Wacom Intuos 2 Windows Owner's manual

Help

Contents Back

>>

Customizing

Opening the Control Panel

Control Panel Features

Tabs

Control Panel Lists

Control Panel Buttons

Customizing Your Tools

Pen and Airbrush Tabs

2D Mouse and 4D Mouse Tabs

Customizing Pen and Airbrush Settings

Adjusting Tip Feel

Adjusting Double-Click

Customizing Tool Buttons

Button Functions

Airbrush Settings

Adjusting Eraser Feel

Customizing Tilt Sensitivity

Customizing Mouse Tool Settings

Customizing the 2D Mouse

Customizing the 2D Mouse Fingerwheel

Customizing the 4D Mouse and Lens Cursor

Programming the 4D Mouse and Lens Cursor

Creating a Button Box

Customizing the 4D Mouse Fingerwheel

Tablet to Screen Mapping

Positioning Mode

Orientation

Aspect

Tablet Area

Display Area

Customizing the Pop-up Menu

Add Macros

Add Keystrokes

Setting Mouse Speed

Add Mapping Options

Removing Pop-up Menu Options

Customizing Tablet Buttons

Working with Multiple Tools

Adding a New Tool

Using More Than One Tool

Working with Application-Speciﬁc Settings

Creating an Application-Speciﬁc Setting

Adding Additional Tools to an Application’s Tool List

Changing Settings for a Speciﬁc Application and Tool

Removing Application-Speciﬁc Settings

Checking Your USB Tablet Mode

Pull-Down Menus

File

Edit

Add

Remove

Language

Help

Advanced Features

Advanced Tip Pressure Settings

Click Force Adjustment

Pressure Curve Adjustment

Advanced Eraser Pressure Settings

Copying Settings

Using DualTrack

Advanced Mapping

Help

Contents Back

<< >>

OPENING THE CONTROL PANEL

To open the control panel in OS X:

1. In the F

INDER

, select the G

O

menu and choose A

PPLICATIONS

.

2. Open the W

ACOM

folder and double-click on the tablet icon.

To open the Wacom control panel,

double-click here with the tool you

wish to customize.

To open the control panel in OS 8 and 9:

Open the control panel with the Intuos2 tool you wish to

customize.

1. Using your Intuos2 tool, open the Apple menu and choose C

ONTROL PANELS.

2. Double-click on the tablet icon.

Help

Contents Back

<< >>

CONTROL PANEL FEATURES

Use the Wacom control panel to customize your Intuos2 Professional Graphics Tablet.

The Pull-Down Menus access many control panel features.

Tabs display

settings for the

selected application

and selected tool.

The Help button

displays online

Help.

Tab buttons

apply only to the

selected tab.

These buttons add an application

or tool to the lists at the left.

The Application List

displays applications

with customized

settings.

The Tool List

displays tools that

are customized for

the above selected

application.

Help

Contents Back

<< >>

TABS

The tabs allow you to customize your Intuos2 tablet and tools. When you open the control panel with an

Intuos2 tool, the tool is automatically selected in the T

OOL

L

IST

and the appropriate tabs are displayed.

If the T

OOL

L

IST

has more than one tool, you can select a different tool to customize and the appropriate

tabs will display for that tool.

Note:

The A

PPLICATION

L

IST

is for advanced users; it is not necessary to select or add applications to

customize your Intuos2 tool(s).

These tabs are displayed for the Intuos2 Pen or Airbrush.

Help

Contents Back

<< >>

Tab buttons apply only to the selected tab:

• To set the currently open tab to its factory default values, click

• If you have changed settings on a tab and want to return the tab to the last state when the control

panel was opened, click

• To copy settings from one tool or application to another, click This will display the

Cop

y Settings To... dialog box.

As you explore the control panel tabs, experiment with different settings to ﬁnd what works best for you.

You can always click R

ESET

T

AB

TO

D

EFAULT

to return to the factory settings. Or, click R

EVERT

T

AB

to

return a tab to the last state when the control panel was opened. Refer to Customizing

Your Tools for

detailed information on working with tabs.

Help

Contents Back

<< >>

CONTROL PANEL LISTS

Located in the upper portion of the control panel, the A

PPLICATION

L

IST

and T

OOL

L

IST

allow you to create

different tablet and tool settings for individual applications. For example, you might set your pen tip for a

soft feel in Painter and a ﬁrm feel in all other applications.

Click to add an installed application to the

APPLICATION LIST. You can customize tool

settings for the selected application.

Click to add an Intuos2 tool to

the TOOL LIST. You can

customize the tool for the

above selected application.

The APPLICATION LIST displays applications that

have custom tool settings associated with them.

The TOOL LIST displays tools

that can be customized for the

application selected above.

Your current selections are

highlighted. Wedges emphasize the

relationship between tab settings and

the selected tool and application.

Help

Contents Back

<< >>

• When you ﬁrst install your Intuos2 Professional Graphics Tablet, the A

PPLICATION

L

IST

displays the A

LL

A

PPLICATIONS

icon. This contains tablet and tool settings for all of your applications.

• The T

OOL

L

IST

displays an icon for each Intuos2 tool that has been used on the tablet. Each Intuos2

tool that is used on the tablet will automatically appear in the Tool List. However, the Wacom control

panel settings must be saved before a tool is permanently added to the list. See Adding a Ne

w Tool for

more information.

When you are ready to create custom settings for individual applications, see W

orking with Application-

Speciﬁc Settings.

CONTROL PANEL BUTTONS

The control panel buttons are common to the entire control panel.

• To exit the control panel, either click on the close box (located on the window title bar), or select Q

UIT

or

C

LOSE

from the F

ILE

menu.

• To display online Help for the control panel, click Or, you can choose H

ELP

... from the H

ELP

pull-

down menu.

Balloon Help, which provides quick information and useful tips, is also available for most control panel

items. To access balloons, turn them on by selecting S

HOW

B

ALLOONS

from the H

ELP

menu. Help for

individual dialog boxes is available by clicking on the button in the speciﬁc dialog box.

Help

Contents Back

<< >>

CUSTOMIZING YOUR TOOLS

To change tool settings, open the control panel using the tool you wish to customize. The tool will

automatically be selected in the T

OOL

L

IST

, and the appropriate tabs will be displayed. To customize

settings for a different tool, select it from the T

OOL

L

IST

by clicking on its icon. Note that the P

OP

-

UP

M

ENU

,

T

ABLET

B

UTTONS

, and T

ABLET

M

ODE

tab settings are not tool-speciﬁc and changes apply to all tools.

PEN AND AIRBRUSH TABS

If the selected tool is an Intuos2 Grip Pen or Airbrush, the following tabs are displayed:

2D MOUSE AND 4D MOUSE TABS

If the selected tool is a 2D Mouse or 4D Mouse, the following control panel tabs are displayed:

Help

Contents Back

<< >>

CUSTOMIZING PEN AND AIRBRUSH SETTINGS

Customizing your Wacom input tool is easy. First open the Wacom control panel using the tool you wish to

customize. The tool will be selected in the T

OOL

L

IST

, and the appropriate tabs will be displayed. Select a

tab and change settings using the available options. To customize settings for a different tool, select it

from the T

OOL

L

IST

by clicking on its icon.

ADJUSTING

TIP FEEL

ADJUSTING DOUBLE-CLICK

CUSTOMIZING TOOL BUTTONS

ADJUSTING ERASER FEEL

CUSTOMIZING TILT SENSITIVITY

Help

Contents Back

<< >>

ADJUSTING TIP FEEL

To adjust the sensitivity of your Intuos2 Pen or Airbrush tip, select the T

IP

F

EEL

tab. To create broad brush

strokes or to click with a light touch, use a soft tip setting. For maximum control while drawing thin lines,

use a ﬁrm tip setting.

Drag the slider to a

softer or ﬁrmer setting.

Make several pen

strokes to test the

current pressure-

sensitivity setting.

Click here with your pen

tip to test the current click

pressure setting.

A checkmark appears when advanced settings are in effect.

Note: For all screen shots of tabs, the tab buttons are omitted in order to save space.

Toggles to the advanced options display.

Help

Contents Back

<< >>

ADJUSTING DOUBLE-CLICK

Double-clicking with the pen tip can be made easier by expanding the tap area that accepts a double-click

(the double-click distance) and reducing the speed required to perform a double-click. This can be set in

the D

OUBLE

C

LICK

tab. Because a large double-click distance may adversely affect your brushstrokes in

some drawing applications, Wacom recommends setting a small double-click distance and using the lower

side switch to double-click.

Use custom double-click settings

when checked.

Note: DOUBLE-CLICK ASSIST can

be enabled for some applications

and disabled for others. See

Working with Application-Speciﬁc

Settings for more information.

Enter a number from 1 to 25

pixels or click the up and down

arrows to increase or decrease

double-click distance.

Drag the slider to change the double-click speed.

A slower speed makes double-clicking easier.

Tap twice on this icon with your pen tip to

automatically set double-click distance and speed

based on the way you normally double-click.

Double-click on the target

to test your settings before

applying them.

Help

Contents Back

<< >>

CUSTOMIZING TOOL BUTTONS

Select the T

OOL

B

UTTONS

tab to change the functions assigned to the eraser, side switch, and tip of your

Intuos2 Pen or Airbrush. If you are using an airbrush, you can also customize the ﬁngerwheel sensitivity.

For each tool button, a pull-down menu enables you to choose the function that will be performed.

Select the function to perform

when using the eraser.

Select the function to

perform when pressing

the upper side switch.

Select the function to perform

when pressing the lower side

switch.

Click here to change the function assigned to the pen

tip. The tip must be set to click in order to draw in most

graphics applications.

Help

Contents Back

<< >>

Button Functions

Each button has a pull-down menu that allows you to choose the function that will be performed when the

button is pressed. The following list describes all available functions. However, some options are not

available for all buttons or tools.

•

C

LICK

.

Default setting for the Intuos2 Pen or Airbrush tip. This option simulates a mouse button click.

Be sure at least one button performs this function so you can always navigate and click.

•

D

OUBLE

-C

LICK

.

Default setting for the lower position of the side switch. When this option is selected,

pressing the switch simulates a mouse button double-click. For easier double-clicking, use this

function instead of tapping twice with your pen or airbrush tip.

•

C

LICK

-L

OCK

.

Simulates holding down the mouse button. Press the tool button once to initiate click

lock. Press the button again to release click lock. Click lock is useful for dragging objects or selecting

blocks of text.

Help

Contents Back

<< >>

•

K

EYSTROKE.... Enables you to simulate a series of keystrokes. When you select this option, the

D

EFINE KEYSTROKE dialog box appears. There, you can enter a keystroke or keystroke sequence to

play back. Keystroke combinations can include letters, numbers, function keys (such as F3) and

modiﬁer keys (such as S

HIFT, OPTION, COMMAND, and CTRL). After deﬁning a keystroke sequence,

click OK.

Important:

Because the RETURN key can be selected as a deﬁned keystroke, it cannot be used to

select OK. You must use a tool to click on the OK button.

Help

Contents Back

<< >>

• MODIFIER.... Enables you to simulate modiﬁer key(s) (such as SHIFT, OPTION, COMMAND, and CTRL).

Many applications use modiﬁer keys to constrain the size or placement of objects. If you select this

option, the D

EFINE MODIFIERS dialog box appears. There, you select the modiﬁer key(s) to simulate.

You can select the CLICK box plus

one or more modiﬁer key options

to deﬁne the function you want

your tool button to simulate.

Help

Contents Back

<< >>

• MACRO.... Enables you to play a macro sequence. When you select this option, the SELECT MACRO

dialog box appears. There, you can select a predeﬁned macro to play back. After selecting a macro,

click OK.

Choose the macro type.

Note: Before you can add macros, you must ﬁrst create

them with a third-party macro application, such as QuicKeys



.

Select the macro you wish to use.

Help

Contents Back

<< >>

• PRESSURE HOLD. Sets a button so that, when pressed, the pressure is locked at the current pressure

level until the button is released. For example, you can paint with pressure-sensitivity until you reach

the brush size that you like. You can then press the button and continue painting with the same size

brush until the button is released.

• M

ODE TOGGLE.... Toggles between Pen Mode and Mouse Mode. When ﬁrst setting a tool button to

M

ODE TOGGLE..., the MOUSE SPEED dialog box is displayed where you can adjust the mouse

acceleration and speed.

Sets the screen cursor speed when in MOUSE MODE.

Sets the screen cursor

acceleration when in

MOUSE MODE.

Note: Mouse speed settings can be accessed from a number of different locations

within the control panel. However, for each input tool and application that you are

customizing, only one MOUSE SPEED and ACCELERATION setting can be made.

Help

Contents Back

<< >>

• POP-UP MENU. Displays a Pop-up Menu on your screen. See Customizing the Pop-up Menu for more

information.

• E

RASE. Default setting for the eraser.

• I

GNORED. (Intuos2 Pens and Airbrush only.) Disables the button function.

• A

PPLICATION DEFINED. (2D Mouse, 4D Mouse, or Lens Cursor only.) Only the button number is

reported to your application. Use this setting when using applications that have built-in support for tool

buttons. For example, CAD programs that support tablets can assign their own functions to a button.

Help

Contents Back

<< >>

Airbrush Settings

The Intuos2 Airbrush is equipped with a drawing tip, a ﬁngerwheel, a single side switch, and an eraser.

Button functions are set in the same manner as with the Intuos2 Pen. Additionally, the ﬁngerwheel

sensitivity range can be customized to suit your preference.

In supporting applications, the ﬁngerwheel can be used to control ink ﬂow, brush size, opacity, or other

variables. Reducing the ﬁngerwheel range allows you to achieve the same effect with less ﬁnger

movement. Move the wheel forward for less effect and move it back for more effect.

Visit Wacom’s web site for a list of applications that currently support airbrush features.

MINIMUM requires the least amount of wheel

movement to achieve maximum effect.

INTERMEDIATE requires a medium amount of

wheel movement to achieve maximum effect.

MAXIMUM is the default setting, and requires

you to move the wheel over its full range to

achieve maximum effect.

Help

Contents Back

<< >>

ADJUSTING ERASER FEEL

To adjust the sensitivity of your Intuos2 Pen or Airbrush eraser, select the ERASER FEEL tab. To erase with

a broad stroke or to click with a light touch, use a soft tip setting. For maximum control while erasing, use

a ﬁrm eraser setting.

Drag the slider to a

softer or ﬁrmer setting.

Using your eraser, test

the current eraser

pressure-sensitivity

setting by erasing here.

Toggles to the adv

anced options display.

Check the eraser click

pressure setting by using

the eraser to select and

delete this text.

A checkmark appears when advanced settings are in effect.

Page is loading ...

Wacom Intuos 2 Windows Owner's manual

This manual is also suitable for

Wacom Intuos 2 Windows Owner's manual

Related papers

Other documents