in configuring class areas instead
of the fwConfigure command);
recommended class settings added.
March 2010
Fabric Watch Administrator’s Guide 53-1002153-01 Updates to support Fabric OS v7.0.0:
Removed deprecated commands:
fwconfigure and fwshow.
Removed RAPI trap support.
Added information about “in-
between” thresholds.
Updated portthconfig command
recommendations.
Changed Port Fencing section.
Added the thMonitor command,
which supports the SFP class.
Added information about 16 Gbps
and QSFP SFPs.
Added packet loss monitoring
enhancements for the VE_Port.
Removed support for “changed”
action.
Removed support for “seconds”
time base.
Added pause / continue feature.
April 2011
Fabric Watch Administrator’s Guide 53-1002153-02 Updated the Copyright section.
Added support for Brocade 6505.
Updates to support Fabric OS v7.0.1:
Chapter 1—Added universal
temporary license support
information.
Chapter 7—Added port fencing
thresholds for state change and link
reset areas.
Chapter 8—Added information
about the switch status on the
power supply for the Brocade DCX
8510-8.
Chapter 9—Removed information
regarding custom defined
percentage values using Web Tools.
December 2011
Fabric Watch Administrator’s Guide 53-1002752-01 Very minor updates (this is the last
release for Fabric Watch; being replaced
by MAPS in next Fabric OS version)
Continuous alerting mode has been
removed from Fabric Watch.
A modification to the ITW counter.
December 2012
Fabric Watch Administrator’s Guide 53-1002752-02 Corrected errors and omissions in the
guide.
March 2013
Fabric Watch Administrator’s Guide 53-1002998-01 Corrected errors and omissions in the
guide.
July 2013
Title Publication Number Summary of Changes Date
Fabric Watch Administrator’s Guide v
53-1002998-01
Contents
About This Document
How this document is organized . . . . . . . . . . . . . . . . . . . . . . . . . . . . xv
Supported hardware and software . . . . . . . . . . . . . . . . . . . . . . . . . . xvi
Deprecated hardware platform support. . . . . . . . . . . . . . . . . . . xvi
What’s new in this document. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .xvii
Document conventions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .xvii
Text formatting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvii
Notes, cautions, and warnings . . . . . . . . . . . . . . . . . . . . . . . . . xvii
Key terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xviii
Additional information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xviii
Other industry resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xviii
Getting technical help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xix
Document feedback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xix
Chapter 1 Fabric Watch
Fabric health . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Fabric Watch overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Role-based access control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Fabric Watch licensing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Universal temporary license support . . . . . . . . . . . . . . . . . . . . . . 3
Reasons to customize Fabric Watch settings . . . . . . . . . . . . . . . . . . . 3
Event behavior configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Alert configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Time base configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Threshold and action configuration . . . . . . . . . . . . . . . . . . . . . . . 4
Monitoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Post-processing of messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Class, area, and element hierarchy . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Switch monitoring components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Fabric events monitoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Performance monitoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Security monitoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
SFP monitoring. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Port monitoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
System resource monitoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Switch policies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Logical switch support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
vi Fabric Watch Administrator’s Guide
53-1002998-01
Threshold monitoring using SNMP tables . . . . . . . . . . . . . . . . . . . . . . 8
MIB capability configuration parameters . . . . . . . . . . . . . . . . . . . 8
Fabric Watch event settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Fabric Watch notification types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
E-mail alert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
SNMP traps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
RASlog (switch event) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Locked port log. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Fabric Watch audit messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Data values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Fabric Watch support in Access Gateway mode . . . . . . . . . . . . . . . .12
Chapter 2 Fabric Watch Thresholds
Threshold values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
In-between buffer values. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Threshold triggers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Above event trigger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Below event trigger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Audit and RASlog messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Time bases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Time base set to none . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Time base set to other than none. . . . . . . . . . . . . . . . . . . . . . . . 16
Fabric Watch alarm behavior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Chapter 3 Fabric Watch Threshold Components
Fabric Watch classes, areas, and elements . . . . . . . . . . . . . . . . . . .19
Classes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Class areas. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Elements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Chapter 4 Fabric Watch Activation
Interfaces for activating Fabric Watch . . . . . . . . . . . . . . . . . . . . . . . .23
Activating Fabric Watch using a Telnet session . . . . . . . . . . . . . . . . 23
Activating Fabric Watch using SNMP . . . . . . . . . . . . . . . . . . . . . . . . . 24
Activating Fabric Watch using Web Tools . . . . . . . . . . . . . . . . . . . . .28
Chapter 5 Fabric Watch Configuration
Fabric Watch configuration tasks. . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Setting Fabric Watch custom and default values . . . . . . . . . . . . . . .30
Fabric Watch Administrator’s Guide vii
53-1002998-01
E-mail notification configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Showing e-mail configuration information . . . . . . . . . . . . . . . . . 31
Disabling an e-mail alert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Enabling an e-mail alert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Sending a test e-mail message. . . . . . . . . . . . . . . . . . . . . . . . . .32
Setting the recipient e-mail address for an e-mail alert . . . . . . 33
Setting the relay host IP address . . . . . . . . . . . . . . . . . . . . . . . .33
Displaying the relay host configuration . . . . . . . . . . . . . . . . . . .34
Removing the relay host configuration. . . . . . . . . . . . . . . . . . . .34
Notification configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Configuring alarm notifications. . . . . . . . . . . . . . . . . . . . . . . . . .34
Chapter 6 Fabric, Security, SFP, and Performance Monitoring
Fabric monitoring guidelines and default settings . . . . . . . . . . . . . .35
Fabric class areas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Fabric monitoring setting guidelines . . . . . . . . . . . . . . . . . . . . .36
Fabric class default settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Security monitoring guidelines and default settings . . . . . . . . . . . . 37
Security class areas. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Security monitoring default settings. . . . . . . . . . . . . . . . . . . . . . 38
SFP monitoring guidelines and default settings . . . . . . . . . . . . . . . .39
SFP class areas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
SFP monitoring default settings . . . . . . . . . . . . . . . . . . . . . . . . .40
Performance monitoring guidelines and default settings . . . . . . . . 41
Performance Monitor class areas. . . . . . . . . . . . . . . . . . . . . . . . 41
Performance monitoring setting guidelines . . . . . . . . . . . . . . . .42
Performance Monitor class default settings . . . . . . . . . . . . . . .42
thConfig command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
thConfig command examples . . . . . . . . . . . . . . . . . . . . . . . . . . .43
16 Gbps SFP and QSFP monitoring . . . . . . . . . . . . . . . . . . . . . .44
Recommended settings for Fabric, SFP, Performance,
and Security classes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Chapter 7 Port Monitoring
Port class areas. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Port class guidelines and default settings . . . . . . . . . . . . . . . . . . . .50
Physical port setting guidelines . . . . . . . . . . . . . . . . . . . . . . . . . 51
Port class default settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Port configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
Custom port settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
Using the nosave command . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
viii Fabric Watch Administrator’s Guide
53-1002998-01
portThConfig command procedures . . . . . . . . . . . . . . . . . . . . . . . . . 53
Port type: physical port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
E_Port subclass setting guidelines. . . . . . . . . . . . . . . . . . . . . . . 55
E_Port class default settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
FOP_Port and FCU_Port subclass setting guidelines . . . . . . . .58
FOP_Port and FCU_Port subclass default settings . . . . . . . . . . 59
VE_Port class default settings . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Port type: E_Port, FOP_Port, or FCU_Port . . . . . . . . . . . . . . . . . 61
Setting the port persistence time . . . . . . . . . . . . . . . . . . . . . . . . 62
Port fencing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62
Port fencing configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Port fencing configuration using BNA. . . . . . . . . . . . . . . . . . . . .65
Recommended port configuration settings. . . . . . . . . . . . . . . . . . . .65
Chapter 8 System Monitoring
Environment monitoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69
Environment class area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Environment monitoring setting guidelines . . . . . . . . . . . . . . . .69
Environment class default settings . . . . . . . . . . . . . . . . . . . . . . 70
Resource class settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Resource class area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70
Resource class default settings . . . . . . . . . . . . . . . . . . . . . . . . . 71
System monitoring using the sysMonitor command. . . . . . . . . . . . . 71
Using the nosave command . . . . . . . . . . . . . . . . . . . . . . . . . . . .72
Examples of the sysMonitor command . . . . . . . . . . . . . . . . . . . . . . .72
Environment class settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72
Resource class settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73
CPU and memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73
Examples of the CPU and memory commands . . . . . . . . . . . . .73
Recommended environment and resource monitoring settings . . . 74
Switch monitoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75
Switch status policy planning . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
FRU monitoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
FRU class areas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Configuring FRUs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Specifying triggers for FRU alarms . . . . . . . . . . . . . . . . . . . . . . .78
Recommended FRU settings. . . . . . . . . . . . . . . . . . . . . . . . . . . .79
Chapter 9 Fabric Watch Configuration Using Web Tools
Using Web Tools to configure Fabric Watch . . . . . . . . . . . . . . . . . . . 81
Opening the Fabric Watch window . . . . . . . . . . . . . . . . . . . . . . . 81
System monitoring using Web Tools . . . . . . . . . . . . . . . . . . . . . .82
Fabric Watch threshold configuration using Web Tools . . . . . .83
Configuring alarms for FRUs using Web Tools . . . . . . . . . . . . . . 85
Configuring alarm filters using Web Tools . . . . . . . . . . . . . . . . . 86
Fabric Watch alarm information . . . . . . . . . . . . . . . . . . . . . . . . .86
E-mail notification using Web Tools . . . . . . . . . . . . . . . . . . . . . . 87
Fabric Watch Administrator’s Guide ix
53-1002998-01
Chapter 10 Fabric Watch Reports
Fabric Watch reports. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89
Switch Availability Monitor report. . . . . . . . . . . . . . . . . . . . . . . . . . . .90
Generating a Switch Availability Monitor report. . . . . . . . . . . . . 90
Switch Health report . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Generating a Switch Health report . . . . . . . . . . . . . . . . . . . . . . . 91
Switch Status Policy report. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Generating a Switch Status Policy report. . . . . . . . . . . . . . . . . .92
Port Detail report. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .92
Generating a Port Detail report. . . . . . . . . . . . . . . . . . . . . . . . . .92
Index
x Fabric Watch Administrator’s Guide
53-1002998-01
Fabric Watch Administrator’s Guide xi
53-1002998-01
Tables
Table 1 Fabric Watch classes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Table 2 Fabric Watch configuration tasks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Table 3 Fabric class areas. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Table 4 Fabric class default settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Table 5 Security class areas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Table 6 Security class area default settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Table 7 SFP class areas. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Table 8 SFP class default settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Table 9 Performance Monitor class areas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Table 10 Performance Monitor class default settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Table 11 End-to-End Performance Monitor class default settings . . . . . . . . . . . . . . . . . . . 42
Table 12 Configuration options for thConfig command. . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Table 13 16 Gbps and QSFP configurable SFP types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Table 14 Recommended settings for Fabric, SFP, Performance, and Security classes . . 48
Table 15 Port class areas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Table 16 Port class default settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Table 17 E_Port class default settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Table 18 FOP_Port and FCU_Port subclass default settings. . . . . . . . . . . . . . . . . . . . . . . . 59
Table 19 VE_Port class default settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Table 20 Port fencing class and subclass areas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Table 21 Recommended port fencing thresholds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Table 22 Recommended configuration for the Port class. . . . . . . . . . . . . . . . . . . . . . . . . . 66
Table 23 Environment class area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Table 24 Environment class default settings for temperature . . . . . . . . . . . . . . . . . . . . . . 70
Table 25 Resource class area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Table 26 Resource class default settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Table 27 Recommended Environment and Resource class settings. . . . . . . . . . . . . . . . . 74
Table 28 Switch status policy factors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Table 29 FRU class areas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Table 30 Recommended FRU settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Table 31 Alarm notification tab fields. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Table 32 Fabric OS commands to view Fabric Watch reports . . . . . . . . . . . . . . . . . . . . . . 89
Table 33 Port Detail report columns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
xii Fabric Watch Administrator’s Guide
53-1002998-01
Fabric Watch Administrator’s Guide xiii
53-1002998-01
Figures
Figure 1 In-between buffer values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Figure 2 Above event trigger with buffer zone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Figure 3 Time base set to none . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Figure 4 Event trigger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Figure 5 Configuring Fabric Watch using SNMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Figure 6 Example OID tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Figure 7 Fabric Watch window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
xiv Fabric Watch Administrators Guide
53-1002998-01
Fabric Watch Administrator’s Guide xv
53-1002998-01
About This Document
In this chapter
How this document is organized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xv
Supported hardware and software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvi
What’s new in this document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvii
Document conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvii
Additional information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xviii
Getting technical help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xix
Document feedback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xix
How this document is organized
This document is organized to help you find the information that you want as quickly and easily as
possible.
This document contains the following components:
Chapter 1, “Fabric Watch,” provides an introduction to Fabric Watch and the benefits of its use.
It also defines concepts that are useful in Fabric Watch configuration.
Chapter 2, “Fabric Watch Thresholds,” explains the concept of high and low thresholds and
buffer values and provides examples of various threshold settings.
Chapter 3, “Fabric Watch Threshold Components,” describes the components (class, area, and
element) associated with every monitored behavior.
Chapter 4, “Fabric Watch Activation,” describes the Fabric Watch requirements, provides an
overview of the interfaces, and explains the methods of accessing Fabric Watch through each
interface.
Chapter 5, “Fabric Watch Configuration,” provides a comprehensive table that lists the
commands you can use to create custom threshold configurations. This chapter discusses
configuration files, setting the port persistence time, custom and default values, and e-mail
notifications.
Chapter 6, “Fabric, Security, SFP, and Performance Monitoring,” describes how to configure
high and low thresholds for Fabric Watch event monitoring for SFP, Fabric, Performance, and
Security classes using the thConfig command.
Chapter 7, “Port Monitoring, describes how to configure high and low thresholds, buffers,
triggers, and actions on specified ports using the portThConfig command.
Chapter 8, “System Monitoring,” describes how to configure system memory and CPU values
using the sysMonitor command. This chapter also lists the switch status policy factors that
affect the health of the switch, describes how to set and view switch status policies, and
details how to configure FRUs.
xvi Fabric Watch Administrators Guide
53-1002998-01
Chapter 9, “Fabric Watch Configuration Using Web Tools,” provides information about how to
use Web Tools to configure Fabric Watch settings, an alternative to using the command line
interface.
Chapter 10, “Fabric Watch Reports,” describes the reports available through Fabric Watch and
the methods of accessing each report.
Supported hardware and software
Although many different software and hardware configurations are tested and supported by
Brocade Communications Systems, Inc. for Fabric OS 7.2.0, documenting all possible
configurations and scenarios is beyond the scope of this document.
Deprecated hardware platform support
The following hardware platforms are not supported in the Fabric OS 7.2.0 release. These platforms
can interoperate with switches running Fabric OS 7.0.0, but cannot load Fabric OS 7.2.0.
Brocade 4100
Brocade 4900
Brocade 5000
Brocade 7500/7500E
Brocade 7600
Brocade 8000
Brocade 48000
The following blades are not supported in any chassis operating with Fabric OS 7.2.0:
FA4-18
FC4-16IP
FC4-16
FC4-32
FC4-48
Fabric Watch Administrator’s Guide xvii
53-1002998-01
What’s new in this document
“Deprecated hardware platform support” on page xvi updated to remove support for the
Brocade 8000 switch.
Updated Table 24 on page 70 to remove information about Brocade 8000 default settings for
temperature.
Updated “Logical switch support” on page 8.
Added new section “Monitoring the filter performance class” on page 44.
Document conventions
This section describes text formatting conventions and important notices formats.
Text formatting
The narrative-text formatting conventions that are used in this document are as follows:
bold text Identifies command names
Identifies the names of user-manipulated GUI elements
Identifies keywords and operands
Identifies text to enter at the GUI or CLI
italic text Provides emphasis
Identifies variables
Identifies paths and Internet addresses
Identifies document titles
code text Identifies CLI output
Identifies syntax examples
For readability, command names in the narrative portions of this guide are presented in mixed
lettercase: for example, switchShow. In actual examples, command lettercase is often all
lowercase. Otherwise, this manual specifically notes those cases in which a command is case
sensitive.
Notes, cautions, and warnings
The following notices and statements are used in this manual. They are listed below in order of
increasing severity of potential hazards.
NOTE
A note provides a tip, guidance, or advice, emphasizes important information, or provides a
reference to related information.
ATTENTION
An Attention statement indicates potential damage to hardware or data.
xviii Fabric Watch Administrator’s Guide
53-1002998-01
CAUTION
A Caution statement alerts you to situations that can be potentially hazardous to you or cause
damage to hardware, firmware, software, or data.
DANGER
A Danger statement indicates conditions or situations that can be potentially lethal or extremely
hazardous to you. Safety labels are also attached directly to products to warn of these conditions
or situations.
Key terms
For definitions specific to Brocade and Fibre Channel, refer to the Brocade Glossary.
For definitions of SAN-specific terms, visit the Storage Networking Industry Association online
dictionary at http://www.snia.org/education/dictionary.
Additional information
This section lists additional Brocade and industry-specific documentation that you might find
helpful.
To get up-to-the-minute information, go to http://my.brocade.com to register at no cost for a user ID
and password.
White papers, online demonstrations, and data sheets are available through the Brocade website
at:
http://www.brocade.com/products-solutions/products/index.page
For additional Brocade documentation, visit the Brocade website:
http://www.brocade.com
Release notes are available on the MyBrocade website and are also bundled with the Fabric OS
firmware.
Other industry resources
For additional resource information, visit the Technical Committee T11 website. This website
provides interface standards for high-performance and mass storage applications for Fibre
Channel, storage management, and other applications:
http://www.t11.org
For information about the Fibre Channel industry, visit the Fibre Channel Industry Association
website:
http://www.fibrechannel.org
Fabric Watch Administrator’s Guide xix
53-1002998-01
Getting technical help
Contact your switch support supplier for hardware, firmware, and software support, including
product repairs and part ordering. To expedite your call, have the following information available:
1. General Information
Switch model
Switch operating system version
Error numbers and messages received
supportSave command output
Detailed description of the problem, including the switch or fabric behavior immediately
following the problem, and specific questions
Description of any troubleshooting steps already performed and the results
Serial console and Telnet session logs
Syslog message logs
2. Switch Serial Number
The switch serial number and corresponding bar code are provided on the serial number label.
For specific serial number locations, refer to the Brocade 6520 Hardware Reference Manual.
3. World Wide Name (WWN)
Use the licenseIdShow command to display the WWN of the chassis.
If you cannot use the licenseIdShow command because the switch is inoperable, you can get
the WWN from the same place as the serial number, except for the Brocade DCX. For the
Brocade DCX, access the numbers on the WWN cards by removing the Brocade logo plate at
the top of the nonport side of the chassis.
Document feedback
Quality is our first concern at Brocade and we have made every effort to ensure the accuracy and
completeness of this document. However, if you find an error or an omission, or you think that a
topic needs further development, we want to hear from you. Forward your feedback to:
documentation@brocade.com
Provide the title and version number of the document and as much detail as possible about your
comment, including the topic heading and page number and your suggestions for improvement.
xx Fabric Watch Administrator’s Guide
53-1002998-01
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118

Dell PowerConnect B-DCX User guide

Type
User guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI