Marantz MM7055/U1B User manual

Service

Manual

•

Some illustrations using in this service manual are slightly different from the actual set.

•

Please use this service manual with referring to the operating instructions without fail.

•

For purposes of improvement, specications and design are subject to change without notice.

5 Channel Power Amplier

MM7055 /

N1B/U1B/K1B

d

MM7055

S0322-0V04M/DG1108

WARNING: Violators will be prosecuted to the maximum extent possible.

Ver. 4

Please refer to the

MODIFICATION NOTICE.

2

MARANTZ DESIGN AND SERVICE

Using superior design and selected high grade components,

MARANTZ

company has created the ultimate in stereo sound.

Only original

MARANTZ

parts can insure that your

MARANTZ

product will continue to perform to the speciﬁ cations for

which it is famous.

Parts for your

MARANTZ

equipment are generally available to our National Marantz Subsidiary or Agent.

ORDERING PARTS :

Parts can be ordered either by mail or by Fax.. In both cases, the correct part number has to be speciﬁ ed.

The following information must be supplied to eliminate delays in processing your order :

1. Complete address

2. Complete part numbers and quantities required

3. Description of parts

4. Model number for which part is required

5. Way of shipment

6. Signature : any order form or Fax. must be signed, otherwise such part order will be considered as null and void.

In case of difﬁ culties, do not hesitate to contact the Technical

Department at above mentioned address.

091105DM/DG

USA

MARANTZ AMERICA, INC

100 CORPORATE DRIVE

MAHWAH, NEW JERSEY 07430

USA

EUROPE / TRADING

D&M EUROPE B. V.

P. O. BOX 8744, BUILDING SILVERPOINT

BEEMDSTRAAT 11, 5653 MA EINDHOVEN

THE NETHERLANDS

PHONE : +31 - 40 - 2507844

FAX : +31 - 40 - 2507860

KOREA

D&M SALES AND MARKETING KOREA LTD.

2F,YEON BLDG.,

88-5, BANPO-DONG, SEOCHO-GU,

SEOUL KOREA

PHONE : +82 - 2 - 715 - 9041

FAX : +82 - 2 - 715 - 9040

CANADA

D&M Canada Inc.

5-505 APPLE CREEK BLVD.

MARKHAM, ONTARIO L3R 5B1

CANADA

PHONE : 905 - 415 - 9292

FAX : 905 - 475 - 4159

JAPAN

D&M BUILDING, 2-1 NISSHIN-CHO,

KAWASAKI-KU, KAWASAKI-SHI,

KANAGAWA, 210-8569 JAPAN

D&M Holdings Inc.

CHINA

D&M SALES AND MARKETING SHANGHAI LTD.

ROOM.808 SHANGHAI AIRPORT CITY TERMINAL

NO.1600 NANJING (WEST) ROAD, SHANGHAI,

CHINA. 200040

TEL : 021 - 6248 - 5151

FAX : 021 - 6248 - 4434

SHOCK, FIRE HAZARD SERVICE TEST :

CAUTION : After servicing this appliance and prior to returning to customer, measure the resistance between either primary

AC cord connector pins (with unit NOT connected to AC mains and its Power switch ON), and the face or Front Panel of

product and controls and chassis bottom.

Any resistance measurement less than 1 Megohms should cause unit to be repaired or corrected before AC power is applied,

and veriﬁ ed before it is return to the user/customer.

Ref. UL Standard No. 60065.

NOTE ON SAFETY :

Symbol z Fire or electrical shock hazard. Only original parts should be used to replaced any part marked with symbol z .

Any other component substitution (other than original type), may increase risk of ﬁ re or electrical shock hazard.

z

3

SAFETY PRECAUTIONS

The following check should be performed for the continued protection of the customer and service technician.

LEAKAGE CURRENT CHECK

Before returning the unit to the customer, make sure you make either (1) a leakage current check or (2) a line to chassis

resistance check. if the leakage current exceeds 0.5 milliamps, or if the resistance from chassis to either side of the

power cord is less than 460 kohms, the unit is defective.

Be sure to test for leakage current with the AC plug in both polarities, in addition, in each power ON, OFF and STANDBY

mode, if applicable.

CAUTION

Please heed the points listed below during servicing and inspection.

Heed the cautions!

Spots requiring particular attention when servicing, such

as the cabinet, parts, chassis,etc., have cautions indicated

on labels. be sure to heed these causions and the

cautions indicated in the handling instructions.

Caution concerning electric shock!

(1) An AC voltage is impressed on this set, so touching

internal metal parts when the set is energized could

cause electric shock. Take care to avoid electric

shock, by for example using an isolating transformer

and gloves when servicing while the set is energized,

unplugging the power cord when replacing parts, etc.

(2) Tere are high voltage parts inside. Handle with extra

care when the set is energized.

Caution concerning disassembly and

assembly!

Through great care is taken when manufacturing parts

from sheet metal, there may in some rare cases be burrs

on the edges of parts which could cause injury if ﬁ ngers

are moved across them. Use gloves to protect your hands.

Only use designated parts!

The set's parts have specific safety properties (fire

resistance, voltage resistance, etc.). For replacement

parts, be sure to use parts which have the same

poroperties. In particular, for the important safety parts

that are marked

z

on wiring diagrams and parts lists, be

sure to use the designated parts.

Be sure to mount parts and arrange the wires

as they were originally!

For safety seasons, some parts use tape, tubes or other

insulating materials, and some parts are mounted away

from the surface of printed circuit boards. Care is also

taken with the positions of the wores omsode amd clamps

are used to keep wires away from heating and high

voltage parts, so be sure to set everything back as it was

originally.

Inspect for safety after servicing!

Check that all screws, parts and wires removed or

disconnected for servicing have been put back in their

original positions, inspect that no parts around the area

that has been serviced have been negatively affected,

conduct an inslation check on the external metal

connectors and between the blades of the power plug,

and otherwise check that safety is ensured.

(Insulation check procedure)

Unplug the power cord from the power outlet, disconnect

the antenna, plugs, etc., and turn the power switch on.

Using a 500V insulation resistance tester, check that the

inplug and the externally exposed metal parts (antenna

terminal, headphones terminal, input terminal, etc.) is

1MΩ or greater. If it is less, the set must be inspected and

repaired.

Many of the electric and structural parts used in the set

have special safety properties. In most cases these

properties are difficult to distinguish by sight, and using

replacement parts with higher ratings (rated power and

withstand voltage) does not necessarily guarantee that

safety performance will be poreserved. Parts with safety

properties are indicated as shown below on the wiring

diagrams and parts lists is this service manual. Be sure to

replace them with parts with the designated part number.

(1) Schematic diagrams ......Indicated by the

z

mark.

(2) Parts lists ......Indicated by the

z

mark.

Using parts other than the designated

parts could result in electric shock, ﬁ res

or other dangerous situations.

CAUTION

Concerning important safety

parts

4

NOTE FOR SCHEMATIC DIAGRAM

WARNING:

Parts marked with this symbol

z

have critical characteristics. Use ONLY replacement parts recommended by the manufacture

r.

CAUTION:

Before returning the unit to the customer, make sure you make either (1) a leakage current check or (2) a line to chassis resistance check. If the

leakage current exceeds 0.5 milliamps, or if the resistance from chassis to either side of the power cord is less than 460 kohms, the unit is defective.

WARNING:

DO NOT return the unit to the customer until the problem is located and corrected.

NOTICE:

ALL RESISTANCE VALUES IN OHM. k=1,000 OHM / M=1,000,000 OHM

ALL CAPACITANCE VALUES IN MICRO FARAD. P=MICRO-MICRO FARAD EACH VOLTAGE AND CURRENT ARE MEASURED AT NO SIGNAL

INPUT CONDITION. CIRCUIT AND PARTS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.

NOTE FOR PARTS LIST

The suppliers and their type numbers of fusible resistors

are as follows;

1. KOA Corporation

Part No. (MJI) Type No. (KOA) Description

00MNH05

×

140 RF25S

×

Ω

J (±5% 1/4W)

00MNH05

×

120 RF50S

×

Ω

J (±5% 1/2W)

00MNH85

×

110 RF73B2A

×

Ω

J (±5% 1/10W)

00MNH95

×

140 RF73B2E

×

Ω

J (±5% 1/4W

)

2. Matsushita Electronic Components Co., Ltd

Part No. (MJI) Type No. (MEC) Description

00MNF05

×

140 ERD-2FCJ

×

(±5% 1/4W)

00MRF05

×

140

00MNF02

×

140

ERD-2FCG

×

(±2% 1/4W)

00MRF02

×

140

Examples ;

Resistance value

0.1

Ω

.....001 10

Ω

.....100 1k

Ω

..... 102 100k

Ω

.... 104

0.5

Ω

.....005 18

Ω

.....180 2.7k

Ω

..... 272 680k

Ω

.... 684

1

Ω

.....010 100

Ω

.....101 10k

Ω

..... 103 1M

Ω

.... 105

6.8

Ω

.....068 390

Ω

.....391 22k

Ω

..... 223 4.7M

Ω

.... 475

NOTE ON FUSE :

Regarding to all parts of parts code 00MFS20xxx2xx, replace

only with Wickmann-Werke GmbH, Type 372 non glass type fuse.

NOTE ON SAFETY FOR FUSIBLE RESISTOR :

Resistance value

(0.1

−

10k

Ω

)

Resistance value

ANT. : ANTENNA BATT. : BATTERY

CAP. : CAPACITOR CER. : CERAMIC

CONN. : CONNECTING DIG. : DIGITAL

HP : HEADPHONE MIC. : MICROPHONE

μ-PRO : MICROPROCESSOR REC. : RECORDING

RES. : RESISTOR SPK : SPEAKER

SW : SWITCH

TRANSF.

: TRANSFORMER

TRIM. : TRIMMING TRS. : TRAMSISTOR

VAR. : VARIABLE X’TAL : CRYSTAL

NOTE ON SAFETY :

Symbol z Fire or electrical shock hazard. Only original parts

should be used to replaced any part marked with symbol z.

Any other component substitution (other than original type), may

increase risk of ﬁ re or electrical shock hazard.

z

ABBREVIATION AND MARKS

}

PARTS INFORMATION

RESISTORS

1) 00MGD05

× × ×

140, Carbon ﬁ lm ﬁ xed resistor, ±5% 1/4W

2) 00MGD05

× × ×

160, Carbon ﬁ lm ﬁ xed resistor, ±5% 1/6W

Examples ;



Resistance value

0.1

Ω

.....001 10

Ω

.....100 1k

Ω

..... 102 100k

Ω

..... 104

0.5

Ω

.....005 18

Ω

.....180 2.7k

Ω

..... 272 680k

Ω

..... 684

1

Ω

.....010 100

Ω

.....101 10k

Ω

..... 103 1M

Ω

..... 105

6.8

Ω

.....068 390

Ω

.....391 22k

Ω

..... 223 4.7M

Ω

..... 475

Note : Please distinguish 1/4W from 1/6W by the shape of parts

used actually.

CAPACITORS

CERAMIC CAP.

3) 00MDD1

×

370, Ceramic capacitor

Disc type

Temp.coeff.P350 N1000, 50V

Examples ;



Tolerance (Capacity deviation)

±0.25pF...... 0

±0.5pF...... 1

±5%...... 5

Tolerance of COMMON PARTS handled here are as follows :

0.5pF 5pF .....±0.25pF

6pF 10pF .....±0.5pF

12pF 560pF .....±5%



Capacity value

0.5pF .....005 3pF .....030 100pF ..... 101

1pF .....010 10pF .....100 220pF ..... 221

1.5pF .....015 47pF .....470 560pF ..... 561

C

ERAMIC CAP.

4) 00MDK16

× × ×

300, High dielectric constant ceramic

capacitor

Disc type

Temp.chara. 2B4, 50V

Examples ;



Capacity value

100pF .....101 1000pF ..... 102 10000pF .....103

470pF .....471 2200pF ..... 222

ELECTROLY CAP. ( )

5) 00MEA

× × × × × ×

10, Electrolytic capacitor

One-way lead type, Tolerance ±20%

Examples ;



Capacity value

0.1μF .....104 4.7μF .....475 100μF ... 107

0.33μF .....334 10μF .....106 330μF ... 337

1μF .....105 22μF .....226 1100μF ... 118

2200μF ... 228



Working voltage

6.3V .....006 25V .....025

10V .....010 35V .....035

16V .....016 50V .....050

FILM CAP. ( )

6) 00MDF15

× × ×

350 Plastic ﬁ lm capacitor

00MDF15

× × ×

310 One-way type, Mylar ±5% 50V

00MDF16

× × ×

310 Plastic ﬁ lm capacitor

One-way type, Mylar ±10% 50V

Examples ;



Capacity value

0.001μF (1000pF) ...........102 0.1μF .... 104

0.0018μF ...........................182 0.56μF .... 564

0.01μF ...........................103 1μF .... 105

0.015μF ...........................153



}





Capacity value

Tolerance



Capacity value

Resistance value

 

Working voltage

Capacity value



Capacity value

}

060522 MZ

5

TECHNICAL SPECIFICATIONS

DIMENSION

384

21.5

440

183

362

170

13

n MM7055

Rated power output

(from 20 Hz to 20 kHz/THD = 0.08 %,

two channels driven):

140 W/ch, 8 Ω

170 W/ch, 6 Ω

Maximum effective output power

(from 1 kHz, two channels driven):

210 W/ch, 6 Ω

Output bandwidth (8 Ω load, 0.09 %): 5 Hz – 40 kHz

Frequency response (1 W, 8 Ω): 8 Hz – 100 kHz (±3 dB)

Damping factor: 100

Input sensitivity/impedance: 1.2 V / 22 kΩ (UNBALANCED)

2.4 V / 30 kΩ (BALANCED)

Signal-to-noise ratio (IHF-A): 105 dB

Voltage ampliﬁ cation level: 29 dB

Supply voltage (for U1B): AC 120 V, 60 Hz

Supply voltage (for N1B): AC 230 V, 50 Hz

Power consumption: 660 W

Standby power: 0.2 W

Maximum external dimensions: 440 (W) x 183 (H) x 384 (D) mm

Weight: 15.7 kg

6

DISASSEMBLY

• Disassemble in order of the arrow of the ﬁ gure of following ﬂ ow.

• In the case of the re-assembling, assemble it in order of the reverse of the following ﬂ ow.

• In the case of the re-assembling, observe "attention of assembling" it.

• If wire bundles are untied or moved to perform adjustment or parts replacement etc., be sure to rearrange them neatly

as they were originally bundled or placed afterward.

Otherwise, incorrect arrangement can be a cause of noise generation.

FRONT PANEL ASSY

Refer to "DISASSEMBLY

1. FRONT PANEL ASSY"

and "EXPLODED VIEW"

FRONT PCB ASS'Y-1

(Ref. No. of EXPLODED VIEW : C1)

FRONT PCB ASS'Y-2

(Ref. No. of EXPLODED VIEW : C2)

FRONT PCB ASS'Y-3

(Ref. No. of EXPLODED VIEW : C10)

INPUT PCB-2

Refer to "DISASSEMBLY

5. INPUT PCB-2"

and "EXPLODED VIEW"

INPUT PCB-2

(Ref. No. of EXPLODED VIEW : C15)

INPUT PCB-1

Refer to "DISASSEMBLY

6. INPUT PCB-1"

and "EXPLODED VIEW"

INPUT PCB-1

(Ref. No. of EXPLODED VIEW : C14)

POWER PCB ASSY

Refer to "DISASSEMBLY

7. POWER PCB ASSY"

and "EXPLODED VIEW"

POWER PCB ASSY

(Ref. No. of EXPLODED VIEW : C17)

TRANS

Refer to "DISASSEMBLY

3. TRANS"

and "EXPLODED VIEW"

TRANS

(Ref. No. of EXPLODED VIEW : C5)

AMP UNIT

Refer to "DISASSEMBLY

8. AMP UNIT"

and "EXPLODED VIEW"

AMP PCB ASS'Y-1

(Ref. No. of EXPLODED VIEW : C11)

AMP PCB ASS'Y-2

(Ref. No. of EXPLODED VIEW : C12)

TOP COVER

CPU PCB ASS'Y

Refer to "DISASSEMBLY

2. CPU PCB ASS'Y"

and "EXPLODED VIEW"

CPU PCB ASS'Y

(Ref. No. of EXPLODED VIEW : C7)

STBY.PCB ASS'Y-2

Refer to "DISASSEMBLY

4. STBY.PCB ASS'Y-2"

and "EXPLODED VIEW"

STBY.PCB ASS'Y-2

(Ref. No. of EXPLODED VIEW : C6)

7

About the photos used for descriptions in the DISASSEMBLY" section.

• The direction from which the photographs used herein were photographed is indicated at "Direction of photograph: ***"

at the left of the respective photographs.

• Refer to the table below for a description of the direction in which the photos were taken.

• Photographs for which no direction is indicated were taken from above the product.

1. FRONT PANEL ASSY

2. CPU PCB ASS'Y

3. TRANS

4. STBY.PCB ASS'Y-2

The viewpoint of each photograph

(Photografy direction)

View from above

Front side

Direction of photograph: B

Direction of photograph: D

Direction of photograph: C

Direction of photograph: A

TOP COVER

FRONT PANEL ASSY

Proceeding :

Please refer to "EXPLODED VIEW" for the disassembly method of each PCB included in FRONT PANEL ASSY and

FRONT PANEL ASSY.

TOP COVER

CPU PCB ASS'Y

Proceeding :

Please refer to "EXPLODED VIEW" for the disassembly method of CPU PCB ASS'Y.

TOP COVER

CPU PCB ASS'Y TRANS

Proceeding :

Please refer to "EXPLODED VIEW" for the disassembly method of TRANS.

TOP COVER

STBY.PCB ASS'Y-2

Proceeding :

Please refer to "EXPLODED VIEW" for the disassembly method of STBY.PCB ASS'Y-2.

8

5. INPUT PCB-2

(1) Disconnect the connector wire.

(2) Remove the screws.

TOP COVER

INPUT PCB-2

Proceeding :

CN52

Direction of photograph: A

9

6. INPUT PCB-1

(1) Disconnect the connector wire.

(2) Remove the screws.

7. POWER PCB ASSY

TOP COVER

INPUT PCB-2 INPUT PCB-1

Proceeding :

BN51

Direction of photograph: A

TOP COVER

INPUT PCB-2 INPUT PCB-1 POWER PCB ASS'Y

Proceeding :

Please refer to "EXPLODED VIEW" for the disassembly method of POWER PCB ASS'Y.

10

8. AMP UNIT

(1) Remove the screws.

(2) Remove the screws.

TOP COVER

INPUT PCB-2 INPUT PCB-1 AMP UNIT

Proceeding :

View from bottom

Direction of photograph: C

11

(3) Disconnect the connector wires, then remove the screws.

(4) Disconnect the connector wire.

CN21

BN41

CN15,CN16,CN17,CN18,CN19

CN31

CN21

CN13

Please refer to "EXPLODED VIEW" for the disassembly method of each PCB included in AMP UNIT.

12

SPECIAL MODE

Special mode setting button

s

b

Enters the special mode when A button is pressed in normal power state.

No. Mode Button A Contents

1 Service mode Service

CPU version displayed.

and

Furthermore,this unit in a condition of the following by pushing the Button A.

1-1 Protection Log display Service Displayed protection history.

1-2 Exit from protection state

Service

(Hold button more

than 5 seconds.)

Displayed protection history and move to normal mode.

2

Factory mode Factory

Cooling FAN actived .

and

Furthermore,this unit in a condition of the following by pushing the Button A.

2-1

AVSS output checking mode Factory AVSS, H/L check mode

2-2

Destination Switching

checking mode

Display Display and changing destination.

2-3 Auto standby conﬁ rm mode.

Display

+

ON/STANDBY

Go to standby mode condition with after 15 seconds.

• no signal

• no operation

• no command (RC)

2-4 Initialize mode

ON/STANDBY

Initialize

V3

(D405)

V2

(D406)

V1

(D407)

FACTORY

botton

(SW401)

SERVICE

botton

(SW402)

CPU Version / Protection Log

Indication LED

13

1. CPU Version check

The ﬁ rmware version is displayed on LEDs as follows.

V1(D407) V2(D406) V3(D405) Version

ON OFF OFF Ver1

OFF ON OFF Ver2

ON ON OFF Ver3

OFF OFF ON Ver4

ON OFF ON Ver5

OFF ON ON Ver6

ON ON ON Ver7

1.1. Protection Log display

The last time protection log is displayed on LEDs as follows if the Service button is pushed(>5sec) in the Service

mode. For detail and coping process, please refer to “SYSTEM ERROR”.

V1(D407) V2(D406) V3(D405) Cause of protect

OFF OFF OFF No protection log

OFF OFF ON Detection of over current over 200msec on Power AMP

OFF ON OFF Detection of DC on Power Amp output

OFF ON ON -

ON OFF OFF

Detection of over current below 200msec on Power

Amp

ON OFF ON

Detection of abnormality on +/-38V, +/-15V supply

or power amp supply

ON ON OFF Detection of abnormal heat of Power Amp

ON ON ON -

14

2. Cooling FAN active

The fan rotates according to the condition of the temperature sensor(IC406,407,408) as follows.

T :IC406,407 and 408 temperature Fan rotate

T < 0°C STOP

0°C T 10°C Rotate Low speed

10°C T Rotate High speed

2.1. AVSS H/L Switching

The AVSS relay High/Low switching cyclic if the Factory button is pushed in the factory mode.

If not changing, there is an error in the AVSS relay circuit (RY14,15 on Power pcb).

This is effective only in factory mode.

2.2. Destination Switching

The destination changes cyclic if the DISPLAY button is pushed for ﬁ ve seconds in the factory mode.

For conﬁ rmation, The Auto Standby LED lights as follows.

The difference by destination is only a Auto Standby function.

Destination Auto standby function

Auto standby LED

(factory mode only)

N (Europe) Enable Lights

Others (NA/Japan) Disable Blinking 500msec interval

2.3. Auto Standby Function conﬁ rm mode

When press DISPLAY button(ﬁ rst) + ON/STANDBY button(second) together, enters Auto Standby Function conﬁ rm

mode.

From this state, if there is no audio input/operation/command for 15 seconds, changes in the state of the standby.

If not changing, there is an error in the auto standby detect circuit (IC510,511,512 on Bal input pcb).

2.4. Initialize

Initializes following setting if the ON/STANDBY button is pushed in the factory mode.

Contents After initialized

Auto Standby Mode Not change

Illumination LED On/Off On

Protection log No protection log

15

3. SYSTEM ERROR

The reason for the error can be presumed from Standby LED display when the error occurs and protection log display.

Refer to [1-1.] for the method of conﬁ rming protection log.

If the AC power supply is turned off, the state of all protection can be released.

Error Detection

Protection log

display

Reason Check Point

V1

D407

V2

D406

V3

D405

Standby LED Blinking

125msec interval

(Fast Blinking)

ON OFF ON

Detection of abnormality on +/-38V, +/-

15V supply or power amp supply

(_P LINE FAIL)

Connection

POWER PWB : BN12- 4pin

CPU PWB : CN41 - 4pin

CPU (IC402) 45pin _P LINE FAIL :

0V : Fail 5V : Normality

There is a possibility that ± 38 V supply or

P-AMP power supply is broken.

Power Amp

Supply Power

POWER PWB :

IC13,IC14,D109,RY14,RY15

,F101,F102,D110-D113

OFF OFF ON

Detection of over current over 200msec

on Power AMP

(_P CUR FAIL)

Connection

AMP PWB : CN95 - 4pin,

CN94-8pin

CPU PWB :BN41 - 8pin.

CPU (IC402) 38pin _P CUR FAIL :

0V : Fail 5V : Normality

There is a possibility that Power AMP is

broken.

Power Amp

Check Power AMP circuit

(AMP PWB)

Standby LED Blinking

500msec interval

(Slow Blinking)

ON OFF OFF

Detection of over current below 200msec

on Power Amp

(_P CUR FAIL)

Connection

AMP PWB : CN95 - 4pin,

CN94-8pin

CPU PWB :BN41 - 8pin.

CPU (IC402) 38pin _P CUR FAIL :

0V : Fail 5V : Normality

Power Amp

Check Power AMP circuit

(AMP PWB)

OFF ON OFF

Detection of DC on Power Amp output

(_P AMP FAIL) Connection

AMP PWB :CN95 - 5pin,

CN94-9pin

CPU PWB : BN41 - 9pin

Main-CPU (IC402) 41pin _P AMP FAIL :

0V : Fail 5V : Normality

Power Amp

Check Power AMP circuit

(AMP PWB)

ON ON OFF

Detection of abnormal heat of Power Amp

(_HEAT DET P) Connection

AMP PWB : CN94 - 10pin

CPU PWB : BN41 - 10pin

Main-CPU (IC402) 24pin

0V : Fail 5V : Normality

Posistor TH91,TH92

OFF OFF OFF No protection log

VERSION UPGRADE PROCEDURE OF FIRMWARE

ABOUT REPLACE THE MICROPROCESSOR WITH A NEW ONE

When replaced of the U-PRO (Microprocessor), conﬁ rm contents of the following.

PWB Name Ref. No. Description

After

replaced

Remark

12336Z-A IC402

R5F21246SNFP C

After replaced

A : Mask ROM (With software). No need write-in of software to the microprocessor.

B : Flash ROM (With software). Usually, no need write-in of software. But, when the software was updated, you should

be write-in of the new software to the microprocessor or ﬂ ash ROM. Please check the software version.

C : Empty Flash ROM (Without software). You should be write-in of the software to the microprocessor.

Refer to “Update procedure” or “writing procedure”, when you should be write-in the software.

[A] Update CPU's software to internal Flash-ROM.

• This mode is to update the software for microprocessor.

• The target devise is internal ﬂ ash ROM of microprocessor (IC402) on CPU PWB (12336Z-A).

• The updating of software takes about 20 seconds.

• The software is common by MM7055 and MM7025.

Necessary Equipment

The following items are required for updating.

• Windows PC (OS: Windows2000 or WindowsXP) with Serial port.

• RS-232C Dsub-9 pin cable (female to female/straight type)

• Update software to CPU. (FlashSta.exe, MM7055_7025_yymmddvv.mot and MM7055_7025_yymmddvv.id in CPU

(MM7055_7025) folder)

• DATA UPDATE KIT (part no. 90M-SR4500JIG)

Use DATA UPDATE KIT to connect PC and CN44 (FFC connector) in rear panel of the unit, when updating CPU

Update CPU’s software to internal Flash-ROM

(1) Disconnect the mains cord from the unit

(2) Connect PC and the DATA UPDATE KIT with the RS-232C cable. And connect FFC (upside contact) to the connector

(CN44) into the rear panel of the unit from the DATA UPDATE KIT.

(3) Connect the mains cord into the unit.

(4) Press the POWER ON/OFF button for turn on the unit. Then the STANDBY LED do not turn on a light.

(5) Put the CPU (MM7055_7025) folder into anywhere on your PC’s hard disc.

16

(6) Double click the CPU (MM7055_7025) folder.

(7) Double click the FlashSta.exe. And launch the M16C Flash Start.

(8) Check the internal ﬂ ash memory in the Select Program.

Choose the COM Port number. And the click OK.

17

(9) Click the Refer....

(10) Choose the MM7055_7025_yymmddvv.mot. And click Open.

NOTE : The yy is two digit of year. The mm is month. The dd is date. The vv is version.

(11) The FilePath and ID are inputted automatically, and the MCU Type is selected to R8C automatically.

Click the OK.

18

(12) Click the Setting....

(13) Choose the 57600 in the Baud rate. (DO NOT choose the other one.)

Choose the 40 in Program_intervals(ms). Click the OK.

19

(14) Click the E.P.R....

(15) Click the OK.

(16) Software is written into the internal Flash-ROM of CPU.

The updating of software takes about 20 seconds.

20

Page is loading ...

Marantz MM7055/U1B, MM7055/K1B, MM7055/N1B User manual

Related papers

Other documents