5
3D ViEWiNGPRECAUTIONS
I. importantSafetyinstructionsfor3DViewing
• If you or any viewer experiences the following symptoms
or any other discomfort from viewing 3D video images,
stop viewing and contact your health care provider:
Convulsions, Eye or muscle twitching, Loss of
awareness, Altered vision, Involuntary movements,
Disorientation, Eye Strain, Nausea/Vomiting, Dizziness,
Headaches, or Fatigue.
• If you feel eye fatigue or other discomfort from viewing
3D video images, stop viewing and take a rest until the
condition is eliminated.
• Due to the possible impact on vision development, viewers
of 3D video images should be age 6 or above. Children
and teenagers may be more susceptible to health issues
associated with viewing in 3D and should be closely
supervised to avoid prolonged viewing without rest.
• Avoid use of the 3D function when underthe influence of
alcohol.
• Watching the screen while sitting too close for an
extended period of time may cause eye strain. Consult
your display manual to determine the ideal viewing
distance.
• Viewing in 3D may cause dizziness and/or disorientation
for some viewers. Therefore, to avoid injury do not place
your player or display near open stairwells, balconies, or
wires and do not sit near objects that could be broken if
accidentally hit.
• Carefully read instructions provided with your display
and/or 3D glasses before 3D viewing.
II. 3D Performance issues
• This product is designed to playback Blu-rayTM Discs
that comply with the 3D specifications of Blu-ray
DiscTM Association. It is not compatiblewith other 3D
specifications.
• 3Dcapabledisplay,3D eyewearand HighSpeedHDMITM
cable (all sold separately) required for playback and
viewing3Dcontent,
• If you route yoursignal through anAV receiveror other
video distribution device they must be 3D capable
to support 3D viewing. Viewing HD content and up-
converting DVDcontent may require an HDCPcapable
inputonyour displaydevice.
• Becausethe Blu-rayTM format and 3D specificationsuse
new technologies, certain disc, content, connection
and other compatibility and/or performance issuesare
possible. If you experiencesuch issues, pleaserefer to
support,toshiba.cornfor information on the availability
of firmware updatesthat may resolve your problem, or
contactToshibaCustomerSolutions.
Bin-ray 3DTM
• Viewingof 3D contentrequires compatible3Dglasses,
compatible3D display, compatible 3D playback device
or 3D sourceand/or 3D capableHDMITM cable(all sold
separately).
• Someviewersmayexperienceaseizureor blackoutwhen
exposedto certainflashing imagesor lights containedin
certain 3D television pictures or video games.Anyone
who has had a seizure, loss of awareness, or other
symptom linkedto anepilepticcondition, or has afamily
history of epilepsy,shouldcontacta healthcare provider
beforeusingthe 3Dfunction.
• BD LiveTM requires connection of a USB drive of at
least 1 GB (sold separately) to USB port. For models
without built-in Wi-FP'_,BDLiveTM is only supported via
Ethernet so when using single USB port for Internet
access, BD Live will not be available. Performance
of interactive features may vary due to disc design or
content,and may also require analways-on broadband
Internet connection. Firmwareupdate may be required
for some interactivefeatures.Somefeatures mayrequire
additional bandwidth.Internetservicesareavailableonly
in the UnitedStates.
• While watching the 3Dvideo,all analogcomponentand
compositesignalsare blockedautomatically.
• All 3D signals are output only, using an HDMITM cable
through the HDMI OUTport.
• As the video resolution in 3D play mode is fixed
accordingto the resolutionofthe original 3D video,you
cannotchangethe resolutionto your preference.
• You must use a high-speed HDMITM cable for proper
output ofthe 3D signal.
• Youcannot usethis product for switching a2D content
to 3D.
USA
Federal Communications Commission Siatement
FCCCompliance Statement
This device complies with Part 15 of the FCC Rules.
Operationis subject to the following two conditions: (1)
This device may not cause harmful interference,and (2)
Thisdevicemustacceptanyinterferencereceived,including
interferencethat may causeundesiredoperation
Interferen#e
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules, These limits are designed to provide
reasonable protection against hamlful interference in a
residential installation, This equipment generates, uses,
and can radiate radio frequency energy and. if not installed
and used in accordance with the instructions, may cause
harmful flTterference to radio communications, Howevei;
there is i70 guarantee that interference will not occur in a
particular installation, If this equipment does cause hamlful
flTterference to radio or television reception, which can be
detemlflTed by tumflTg the equipment off anfl 017,the user is
encouraged to try to correct the flTterference by one of the
following measures:
. Reorientorrelocatethereceivingantenna.
. Increase the separation between the equipment and
receive_
. ConnecttheequipmentflTtoanoutletonacircuitdifferent
from that to which the receiver is connected,
. Consult the dealer or an experienced radio/7-V technician
for help.