TOOLS NEEDED FOR INSTALL:
1. Marker
2. Power Drill
PARTS:
Chevy 3100 1945-54
2016Door Panel Installation Guide
STEP 1: Place Template on door
and mark designated holes.
STEP 2: Use 19/32 Drill bit and power
Drill to make new clip locations.
STEP 3: Insert Clips into Door
Panel in designated locations.
Push in and twist until locked in
place.
STEP 4:
Set Door Panel into place
by aligning the clips up over the holes.
Once aligned you can push each clip into
its hole untill you feel/ hear a “snap”.
TEMPLATE
DOOR PANEL
CLIPS
3
1 2
4
PN: 99-3100-000
QP: 09-309 Rev.01
3. 19/32 bit
Step 5: Repeat steps 1-4 on the opposite
side.
/
