2. Toro
  3. Dingo Reflector Kit, Compact Tool Carrier

Toro Dingo Reflector Kit, Compact Tool Carrier Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Toro Dingo Reflector Kit, Compact Tool Carrier Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
FormNo.3444-558RevA
Dingo
®
ReectorKit
CompactToolCarrier
ModelNo.144-7107
InstallationInstructions
InstallingtheReector
PreparingtheMachine
1.Parkthemachineonalevelsurfaceinawarm
area.
2.Lowertheattachments.
3.Engagetheparkingbrake.
4.Shutofftheengineandremovethekey.
5.Waitforallmovingpartstostop.
6.Ifthemachineiscold,allowthesteelsurfaces
atthebackofthemachine(Figure1andFigure
2)towarm.
g345324
Figure1
TX427andTX525Machines
g345322
Figure2
TX1000Machines
InstallingtheDecal
TX427andTX525Machines
1.Usealcoholandacleanragtowipecleanthe
mountingsurfaceoftherear-supportcover
whereyouwillapplythereectordecal(Figure
3).
g345324
g345323
Figure3
1.Rearaccesscover
4.10mm(3/8inch)
2.Rear-supportcover
5.3mm(1/8inch)—outboard
ofrearaccesscover
3.Reectordecal
©2020—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420Registeratwww.T oro.com.
OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved
*3444-558*
2.Ensurethatthedecalmountsurfaceofthe
supportcoverisdry.
3.Removethebackingfromthereectordecal.
4.Adherethedecaltotherear-supportcoveras
showninFigure3.
5.Repeatsteps1through4attheother
rear-supportcover.
InstallingtheDecal
TX1000Machines
1.Usealcoholandacleanragtowipecleanthe
mountingsurfaceofthetankplatewhereyou
willapplythereectordecal(Figure4).
g345322
g345321
Figure4
1.13mm(1/2inch)—inboard
ofbendradius
3.Reectordecal
2.13mm(1/2inch)
4.Tankplate
2.Ensurethatthedecalmountsurfaceofthetank
plateisdry.
3.Removethebackingfromthereectordecal.
4.Adherethedecaltothetankplateasshownin
Figure4.
5.Repeatsteps1through4attheothertankplate.
2
/