Eurotherm 810 is a microprocessor based temperature controller with a 9-bar LED display. It has three control modes: slow cycle time-proportioning, fast cycle time-proportioning, or on-off. The Eurotherm 810 has two alarm outputs, each with a relay contact rated at 1A/264V rms. It also has an isolated DC output, a logic output an unlinearised 0-10V or 0-5V analogue Retransmission output. The setpoint can be adjusted digitally or via an external 10K potentiometer.
Eurotherm 810 is a microprocessor based temperature controller with a 9-bar LED display. It has three control modes: slow cycle time-proportioning, fast cycle time-proportioning, or on-off. The Eurotherm 810 has two alarm outputs, each with a relay contact rated at 1A/264V rms. It also has an isolated DC output, a logic output an unlinearised 0-10V or 0-5V analogue Retransmission output. The setpoint can be adjusted digitally or via an external 10K potentiometer.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
Eurotherm 810 is a microprocessor based temperature controller with a 9-bar LED display. It has three control modes: slow cycle time-proportioning, fast cycle time-proportioning, or on-off. The Eurotherm 810 has two alarm outputs, each with a relay contact rated at 1A/264V rms. It also has an isolated DC output, a logic output an unlinearised 0-10V or 0-5V analogue Retransmission output. The setpoint can be adjusted digitally or via an external 10K potentiometer.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Eurotherm 818 Operating instructions
-
-
-
-
Eurotherm 2204e/2208 Owner's manual
-
-
-
-
-
Other documents
-
Eurotherm controls 847 User manual
-
MRC 2416 User manual
-
MRC 3200 User manual
-
Omega CN2216 Owner's manual
-
-
-
Marathon Computer Computer Monitor AACC 2000 User manual
-
-
PureAire 99091 Operating instructions
-
PureAire Remote Digital Display Alarm Indicator User guide
