Lutron CA-1PSH-WH User manual

Category
Dimmers
Type
User manual
Product family features
Large paddle switch with a captive linear-slide
dimmer for a standard designer wallplate opening
Preset dimmer
Select lighter color models feature built-in soft-glow
locator light
C
LTM dimmers offer more reliable dimming
performance over standard dimmers when
dimming CFLs and LEDs; they also provide full
range dimming for incandescent and halogen bulbs
as well as mixed loads types
C
L dimmers feature HEDTM Technology with
advanced dimming circuitry designed for
compatibility with most high-efficacy light bulbs
eco-dim® model available
1000 W preset dimmers have voltage compensation,
which maintains stable light levels, despite line
voltage variations
Coordinating Claro®, Satin Colors® and Stainless
Steel wallplates only available separately
Custom engraving available for wallplates,
see pg. 155
Control types
Single-pole (one location)
3-way or 4-way (two or more locations)
Direct load type compatibility
Incandescent/halogen lighting
Magnetic low-voltage lighting
Electronic low-voltage lighting
Fluorescent lighting
LED lighting
Dimmable CFL/LED lighting (screw-base)
Ceiling fans
Load type requiring load interface
Neon/cold cathode lighting
Lighting load interfaces may be applicable
for some additional load type, voltage and
capacity combinations.
For additional information, see pg. 174.
Shown actual size: Diva preset dimmer and
1-gang Claro
® wallplate in White (WH).
.30 in
(7.6 mm)
profile
2.94 in (75 mm)
4.69 in (119 mm)
Diva® dimmers and fan controls
Designer
wallplate opening
86
www.lutron.com | 1.800.523.9466 |
WH
White
LA
Light Almond
AL
Almond
IV
Ivory
GR
Gray
BR
Brown
BL
Black
SW
Snow
LS
Limestone
BI
Biscuit
ES
Eggshell
PD
Palladium
TP
Taupe
ST
Stone
BG
Bluestone
PL
Plum
SG
Sea Glass
TQ
Turquoise
GS
Goldstone
DS
Desert Stone
GB
Greenbriar
MS
Mocha Stone
TC
Terracotta
SI
Sienna
HT
Hot
MR
Merlot
MN
Midnight
SS
Stainless Steel
Diva® dimmers and fan controls
Designer
wallplate opening
87
www.lutron.com | 1.800.523.9466 |
Satin finishes
*
Available finishes
Use BOLD color code in model number (Example: DV-600P-BR)
Gloss finishes*
*Coordinating wallplates only available separately. For wallplate information, see pg. 160.
Stainless Steel wallplate includes black plastic trim/adapter, visible from side. Match with separate
Black (BL) or Midnight (MN) controls.
88
www.lutron.com | 1.800.523.9466 |
Switches
Paddle turns on/off
Use with any 15 A load
General purpose
switching of all sources
and motor loads
Available with locator light
Dimmers
Fan controls and switches
Dimmers
Paddle turns on/off
Slide up to brighten;
down to dim
Locator light shines
through paddle on select lighter
colored models
C
LTM models provide more reliable
dimming for screw-base CFL and
LED lighting loads
eco-dim® model guarantees
at least 15% energy savings
compared to a standard switch
Fan controls
Paddle turns on/off
Slide up to increase speed;
down to decrease speed
Three quiet fan speeds for
increased comfort
For use with only one ceiling
paddle fan
Does not include locator light
Designed to prevent motor hum
Diva® dimmers and fan controls
Designer
wallplate opening
Connections overview
Load connections*
Control types (for 2 or more locations)
Dim from one location, switch from the others
3-way
Dimmer
3-way
Switch
Light
Source
3-way
Dimmer
4-way
Switch
(1 or more)
3-way
Switch
Light
Source
Incandescent/
Halogen
eco-dim
®
Dimmer
Incandescent/
Halogen
Dimmer
Fluorescent
Dimmer
Fluorescent
Lighting
Lutron®
Dimming
Ballasts
LED
Fluorescent
Dimmer
(3-wire only)
Lutron
Hi-lume
®
LED Driver
Fan
Control
Ceiling
Fan
89
www.lutron.com | 1.800.523.9466 |
Magnetic
Low-Voltage
MLV
Dimmer
MLV
Transformer
(by others)
Electronic
Low-Voltage
ELV
Dimmer
ELV
Transformer
(by others)
Diva® dimmers and fan controls
Designer
wallplate opening
Switch
Switched
Lighting/Fans
For more information on ballasts, visit www.lutron.com/ballasts.
For more information on LED drivers, visit www.lutron.com/LED.
*For illustration purposes only. Consult model number pages for specific voltage and
capacity information.
Screw-base
CFL/LED
C
L
Dimmer
C
LTM
Dimmer
90
www.lutron.com | 1.800.523.9466 |
Dimmer model numbers
Incandescent/halogen dimmers
Dimmers
Single-pole DV-600P-CC
3
120 V 600 W DVSC-600P-CC
4
Single-pole DV-10P-CC
3
120 V 1000 W DVSC-10P-CC
4
3-way DV-603P-CC
3
120 V 600 W DVSC-603P-CC
4
3-way DV-103P-CC
3
120 V 1000 W DVSC-103P-CC
4
3-way/single-pole DVCL-153P-CC
3
120 V 600 W
3-way/single-pole DVSCCL-153P-CC
4
120 V 600 W
Refer to the “how to calculate wattage when
mixing lamp types” table on, www.lutron.com/
dimcflled, when using a combination of bulb
types with the C
LTM dimmer.
eco-dim
® dimmer with locator light
3-way/single-pole DV-603PG-EE
2
120 V 600 W
eco-dim model guarantees at least 15% energy
savings compared to a standard switch.
Dimmable CFL bulbs (screw-base)
Dimmable LED bulbs (screw-base)
Dimmers
3-way/single-pole DVCL-153P-CC
3
120 V 150 W
3-way/single-pole DVSCCL-153P-CC
4
120 V 150 W
Refer to the “how to calculate wattage when
mixing lamp types” table on, www.lutron.com/
dimcflled, when using a combination of bulb
types with the C
L dimmer.
Visit www.lutron.com for an approved list of
dimmable CFL/LED bulbs.
Magnetic low-voltage dimmers
Dimmers
Single-pole DVLV-600P-CC
3
120 V 600 VA (450 W) DVSCLV-600P-CC
4
Single-pole DVLV-10P-CC
3
120 V 1000 VA (800 W) DVSCLV-10P-CC
4
3-way DVLV-603P-CC
3
120 V 600 VA (450 W) DVSCLV-603P-CC
4
3-way DVLV-103P-CC
3
120 V 1000 VA (800 W) DVSCLV-103P-CC
4
The stated VA (Volt-Ampere) rating includes
the magnetic transformer heat losses and the
lamp load. The stated W (Watt) rating is the
maximum lamp wattage based on assumed
20% transformer loss.
All models must be derated if ganged unless
otherwise noted, see pg. 170.
Diva® dimmers and fan controls
Designer
wallplate opening
CC
3
: Gloss color codes, see pg. 87
CC
4
: Satin color codes, see pg. 87
EE
2
: Available in White (WH), Ivory (IV), Almond
(AL) and Light Almond (LA)
(Wallplates not included with above, order
separately, see pg. 160)
91
www.lutron.com | 1.800.523.9466 |
Dimmer model numbers
Electronic low-voltage dimmers*
Dimmers
Single-pole DVELV-300P-CC
3
120 V 300 W DVSCELV-300P-CC
4
3-way DVELV-303P-CC
3
120 V 300 W DVSCELV-303P-CC
4
Only certain LED drivers are dimmable using an
ELV dimmer, visit www.lutron.com/LED for
more information.
3-wire fluorescent dimmers*
Dimmers
3-way/single-pole DVF-103P-CC
3
120 V 8 A DVSCF-103P-CC
4
3-way/single-pole DVF-103P-277-CC
3
277 V 6 A DVSCF-103P-277-CC
4
For use with Hi-lume®, Hi-lume® Compact SE,
Hi-lume
® 3D, Eco-10®, EcoSystem® ballasts.
Also compatible with Hi-lume
® LED driver.
No derating required if ganged.
Adjustable low-end trim.
0-10 V dimmers
(current sink control)
Dimmers
Single-pole DVTV-CC
3
30 mA max control current
Single-pole DVSCTV-CC
4
30 mA max control current
Control provides dimming signal only. For
dimming with on/off switching, use with Lutron
PowerPack: PP-120H, PP-277H or PP-347H.
Consult ballast manufacturer for specific ballast
current draw to determine maximum number of
ballasts per control.
For compatible 0-10 V LED drivers by others,
visit www.lutron.com/LED.
No derating required if ganged.
Adjustable high-end and low-end trim.
Tu-Wire® fluorescent dimmers
Dimmers
3-way/single-pole DVFTU-5A3P-CC
3
120 V 5 A DVSCFTU-5A3P-CC
4
Also compatible with Advance Mark X
ballasts, for further information visit
www.lutron.com/advance.
For information on use with Universal and
OSRAM ballasts, contact Technical Support
at 1.800.523.9466.
All models must be derated if ganged unless
otherwise noted, see pg. 170.
For more information on Lutron ballasts, visit
www.lutron.com/ballasts.
*Requires neutral wire connection.
Diva® dimmers and fan controls
Designer
wallplate opening
CC
3
: Gloss color codes, see pg. 87
CC
4
: Satin color codes, see pg. 87
(Wallplates not included with above, order
separately, see pg. 160)
92
www.lutron.com | 1.800.523.9466 |
Dimmer model numbers
Fan control and switch model numbers
Hi-lume® LED drivers:
3-wire fluorescent dimmers*
Dimmers
3-way/single-pole DVF-103P-CC
3
120 V 8 A DVSCF-103P-CC
4
3-way/single-pole DVF-103P-277-CC
3
277 V 6 A DVSCF-103P-277-CC
4
Exclusively compatible with Hi-Lume LED driver
For more information on Hi-lume LED drivers,
visit www.lutron.com/HilumeLED.
No derating required if ganged.
Adjustable low-end trim.
0-10 V LED dimmers:
0-10 V dimmers
(current sink control)
Dimmers
Single-pole DVTV-CC
3
30 mA max control current
Single-pole DVSCTV-CC
4
30 mA max control current
Control provides dimming signal only. For
dimming with on/off switching, use with Lutron
PowerPack: PP-120H, PP-277H or PP-347H.
Consult ballast manufacturer for specific ballast
current draw to determine maximum number of
ballasts per control.
For compatible 0-10 V LED drivers by others,
visit www.lutron.com/LED.
No derating required if ganged.
Adjustable high-end and low-end trim.
Fan controls
Fan controls—quiet 3-speed
3-way/single-pole DVFSQ-F-CC
3
120 V 1.5 A DVSCFSQ-F-CC
4
3-way/single-pole DVFSQ-F-HO-CC
3
120 V 2.0 A
DVFSQ-F-HO model for use with specific fans
such as Hunter Original Series.
Does not include built-in locator light.
No derating required if ganged.
Switches
General purpose switches
Single-pole CA-1PSH-CC
3
120/277 V 15 A SC-1PS-CC
4
3-way CA-3PSH-CC
3
120/277 V 15 A SC-3PS-CC
4
4-way CA-4PSH-CC
3
120/277 V 15 A SC-4PS-CC
4
General purpose switches with locator light
Single-pole CA-1PSNL-EE
2
120 V 15 A SC-1PSNL-EE
10
3-way CA-3PSNL-EE
2
120 V 15 A SC-3PSNL-EE
10
4-way CA-4PSNL-EE
2
120 V 15 A SC-4PSNL-EE
10
No derating required if ganged.
All models must be derated if ganged unless
otherwise noted, see pg. 170.
*Requires neutral wire connection.
Diva® dimmers and fan controls
Designer
wallplate opening
CC
3
: Gloss color codes, see pg. 87
CC
4
: Satin color codes, see pg. 87
EE
2
: Only available in Almond (AL), Ivory (IV),
Light Almond (LA) and White (WH)
EE
10
: Available in Biscuit (BI), Eggshell (ES),
Goldstone (GS), Limestone (LS), Sea Glass
(SG) and Snow (SW)
(Wallplates not included with above, order
separately, see pg. 160)
4.75 in (121 mm)
4.69 in (119 mm)
Accessories
Wallplates
Coordinated electrical devices
93
www.lutron.com | 1.800.523.9466 |
Diva® dimmers and fan controls
Designer
wallplate opening
Tamper resistant
GFCI receptacle
Customizable
6-port frame
Cable jack
For more information
about coordinated
Designer electrical
devices, see pg. 163.
.30 in
(7.6 mm)
profile
Shown actual size:
2-gang Claro
® wallplate
in White (WH).
For more information
about Designer wallplates,
see pg. 160.
4.75 in (121 mm)
4.69 in (119 mm)
Shown actual size:
Maestro dimmers
and 2-gang Claro
wallplate in White (WH).
.30 in
(7.6 mm)
profile
Product family features
Can be used in conjunction with the
following dimmer(s) and switch(es):
Maestro
®, Maestro IR®, Maestro Wireless®,
Pico
TM wireless control, Spacer System®,
Diva
®, Lyneo® Lx, Skylark®, Skylark ContourTM
All Lutron® wallplates are screwless, seamless
and have no visible hardware; the front plate
securely snaps into the alignment adapter plate
Full line of wiring devices in designer style opening
Blank inserts available for Gloss colors (DV-BI-) and
Satin colors (SC-BI-)
Customize your designer wallplate with engraving,
contact customer service to get started at
1.888.LUTRON1
Wallplates and accessories | Designer | Claro®/Satin Colors®
Ganging and derating
Designer wallplates use standard ganging
Requires fins to be removed from dimmers for
proper spacing (“Fins Broken” ganging),
see pg. 170
May require derating (i.e., reduction of dimmer
capacity due to fin removal), see Derating
Tables, pg. 172
160
www.lutron.com | 1.800.523.9466 |
161
www.lutron.com | 1.800.523.9466 |
WH
White
LA
Light Almond
AL
Almond
IV
Ivory
GR
Gray
BR
Brown
BL
Black
SW
Snow
LS
Limestone
BI
Biscuit
ES
Eggshell
PD
Palladium
TP
Taupe
ST
Stone
BG
Bluestone
PL
Plum
SG
Sea Glass
TQ
Turquoise
GS
Goldstone
DS
Desert Stone
GB
Greenbriar
MS
Mocha Stone
TC
Terracotta
SI
Sienna
HT
Hot
MR
Merlot
MN
Midnight
SS
Stainless Steel*
Wallplates and accessories | Designer | Claro®/Satin Colors®
Available finishes
Use BOLD color code in model number (Example: SC-1-PL)
Gloss finishes
Satin finishes
*Stainless Steel finish wallplates include black plastic trim/adapter, visible from side. Match with separate
Black (BL) or Midnight (MN) controls and accessories.
Wallplates for Maestro®, Maestro IR®, Maestro Wireless®, PicoTM wireless control, Spacer System®,
Diva
®, Lyneo® Lx, Skylark® and Skylark ContourTM
1-gang* CW-1-CC
2
SC-1-CC
4
W: 2.94 in (75 mm); H: 4.69 in (119 mm)
D: .30 in (7.6 mm)
2-gang* CW-2-CC
2
SC-2-CC
4
W: 4.75 in (121 mm); H: 4.69 in (119 mm);
D: .30 in (7.6 mm)
5-gang* CW-5-CC
2
SC-5-CC
4
W: 10.18 in (259 mm); H: 4.69 in (119 mm);
D: .30 in (7.6 mm)
Multiple devices with line and low-voltage can
be mounted behind a common wallplate using
a standard barrier backbox, see Application
Note #213 (Combining Low-Voltage and Line
Voltage Wiring Devices in a Multi-Gang Box) at
www.lutron.com/applicationnotes.
3-gang* CW-3-CC
2
SC-3-CC
4
W: 6.56 in (167 mm); H: 4.69 in (119 mm);
D: .30 in (7.6 mm)
4-gang* CW-4-CC
2
SC-4-CC
4
W: 8.37 in (213 mm); H: 4.69 in (119 mm);
D: .30 in (7.6 mm)
Multi-gang dimmer installations may require
derating, see pg. 170.
*Stainless Steel finish wallplates include black
plastic trim/adapter, visible from side. Match
with separate Black (BL) or Midnight (MN)
controls and accessories.
Wallplates and accessories | Designer | Claro®/Satin Colors®
CC
2
: Gloss and Stainless Steel color codes,
see pg. 161
CC
4
: Satin color codes, see pg. 161
162
www.lutron.com | 1.800.523.9466 |
Single cable jack* CA-CJH-CC
3
SC-CJ-CC
4
Tamper resistant receptacles
15 A, 125 V* CARS-15-TR-CC
3
SCRS-15-TR-CC
4
20 A, 125 V* SCRS-20-TR-CC
4
Receptacles
15 A, 125 V* CAR-15 H-CC
3
SCR-15-CC
4
20 A, 125 V* SCR-20-CC
4
Tamper resistant GFCI receptacles
15 A, 125 V* GFCI CAR-15-GFTR-CC
3
SCR-15-GFTR-CC
4
20 A, 125 V* GFCI SCR-20-GFTR-CC
4
Cable jacks
F-style, 75-Ohm coaxial cable
GFCI Receptacles
Press test button to confirm LED
indicator status
Press reset button to reset GFCI
after circuit interruption
Single telephone jack* CA-PJH-CC
3
SC-PJ-CC
4
Telephone jacks
6-conductor telephone jack, RJ11
Receptacles
6-gang* CW-6-CC
2
SC-6-CC
4
W: 12.00 in (305 mm); H: 4.69 in (119 mm);
D: .30 in (7.6 mm)
*Stainless Steel finish only available as separate
wallplate. Match with separate Black (BL) or
Midnight (MN) controls and accessories.
163
www.lutron.com | 1.800.523.9466 |
Wallplates and accessories | Designer | Claro®/Satin Colors®
CC
2
: Gloss and Stainless Steel color codes,
see pg. 161
CC
3
: Gloss color codes, see pg. 161
CC
4
: Satin color codes, see pg. 161
Duplex for dimming use
15 A 120/125 V* CAR-15-DFDU-CC
2
15 A 120/125 V* SCR-15-DFDU-CC
4
20 A 120/125 V* CAR-20-DFDU-CC
2
20 A 120/125 V* SCR-20-DFDU-CC
4
Split duplex (half for dimming use)
15 A 120/125 V* CAR-15-HFDU-CC
2
15 A 120/125 V* SCR-15-HFDU-CC
4
20 A 120/125 V* CAR-20-HFDU-CC
2
20 A 120/125 V* SCR-20-HFDU-CC
4
Receptacles for dimming use
Duplex for dimming both
connected loads
Projecting nubs prevent
standard plugs from
being used
Requires replacement
plugs for dimming use
Receptacles for dimming use
Top half for dimming
Projecting nub prevents
standard plug from being used
Requires replacement plugs for
dimming use
Bottom half is a general use
receptacle and will fit standard
duplex plugs
Wallplates and accessories | Designer | Claro®/Satin Colors®
CC
2
: Gloss color code and Stainless Steel,
see pg. 161
CC
4
: Satin color codes, see pg. 161
*Stainless Steel finish only available as separate
wallplate. Match with separate Black (BL) or
Midnight (MN) controls and accessories.
164
www.lutron.com | 1.800.523.9466 |
Dual dimming tamper resistant
15 A 120/125 V* CAR-15-DDTR-CC
2
15 A 120/125 V* SCR-15-DDTR-CC
4
20 A 120/125 V* CAR-20-DDTR-CC
2
20 A 120/125 V* SCR-20-DDTR-CC
4
Half dimming tamper resistant
15 A 120/125 V* CAR-15-HDTR-CC
2
15 A 120/125 V* SCR-15-HDTR-CC
4
20 A 120/125 V* CAR-20-HDTR-CC
2
20 A 120/125 V* SCR-20-HDTR-CC
4
Receptacles for dimming use
Duplex for dimming both
connected loads
Projecting nubs prevent
standard plugs from
being used
Requires replacement
plugs for dimming use
15 A model shown
Tamper resistant
shutter mechanism
Receptacles for dimming use
Top half for dimming
Projecting nub prevents
standard plug from being used
Requires replacement plugs for
dimming use
Bottom half is a general use
receptacle and will fit standard
duplex plugs
15 A model shown
Tamper resistant
shutter mechanism
Important notes
If the hot and dimmed hot feeds to the split
duplex HFDU are supplied from different circuits or
split-wired with separate switch-legs, a means to
simultaneously disconnect these circuits must be
provided at the panel board where they originate
(NEC 210.7(C) 2002 Edition). A 2-pole circuit
breaker or two single-pole circuit breakers with an
approved handle tie can be used to accomplish
this simultaneous disconnect. Feed-through
dimming panels, which are those without breakers,
are recommended when using the HFDU.
Receptacles and plugs for dimming use are
UL listed for use with all Lutron
® wallbox dimmers
included in this catalog.
If there is only one electrical feed to the receptacle,
then the duplex DFDU must be used.
For detailed information, see Application Notes #91
(Guide to Dimming Table Lamps) and #109 (Guide
to Dimming Portable Lamps via Receptacles) at
www.lutron.com/applicationnotes.
120/125 V RP-FDU-10-WH
White
120/125 V RP-FDU-10-BR
Brown
UL/CSA/NOM regulatory approvals.
Replacement plug for dimming
(use with receptacles on left)
This plug required for use with
Lutron
® receptacles for dimming
use—plug will work in standard
receptacle
Easily replaces the existing plugs
on lamps
CC
2
: Gloss color code and Stainless Steel,
see pg. 161
CC
4
: Satin color codes, see pg. 161
*Stainless Steel finish only available as separate
wallplate. Match with separate Black (BL) or
Midnight (MN) controls and accessories.
Wallplates and accessories | Designer | Claro®/Satin Colors®
164A
www.lutron.com | 1.800.523.9466 |
6-port frame* CA-6PF-CC
3
SC-6PF-CC
4
Field customizable 6-port frame
Shipped with six blanks in
matching colors
Connectors and wallplate
sold separately
Connectors snap in
(no tools required)
Connectors available in
White (WH), unless noted
General purpose switches (120/277 V)
Single-pole 15 A* CA-1PSH-CC
3
SC-1PS-CC
4
3-way 15 A* CA-3PSH-CC
3
SC-3PS-CC
4
4-way 15 A* CA-4PSH-CC
3
SC-4PS-CC
4
General purpose switch with locator light
(120 V only)
Single-pole 15 A* CA-1PSNL-EE
2
SC-1PSNL-EE
10
3-way 15 A* CA-3PSNL-EE
2
SC-3PSNL-EE
10
4-way 15 A* CA-4PSNL-EE
2
SC-4PSNL-EE
10
Switches
Paddle turns on/off
Use with any 15 A load
General purpose switching of all
sources and motor loads
No derating if ganged
165
www.lutron.com | 1.800.523.9466 |
Wallplates and accessories | Designer | Claro®/Satin Colors®
*Stainless Steel finish only available as separate
wallplate. Match with separate Black (BL) or
Midnight (MN) controls and accessories.
CC
3
: Gloss color codes, see pg. 161
CC
4
: Satin color codes, see pg. 161
EE
2
: Only available in Almond (AL), Ivory (IV),
Light Almond (LA) and White (WH)
EE
4
: Only available in White (WH) and Black (BL)
EE
10
: Available in Biscuit (BI), Eggshell (ES),
Goldstone (GS), Limestone (LS), Sea Glass
(SG) and Snow (SW)
Connectors for 6-port frame
Telephone/network jacks
8-conductor, CON-1P-C3-EE
4
RJ45 category 3
8-conductor, CON-1P-C5E-EE
4
RJ45 category 5e
8-conductor, CON-1P-C6-EE
4
RJ45 category 6
Fiber jacks
MT-RJ feed through CON-1F-MTRJ-WH
SC simplex CON-1F-SC-WH
LC non-flush mount CON-1F-LC-WH
ST style CON-1F-ST-WH
Cable jack
F-style, CON-1C-EE
4
75-Ohm coaxial cable
BNC jack
BNC connector, 50-Ohm CON-1B-WH
Connectors only for use with 6-port frame.
Appendix | Multi-ganging and derating
Standard ganging
Ganging is the side-by-side mounting of two
or more dimmers or accessory devices under
a multi-gang wallplate.
Standard multi-gang installation:
Uses standard multi-gang electrical backboxes
Uses standard multi-gang wallplates
Requires fins to be removed from dimmers for
proper spacing (“Fins Broken” ganging)
May require derating (i.e., reduction of dimmer
capacity due to fin removal), see Derating
Tables, pgs. 172–173
Standard ganging for dimmers, switches and accessories
Custom ganging for Architectural
style controls
For Architectural style dimmers and switches,
it is possible to retain the maximum capacity of
dimmers in multi-gang applications via custom
architectural multi-gang:
May require customized, wider-than-
standard wallplates
May require wider-than-standard
electrical backboxes
Allows full capacity (“No Fins Broken”) ganging
Required for Nova® dimmers and for larger width
(high capacity) architectural controls
Visit www.lutron.com/customganging for
additional information
How to understand ganging and derating
Appendix | Multi-ganging and derating
Appendix | Ganging and derating
New Architectural
pg. 148
Vierti
®
Derating Table 1
pg. 172
Maestro
®
Maestro IR®
Maestro Wireless®
Spacer System®
Diva®
Lyneo® Lx
Skylark
®
Skylark ContourTM
Designer
pg. 160
Derating Table 1
pg. 172
Traditional
pg. 166
Abella®
Ceana®
Ariadni®
Glyder®
Rotary
Derating Table 1
pg. 172
Architectural
pg. 152
Vareo
®
Nova Tb®
Derating Table 2
pg. 173
170
www.lutron.com | 1.800.523.9466 |
Appendix | Ganging and derating
Standard ganging and fins broken derating examples:
Custom architectural
wallplate
No ns broken
Full capacity
No ns broken
Full capacity
Standard 1-gang
backbox
Standard 1-gang
architectural wallplate
Standard 2-gang
backbox
Standard 2-gang
architectural wallplate
Standard 3-gang
backbox
Standard 3-gang
architectural wallplate
One Nova Tb
®
dimmer
Two Nova Tb dimmers
“Fins Broken” ganging
Two Nova Tb dimmers
“No Fins Broken” ganging
Three Nova Tb dimmers
“Fins Broken” ganging
One n broken*
Partial derating
Inside: Two ns broken*
Full derating
Outside: One n broken*
Partial derating
= + +
= + +
= + +
+
Custom Architectural ganging example:
Backbox with
chase nipple
= +
171
www.lutron.com | 1.800.523.9466 |
For further information on ganging and derating, visit www.lutron.com/multigang.
*The fins are scored and designed to be removed easily.
172
www.lutron.com | 1.800.523.9466 |
Derating Table 1
New Architectural | Vierti
®
Designer |
Maestro®, Maestro IR®, Maestro Wireless®, Spacer System®, Diva®, Lyneo® Lx, Skylark ContourTM, Skylark®
Traditional | Abella®, Ceana®, Ariadni®, Glyder®, Rotary
No fins broken 1 fin broken 2 fins broken
Incandescent
Dimmers
600 W 500 W 400 W
1000 W 800 W 650 W
Dual dimmers
300 W 250 W 200 W
300 W 250 W 200 W
Magnetic low-voltage
Dimmers
600 VA / 450 W 500 VA / 400 W 400 VA / 300 W
1000 VA / 800 W 800 VA / 650 W 650 VA / 500 W
Electronic low-voltage
Dimmers
300 W 250 W 200 W
500 W 450 W 400 W
600 W 500 W 400 W
Fluorescent
Hi-lume
®/Hi-lume® Compact SE/Eco-10®/EcoSystem®
Vierti 60 ballasts / 6 A 50 ballasts / 5 A 35 ballasts / 3.5 A
Maestro /Spacer System 20 ballasts / 6 A 20 ballasts / 5 A 20 ballasts / 3.5 A
Diva, Skylark, Lyneo Lx and Ariadni no derating no derating no derating
Tu-Wire
®: Spacer System, Diva, Skylark 5 A 4 A 3.3 A
Fan controls
Quiet 7-speed 1.0 A / 300 W 1.0 A / 300 W 1.0 A / 300 W
Quiet 3-speed 1.5 A 1.5 A 1.5 A
Fully variable 5 A 4 A 3 A
Fan/light controls
Quiet 7-speed 1.0 A / 300 W 1.0 A / 300 W 1.0 A / 300 W
Quiet 3-speed
1.5 A / 300 W 1.5 A / 300 W 1.5 A / 300 W
1.5 A / 360 W 1.5 A / 360 W 1.5 A / 360 W
Fully variable
2.5 A / 300 W 2.1 A / 250 W 1.7 A / 200 W
Electronic switches
Vierti 6 A / 3 A 5 A / 3 A 3.5 A / 3 A
Maestro (light/fan) 8 A / 3 A 6.5 A / 3 A 5 A / 3 A
Abella (light/fan) 6 A / 3 A 5 A / 3 A 3.5 A / 3 A
Appendix | Multi-ganging and deratingAppendix | Multi-ganging and derating
Appendix | Ganging and derating
For further information on ganging Nova®, visit www.lutron.com/customganging.
1
PowerPack required for line voltage switching.
2
VETS-R-Auxiliary electronic tapswitches do not require derating.
No fins broken 1 fin broken 2 fins broken
Incandescent
Dimmers
600 W 500 W 300 W
1000 W 900 W 700 W
1500 W 1250 W 1000 W
1950 W
Magnetic low-voltage
Dimmers
600 VA / 450 W 500 VA / 400 W 300 VA / 250 W
1000 VA / 800 W 900 VA / 750 W 700 VA / 500 W
1500 VA / 1200 W 1250 VA / 1000 W 1000 VA / 800 W
Electronic low-voltage
Dimmers
300 W 300 W 250 W
600 W 500 W 400 W
Fluorescent
Hi-lume
®/Hi-lume® Compact SE/Eco-10®/EcoSystem®
Vareo 20 ballasts / 8 A 20 ballasts / 6 A 20 ballasts / 4.5 A
Nova Tb
6 A no derating no derating
8 A no derating no derating
16 A no derating no derating
0-10 VDC control
1
30 mA ballasts no derating no derating
Tu-Wire
® 5 A 4 A 3.3 A
Fan controls
Quiet 3-speed 1.5 A no derating no derating
Fully variable 6 A 4.2 A 2.5 A
Fully variable 12 A 10 A 8.3 A
Electronic tapswitches
2
VETS-1000- 1000 W 800 W 650 W
VETS-1000-SL- 1000 W 900 W 700 W
VETN-1000- 1000 VA 700 VA 550 VA
Derating Table 2
Architectural | Vareo
®, Nova Tb®
173
www.lutron.com | 1.800.523.9466 |
Appendix | Multi-ganging and deratingAppendix | Multi-ganging and derating
Appendix | Ganging and derating
174
www.lutron.com | 1.800.523.9466 |
Appendix | Lighting load interfaces
*Consult Lutron Technical Support for information on interfaces with Vierti.
UL listed for FULL wattage indicated (derate capacity only if ganged with other devices).
Vareo
®
pg. 20
Nova Tb®
pg. 26
Nova
®
pg. 34
Centurion®
pg. 42
Vierti®*
pg. 14
Dimmer capabilities and
interface requirements
M
Multi-location—true dimming from each location
E
eco-model available
Compatible dimmer (no interface)
WBX
TVI
3F
PA
Requires interface, see notes below
WBX
WBX
WBX
WBX
WBX WBXWBX
WBX
WBX
WBX
WBX
WBX WBX
WBX WBX
WBX WBX
WBX
WBX
3F
3F
3F
3F 3F 3F
PA
TVITVI
W B X : Wallbox Phase Adaptive Power Module
(PHPM-WBX-DV-WH)
3 F : Fluorescent Power Module
(PHPM-3F-DV-WH)
T V I : 0-10 V Interface
(GRX-TVI)
P A : Phase Adaptive Power Module
(PHPM-PA-DV-WH)
See pgs. 178–179 for specific compatible dimmer models and switching interface solutions.
Dimmers capacity
M
Incandescent/halogen 120 V 600 W
M
1000 W
M
1500 W
2000 W
Magnetic low-voltage 120 V 600 VA (450 W)
1000 VA (800 W)
1500 VA (1200 W)
2000 VA (1600 W)
Magnetic low-voltage 277 V 600 VA (450 W)
1000 VA (800 W)
Electronic low-voltage 120 V 300 W
4 5 0 W
6 0 0 W
Electronic low-voltage 277 V 16 A
Neon/cold cathode
3-wire ballasts and Hi-lume
® LED driver 120 V 6 A
Hi-lume, Hi-lume Compact SE, 8 A
Eco-10
® and EcoSystem® ballasts 16 A
3-wire ballasts and Hi-lume LED driver 277 V 6 A
Hi-lume, Hi-lume Compact SE, 8 A
Eco-10 and EcoSystem ballasts
16 A
Tu-Wire
® ballasts 120 V 5 A
0-10 VDC (ballasts or LED Drivers) 120/277 V 16 A
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29

Lutron CA-1PSH-WH User manual

Category
Dimmers
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI