4 Push the alignment tool onto your
phone until it snaps into place.
5 Use tab #1 to peel the backing lm o
the screen protector, then discard the
lm.
6 Align the top of the screen protector with
the alignment tool, then press it down from
top to bottom to adhere it to the screen.
7 Remove the alignment tool.
8 If there are bubbles, press them out toward
the edges of the screen protector.
9 Reattach your phone case (if needed), then
remove ngerprints with the polishing cloth.
LIFETIME LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
For customer service, call 877-467-4289 (U.S.
and Canada) or 01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its aliated companies
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2020 Best Buy. All rights reserved.
V1 ENGLISH 20-0330
Alignment
tool
Screen
protector
Alignment
tool
Insignia Glass Screen Protector_QSG_20-0330_V1_EN.ai 2 6/24/2020 2:19:42 PMInsignia Glass Screen Protector_QSG_20-0330_V1_EN.ai 2 6/24/2020 2:19:42 PM