ALERTUS USB PB Installation guide

USB PB

Installation/Guide

This guide provides typical installation instructions.

Version number: 000001

USB PB Installation/Guide

This guide provides typical installation instructions. Please bear in mind that building codes vary and the technician

installing the Panic Button units is responsible for compliance with any relevant codes.

Specifications

● Dimensions: 0.79" H x 2.61" W x 1.97" D,

● Under-the-counter mounted.

● Colors: Red, Blue, or White

● USB Connected

Installation Kit

● Panic Button with 6 ft. long USB cable

Due to differences in installation styles and locations, it is the responsibility of the

customer to supply the #4 screws to physically install the Panic Button.

General Mounting Guidelines

Recommended locations for installing Panic Buttons include:

1) Per ADA standards do not mount lower than 3.5 ft or higher than 4.5

ft above finished floor

2) In common areas

3) Under Administrative desks

Mounting the Panic Button

The Panic Button can be mounted under a desk for security reasons.

Use #4 screws to install the Panic Button into place.

Connecting to the Computer

Plug the USB end into an empty USB slot of the Computer.

Testing

Testing will be administered after Panic Button Configuration is complete.

Appendix: Dimensional Drawings