Lenovo Px4-300r User manual

Category
Routers
Type
User manual

This manual is also suitable for

px4-300r Network Storage
Array
with LifeLine 4.0
User Guide
© 2013 LenovoEMC, Ltd. All rights reserved.
Lenovo and the Lenovo logo are registered trademarks of Lenovo in the United States, other countries, or
both. The EMC logo is a registered trademark of EMC Corporation in the United States and/or other
countries. LenovoEMC and LifeLine are registered trademarks or trademarks of LenovoEMC, Ltd. in the
United States, other countries, or both. Windows is a trademark of the Microsoft group of companies. Mac
is a trademark of Apple Inc., registered in the United States and other countries. Linux® is the registered
trademark of Linus Torvalds in the U.S. and other countries. Certain other product names, brand names,
and company names may be trademarks or designations of their respective owners.
CONTENTS
Setting up Your px4-300r Network Storage Array 1
Setup Overview 2
Set up my px4-300r Network Storage Array if it's not discovered 3
Discovering with LenovoEMC Storage Manager 3
Discovering the px4-300r without the Internet 3
Setup Page 4
Network Connection 5
Connecting the px4-300r Network Storage Array to Your Network 5
Network Settings 6
Manually Configuring Network Settings 7
Bonding NICs 8
VLAN Settings 8
Naming Your px4-300r Network Storage Array 10
Setting up Active Directory 10
Configuring Your px4-300r Network Storage Array to Use Active Directory 11
Enabling Active Directory Trusted Domains 12
Customizing the Access to Features on Your px4-300r Network Storage Array 13
Enabling the Display of Features 13
Enabling Access Permissions to Features 13
Non-Administrator User Log In 14
Obtaining Alerts About Your px4-300r Network Storage Array 15
Tracing Events on Your px4-300r Network Storage Array 16
Downloading the complete event log file 16
Obtaining System Status for Your px4-300r Network Storage Array 17
Space Usage 17
Control Panel 17
Device Information 17
Using Your px4-300r Network Storage Array in Various Time Zones 18
Setting the Display Language for Your px4-300r Network Storage Array 19
Printing Documents 20
Setting up Personal Cloud, Security, and File Sharing 21
Sharing Files 22
Sharing Overview 23
iii
Interfaces for Sharing 23
Shares 24
What are Shares and How Do I Organize Content with Them? 24
Adding Shares 24
Managing Shares 25
Deleting Shares 27
Using Protocols to Share Files 28
What Are Protocols and How Do I Use Them to Share Files? 28
AFP File Sharing for Macs 28
Bluetooth File Sharing 28
FTP File Sharing 29
NFS File Sharing 29
rsync: Synchronizing Files with Another Storage Device or Other Computers 30
TFTP 30
Monitoring Your Device with an SNMP Management Tool 30
Managing File Sharing with Web Access (http/https) 31
WebDAV: Managing Files Using HTTP or HTTPS 32
Windows DFS: Creating a Distributed Windows File System 32
Windows File Sharing 32
Sharing Content through the Home Page 33
Sharing Your Content with the World 33
Adding a Custom Home Page 33
Automatically Sending Content to Multiple People at Once 35
How to Set Up an Email Distribution Active Folder 35
Sharing Content Using Social Media: Overview 36
Managing Your Content 37
Transferring Content to and from Your px4-300r Network Storage Array with Copy Jobs 38
Copy Jobs Limitations 38
Getting Content from a USB External Storage Device 39
Safely removing external storage 39
One-touch Transferring of Content from a USB Device 40
Setting QuikTransfer 40
iSCSI: Creating IP-Based Storage Area Networks (SAN) 41
iSCSI Overview 42
Adding iSCSI Drives 43
Enabling iSCSI Drives 43
iv
Connecting to iSCSI Drives 43
Managing iSCSI Drives 44
Adding CHAP User Access to an iSCSI Drive 44
Deleting iSCSI Drives 45
Storage Pool Management 46
Understanding How Your Content Is Stored 47
Storage Pools 47
Volumes 47
Adding and Managing Storage Pools 48
To Add a Data Storage Pool 48
Improving Performance with a Cache Storage Pool 49
To Add a Cache Storage Pool 49
Assigning a Cache Pool to a Volume 49
Volumes 51
Snapshots 51
Exposing/Unexposing the Snapshot 52
Restoring a Snapshot 52
Deleting a Snapshot 52
Displaying Shares in the Snapshot 52
Make the Snapshot Read-only 52
Changing Expose Mode 52
Adding and Managing Volumes 53
Deleting a Storage Pool 55
Changing RAID Protection Types 56
Drive Management 57
Managing Drives 58
Setting Write Caching 58
Applying Global Drive Management Settings 58
Drive Status 59
Backing up and Restoring Your Content 60
Backup and Restore Overview 61
Backup of Data through RAID Protection 61
Backing up to and Restoring from Your px4-300r Network Storage Array 62
Backing up Macs with Time Machine 62
v
One-touch Transferring of Content from a USB Device 62
Copy Jobs Overview 63
Backing up Your px4-300r Network Storage Array 64
Copy Jobs 64
From: Settings 65
To: Settings 66
Setting a Schedule 66
Backing up with Mozy Backup 67
Restoring Files with Mozy Backup 68
Registering with Avamar for Backup and Restore 68
Backing up with Amazon S3 69
Restoring Files with Amazon S3 69
Backing up with LenovoEMC Personal Cloud 69
Restoring Files with Personal Cloud 69
Securing Your px4-300r Network Storage Array and Contents 70
What Is Security and Do I Need It? 71
Enabling Security and Creating an Administrator User 72
Disabling Security 72
Limiting Access to Your Content by Creating Users 73
Users 74
Users and Groups Overview 74
Adding Users 74
Managing Users 75
Deleting Users 76
Groups 78
Groups Overview 78
Adding Groups 78
Managing Groups 78
Deleting Groups 79
Using Active Directory Domain to Manage Users and Groups 80
Active Directory Users and Groups Overview 80
Managing Users and Groups with Active Directory 80
Deleting Active Directory Users and Groups 81
Managing Your px4-300r Network Storage Array with Local and Active Directory Users 82
Managing Your px4-300r Network Storage Array with Local and Active Directory Users 82
vi
Remote Access: Accessing Your px4-300r Network Storage Array From Anywhere in the
World 84
Remote Access Overview 85
Enabling Remote Access 86
Basic Option: Completing the Enable Remote Access Process 86
Premium Option: Completing the Enable Remote Access Process 86
Accessing Your px4-300r Network Storage Array Remotely 88
Personal Cloud: Accessing Your LenovoEMC Personal Cloud From Anywhere in the
World 89
What Is LenovoEMC Personal Cloud ? 90
LenovoEMC Personal Cloud Key Terms 90
Is My Content Secure? 91
LenovoEMC Personal Cloud Setup Overview 92
Creating LenovoEMC Personal Cloud 93
Configuring Router Port Forwarding for Personal Cloud 94
Router Port Forwarding 94
Configuring Your LenovoEMC Personal Cloud 95
Enabling Internet Access to the px4-300r 95
Changing Personal Cloud Settings 95
Inviting People onto Your LenovoEMC Personal Cloud 96
Joining a Trusted Device to LenovoEMC Personal Cloud 97
Managing Trusted Devices on a Personal Cloud 98
Disconnecting Trusted Devices 98
Deleting Trusted Devices 98
Using Copy Jobs with a LenovoEMC Personal Cloud 99
Disabling or Deleting Your LenovoEMC Personal Cloud 100
Accessing Content Using Your LenovoEMC Personal Cloud 101
Informing Users What to Do with LenovoEMC Personal Cloud 102
Sharing Content Using Social Media 103
Sharing Content Using Social Media: Overview 104
Facebook 105
Flickr 106
YouTube 107
Share Content through LenovoEMC Personal Cloud 108
vii
Media Management 109
Media Management Overview 110
Scanning for media content 110
Media Services Capabilities and Limitations 111
Sharing Media Content over the Internet 112
Enabling Internet Access from the Media Server Page 112
Media Aggregation 113
Enabling Media Aggregation 113
Social Media Sharing 114
Streaming Music, Movies, and Pictures 115
Example: Setting up iTunes 115
Example: Setting up Xbox 360 115
Photos 116
Photos Overview 116
Streaming Pictures 116
Creating a Slideshow on the Device Home Page 116
Automatically Resizing Your Photos 116
Getting Pictures from Your Camera 117
Getting Pictures from Your Camera 117
Music 118
Music Overview 118
Streaming Music 118
Torrents 119
Torrent Overview 119
Enabling Torrent Downloads 119
Deleting torrent jobs 119
Configuring Your Router for Torrent Downloads 119
Torrent Active Folders 120
Configuring a Torrent Active Folder 120
Videos 122
Video Capabilities Overview 122
Streaming Movies 122
Video Surveillance 122
Name 123
Space 123
Model 123
viii
Action 123
Adding Applications to Your px4-300r Network Storage Array 126
Application Overview 127
Application Installation 128
Application Manager 129
Starting or stopping an application 129
Adding applications 129
Removing applications 129
Upgrading Your px4-300r Network Storage Array 130
Software Updates 131
Auto-update process: installing a device software update 131
Manual update process: installing a device software update 131
Backing up and Recovering Your px4-300r Network Storage Array Settings 133
Backing Up Your px4-300r Network Storage Array Settings 134
Backing up Device Configuration 134
Restoring a Configuration Backup 134
Hardware Management 135
About the px4-300r Network Storage Array Components 136
Front Panel 136
Drive Bay Detail 137
Rear Panel 137
Default Settings 138
Energy Saving 139
Power Down Drives 139
Brightness 139
Wake On LAN 139
Creating A Power Schedule 139
Factory Reset 140
UPS Management 141
Troubleshooting Routers 142
Enabling the DMZ 142
Configuring Port Forwarding on Double NAT Networks 143
Bridging the Secondary Router 143
ix
Bridging the Primary Router 143
Additional Support 145
How to Get Help 146
Support 147
Legal 148
Safety Information 149
Open Source 150
Warranty Information 151
Limited Warranty Notice 151
Limited Warranty for Iomega Products 151
Regulatory Information 152
Federal Communication Commission Interference Statement 152
Canadian Verification 152
European Union conformity 152
Important WEEE Information 153
European Union RoHS 153
India RoHS 153
Lithium Battery California Perchlorate Information 153
Polyvinyl Chloride (PVC) Cable and Cord Notice 153
Recycling and environmental information 153
Export classification notice 154
Copyright and Trademark Information 155
x
Setting up Your px4-300r Network
Storage Array
Setting up Your px4-300r Network Storage Array 1
CHAPTER 1
Setup Overview
Setup with your px4-300r Network Storage Array is easy. Remove it from the box, connect it to your
network switch or hub, and then power it up. Launch a web browser and enter the setup URL identified in
the Quick Start Guide. LenovoEMC Setup launches and displays a message that your px4-300r is online
and ready to use.
You then can install client software that includes:
LenovoEMC Storage Manager
Twonky Media Server for media aggregation
LenovoEMC Storage Manager is a management tool that helps you discover your px4-300r on your
network to simplify access to content on your px4-300r from your computer. It also allows you to add your
computer as a trusted device to a LenovoEMC Personal Cloud. Refer to LenovoEMC Storage Manager
online help for additional information. Twonky Media Server consolidates all media files on devices on your
network and presents them in a unified view.
From LenovoEMC Setup, you can optionally create a Personal Cloud or begin using your px4-300r by
clicking Manage My Device.
By default, the px4-300r will attempt to acquire an IP address from DHCP, If there is not a DHCP
server available on the network, the px4-300r will use an IP address in the self-assigned APIPA
range (169.254.x.x).
Setting up Your px4-300r Network Storage Array
2 Setup Overview
Set up my px4-300r Network Storage Array if it's not
discovered
If your px4-300r is not discovered when you enter the URL identified in your Quick Start Guide, you have
two ways of discovering it.
Discovering with LenovoEMC Storage Manager
You can install LenovoEMC Storage Manager from the Setup Portal, which helps you discover your px4-
300r on your network.
Discovering the px4-300r without the Internet
You can access your px4-300r device without internet access as described by these methods for
Windows PCs or Macs:
Windows 7 and Vista Click Start, Computer, Network. You should see your px4-300r listed
under Other Devices. You can then double-click the device icon to access the px4-300r
Management Console.
Windows XPIf you have not enabled UPnP Discovery, click Start, Help and Support. In the
Help and Support browser, search for UPnP and follow the steps from “Install the UPnP
framework. After UPnP is enabled, open Windows Explorer and in the Folders view, expand My
Network Places. You should see your px4-300r listed. You can then double-click the device icon
to access the px4-300r Management Console.
Mac — Browse to your px4-300r through Finder, Shared, All and use Go, Connect to Server to
connect to Shares on your px4-300r.
Setting up Your px4-300r Network Storage Array
Set up my px4-300r Network Storage Array if it's not discovered 3
Setup Page
The Setup page opens when you first access the px4-300r Network Storage Array from the Home Page or
the LenovoEMC Storage Manager. On this page, you can configure some basic device features by clicking
the appropriate link. The current setting of the feature displays above the link. You can also configure all
features shown on the Setup page by accessing the specific features directly.
Setting up Your px4-300r Network Storage Array
4 Setup Page
Network Connection
Connecting the px4-300r Network Storage Array to Your Network
First, check the package contents.
Verify that the box contains the following items:
1. px4-300r (models may vary)
2. Power Cables
3. Quick Start Guide
4. Ethernet Cable
5. Rail Kit (models may vary)
Package contents may vary.
Setting up Your px4-300r Network Storage Array
Network Connection 5
Connecting the px4-300r
Initial Setup
If you have purchased more than one px4-300r, complete all steps on one device before setting up
additional devices.
6. Make sure at least one hard drive is installed in the px4-300r.
7. Use the included network cable to connect the px4-300r to your network hub or switch.
8. Connect the included power cord to the back of the px4-300r and to an Uninterruptible Power
Supply (UPS).
9. Power on the px4-300r.
10. From a computer on your network, open a web browser and go to http://setup.lenovoemc.com to
set up your px4-300r on your network. For best results, use a computer that is connected to the
same subnet or network segment as the px4-300r.
You can access the px4-300r Management Console directly by entering the IP address or model
name of your px4-300r in your computer’s web browser. To use the model name on a Mac, add
.local after the name in the browser (for example, px4-300r.local).
11. OPTIONAL: if desired, install the LenovoEMC Storage Manager and Media Aggregation software.
If you install LenovoEMC Storage Manager, its icon will appear in the System Tray (Windows) or
Menu Bar (Mac). The LenovoEMC Storage Manager will automatically scan your network and
connect to available Shares.
If you receive a message from your operating system's firewall alerting you of network activity, be
sure to unblock communications.
Mac Users: Shares on the px4-300r will mount and appear on the Mac Desktop.
PC Users: Shares on the px4-300r will automatically be assigned a drive letter and will be
available in the Network Drives section under My Computer.
Network Settings
The Network page of your px4-300r is where you make changes to set up network connectivity. The
Network page displays your current network settings and enables those settings to be modified. On this
page, you can identify your DNS servers and WINS servers and how your system's IP address is
determined. Most system IP addresses and other network settings can normally be configured
automatically.
Manually Configuring Your Network
If you are comfortable with network technology and want to configure the network, refer to Manually
Configuring Network Settings.
Bonded NICs
If your px4-300r has multiple network interface cards (NICs), you can bond those NICs. Refer to Bonding
NICs.
Setting up Your px4-300r Network Storage Array
6 Network Connection
Enabling Jumbo Frames for Each NIC
You can enable jumbo frames for each NIC in your px4-300r by expanding the Information section for a
NIC and entering a jumbo frame size in the Jumbo Frame field. If you do not want jumbo frame support,
leave the field blank. Jumbo frame support is useful for transferring large files, such as multimedia files,
over a network. Jumbo frame support increases transfer speed by placing large files in fewer data packets.
It also reduces the demand on the device hardware by having the CPU process more data in fewer data
packets.
Jumbo frame support should only be enabled if you are sure your network is jumbo-frame compatible and
all network devices have been configured to support jumbo frames. It is recommended that you confirm all
network interface cards (NICs) are configured to support jumbo frames before enabling this feature.
VLAN
Each NIC in your px4-300r can be added to up to four Virtual LANs (VLAN). For more information on adding
a NIC to a VLAN, refer to VLAN Settings.
Manually Configuring Network Settings
There are various settings in the network setup that you can manually configure.
1. Click Modify network settings.
2. Uncheck Automatically configure DNS, WINS, and all IP addresses (DHCP).
3. DNS Serversenter the IP addresses of the DNS (Domain Name System) servers. DNS is
used for translating the domain name to IP addresses.
4. WINS Serversenter the IP addresses of the WINS server.
5. From the Bonding Mode drop-down menu, choose one of the following:
Transmission Load Balance increases bandwidth by distributing the load across multiple
NICs.
Link Aggregation — increases bandwidth by distributing the load across multiple ports in a
switch. Link Aggregation requires an 802.3ad compatible switch.
Failover provides recovery from a failure, so if one NIC should fail, your system still has
network connectivity with the other NIC.
6. To connect your px4-300r to a proxy server, check Use proxy settings and enter proxy IP
address, port number, and the proxy username and password.
7. Click Apply to save your settings.
8. If a DHCP server is unavailable for a network interface card (NIC), the device could auto-assign
an IP address, or you can uncheck the Automatically acquire network address (DHCP)
checkbox found in the Information section of a NIC.
9. You can change the following settings in the Information section:
IP Address the static IP address of the px4-300r. Use an available IP address in the range
used by the LAN.
Subnet Mask the subnet that the IP address belongs to. The default value is 255.255.255.0.
Gatewayenter the gateway IP address in this field.
10. Click Apply to save your settings.
Setting up Your px4-300r Network Storage Array
Network Connection 7
VLAN: For information on adding a NIC to a VLAN (Virtual LAN), refer to VLAN Settings.
Bonding NICs: For information on bonding multiple network interface cards (NICs), refer to Bonding
NICs.
Bonding NICs
Bonding network interface cards (NICs) is a way to provide redundancy for your px4-300r on the network.
If one NIC should fail, your px4-300r will remain accessible on the network if that NIC is bonded to others.
Depending on the bonding mode selected, it can also increase bandwidth. See Manually Configuring
Network Settings for information on bonding mode options and how to change the bonding mode.
You can bond two or more network interface cards (NICs) in your px4-300r by selecting the NICs and
clicking Apply.
Use the following procedure to bond NICs.
1. On the Network page, expand the NIC number and then expand the Bond Network Interface
section.
2. Check the checkboxes next to the NICs that you want to bond to the selected NIC. For example, if
you selected NIC 1, and your configuration includes four NICs, you could bond NIC 1 to NIC 2, 3,
and/or 4.
3. Click Apply to save your settings.
4. The section updates and displays the NICs that are bonded to the selected NIC.
Unbonding NICs
1. To unbond a NIC, uncheck the box next to the bonded NIC.
2. Click Apply to save your settings.
VLAN Settings
A VLAN (Virtual Local Area Network) is a network of devices that are joined into one broadcast domain,
even if the devices are not physically connected to each other. VLANs are useful for creating smaller
networks within a larger LAN; for example, a legal department in a company might be on its own VLAN
because it has sensitive documents that only certain personnel should have access to. The smaller
networks that VLANs create do not require any additional physical resources, such as additional cabling.
Your px4-300r Network Storage Array can be configured to support VLANs by connecting the
corresponding physical NIC to the trunk port of an L2/L3 switch.
VLAN is configured for each NIC, but it is not supported on bonded NICs. If a NIC is bonded, you must
unbind it first to configure it for a VLAN.
Adding a VLAN
1. To add a VLAN, expand the VLAN Settings section of a NIC.
2. Click Add VLAN.
3. Enter a VLAN ID value between 2 and 4094. You can enter up to 4 VLAN IDs for each NIC. A
VLAN can obtain its network settings from DHCP, or you can uncheck DHCP and enter the IP
address, subnet mask, and gateway manually.
4. Refer to Network Settings on page 6 for information about jumbo frames.
Setting up Your px4-300r Network Storage Array
8 Network Connection
5. Click Apply to save your changes.
Deleting a VLAN
In the VLAN Settings section click Delete to delete the VLAN.
Setting up Your px4-300r Network Storage Array
Network Connection 9
Naming Your px4-300r Network Storage Array
You can provide a meaningful name for your px4-300r using the Device Identification page. This page in
the px4-300r Management Console enables you to change the Storage Device Name, the Storage Device
Descriptive Name, and the Workgroup Name.
Change any of these by editing the text fields. Click Apply to save your changes.
Device Name: Enter a name for the px4-300r device. Use a name that will help you identify it on
your network.
Device Descriptive Name: Enter a descriptive name for the px4-300r device. This name can
provide additional detail that identifies the device. If you leave this field blank, the default device
name is used.
Workgroup Name: Enter a workgroup name for the px4-300r device if you need to change the
default name. The workgroup name identifies a group of computers that share information with
each other. Change the workgroup name only if you explicitly define a workgroup on your network.
Most users won't need to change the workgroup name, unless they have explicitly defined a
different workgroup on their other computers.
Renaming the px4-300r will require a device restart.
Setting up Active Directory
If your px4-300r supports Active Directory, you configure AD on the Device Identification page. Refer to
Configuring Your px4-300r for Active Directory.
Setting up Your px4-300r Network Storage Array
10 Naming Your px4-300r Network Storage Array
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165

Lenovo Px4-300r User manual

Category
Routers
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI