Emsco 2652-1 Operating instructions

Ornamental Gate Fencing

Lay out fencing pieces along the area where you

want to install. Be sure the fencing pieces are touching. You

may want to hook them together as you proceed.

See illustration below.

Push pointed anchor posts into ground.

If ground is too hard, soften it with water. If necessary, make

starter holes with screwdriver.

Continue fencing run.

As you go, hook Victorian fencing

pieces together with convenient

interlocking system.

Girard, PA 16417

www.emscogroup.com

3 EASY STEPS

– for all sizes –

This manual is also suitable for

Download PDF