2. Office
  3. Office furniture
  4. Multimedia carts & stands
  5. Atlas Metal Industries
  6. TC-2-S
TC-2-S

Atlas Metal Industries TC-2-S Datasheet

  • Hello! I am an AI chatbot trained to assist you with the Atlas Metal Industries TC-2-S Datasheet. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What are the primary functions of the Atlas Metal Industries TC-2-S?
    How does the TC-2-S improve serving line efficiency?
    What are the material and construction details of the TC-2-S?
    How does the TC-2-S accommodate trays and flatware?
    What safety features does the TC-2-S incorporate?
a subsidiary of Mercury Aircraft
1135 NW 159 Dr., Miami, Florida 33169
Tel: (305) 625-2451 or (800) 762-7565 • Fax: (305) 623-0475
M O D U L A R S E RV I N G S Y S T E M S
BL-17-A
MOBILE TRAY
& SILVER CART
FEATURES
Rugged stainless steel construction
Provided with four (4 ea.) vertical corner bumpers
Large capacity tray storage area
High volume flatware service at a convenient height
DESCRIPTION
This mobile tray and silver cart completes your
serving system, enabling easy access and stor-
age of trays and flatware at the beginning of the
line. The cart can be easily loaded in the clean
dish area and rolled to the serving line save han-
dling, save money.
Fashion-right Atlas units make eating more
pleasurable. The luster of stainless steel creates a
feeling of warmth and cleanliness while the addi-
tion of laminate panels will complement any
existing decor or future fashion trends.
Quality construction, rugged stainless steel for
years of cost efficient, trouble free service.
Complete flexibility - use as an individual unit or
together with other serving equipment to form a
continuous serving line.
TC-2-S
TC-2-S
Shown with Accessories
Quantity Item No.
a subsidiary of Mercury Aircraft
1135 NW 159 Dr., Miami, Florida 33169
Tel: (305) 625-2451 or (800) 762-7565 • Fax: (305) 623-0475
BL-18-A
TOP: Constructed of 18 gauge, type 304
stainless steel, with all corners heliarc
welded, ground and polished to a uniform
finish. Top to be provided with ten (10 ea.)
4” diameter die stamped openings to
receive nylon silverware cylinders (cylin-
ders by others.) Top is integrally formed into
side panels for the cart.
TRAY SHELF: Constructed of 18 gauge
stainless steel, full-length, and turned up at
the rear of the unit. Bottom is reinforced
with 14 gauge steel plate for proper caster
mounting and is provided with four (4 ea.)
non-marking vertical corner bumpers.
CASTERS: N.S.F. approved, 5” diameter,
non-marking, rubber tired swivel plate
casters with grease fittings. Both casters
on the operator’s side have foot operated
brakes.
Specifications subject to change without
notice.
ACCESSORIES:
Nylon silverware cylinders, ten (10 ea.)
required
Stainless steel napkin shelf
SPECIFICATIONS:
MOBILE TRAY & SILVER CART
TC-2-S
10/08-SC
33”
22 1/2”
42”
14”
Open
/