AIC ADSL2+ Expansion card
ALU-Dm 606-I
Copyright© Version 4.0 Alcatel-Lucent Enterprise
Alcatel-Lucent Enterprise
Manual
AIC ADSL2+ Expansion card 1
Legal Notice
Warranty
This publication is subject to change.
ALU offers no warranty whatsoever for information contained in this manual.
ALU is not liable for any direct, indirect, collateral, consequential or any other damage connected to the delivery, sup-
ply or use of this manual.
Manual Alcatel-Lucent Enterprise
2 AIC ADSL2+ Expansion card
Table of Contents
Chapter 1 About This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.1 Supported Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.2 Warnings and notes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.3 Who should read this manual? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.4 What is in this manual? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.5 How is the information organized? . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.6 Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.7 Related documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Chapter 2 AIC ADSL2+ Expansion Card . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2.1 AIC ADSL2+ expansion card: Characteristics. . . . . . . . . . . . . . . . . . . . . . . . 3
2.2 AIC ADSL2+expansion card: Connectors . . . . . . . . . . . . . . . . . . . . . . . . . 4
Chapter 3 Installing the AIC ADSL2+ Expansion Cards . . . . . . . . . . . . . . . . . . . 5
3.1 Requirements prior to installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3.1.1 Determining the firmware file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3.2 Installing or replacing the AIC ADSL2+ expansion card . . . . . . . . . . . . . . . . . . . 5
Chapter 4 LEDs and connector Pinouts: Description . . . . . . . . . . . . . . . . . . . . . 6
4.1 AIC ADSL2+ expansion card: LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
4.2 Connector Pinouts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
4.2.1 RJ-11 connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Appendix A Safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
A.1 Translated Safety Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Alcatel-Lucent Enterprise
Table of Contents
AIC ADSL2+ Expansion card i
Table of Contents Alcatel-Lucent Enterprise
ii AIC ADSL2+ Expansion card
Chapter 1 About This Guide
This installation guide contains the step by step instructions that you need to follow in order to correctly install, unin-
stall and replace the AIC ADSL2+ expansion cards in the OA58XX router family.
1.1 Supported Devices
The information contained in this installation guide only applies to the AIC ADSL2+ expansion cards.
1.2 Warnings and notes
Observe the warnings and instructions given in this manual to avoid and prevent injuries or damage during installa-
tion and maintenance. Please follow the security procedures and guidelines when working near electrical equipment.
The warnings and notes are provided in each chapter as appropriate.
1.3 Who should read this manual?
This manual should be read by installers and network administrators who need to install, configure or maintain net-
works. This guide assumes that the installer is familiar with network electronics and technologies.
1.4 What is in this manual?
This installation guide contains the following information:
• A description of the general characteristics of the AIC ADSL2+ expansion cards.
• A description of the steps to carry out to install the AIC ADSL2+ cards in the OA58XX routers.
• A description of the AIC expansion card LEDs and the pinouts for their connectors.
1.5 How is the information organized?
This document aims to provide all the information necessary for installing the AIC ADSL2+ expansion cards in the
OA58XX router family.
• AIC ADSL2+ expansion card characteristics.
• AIC ADSL2+ expansion card connectors.
• Requirements prior to installation.
• Installing the AIC ADSL2+ expansion cards.
1.6 Technical Support
Alcatel-Lucent Enterprise technical support is committed to resolving our customer’s technical issues in a timely
manner. Customers with inquiries should contact us at:
Contact information:
North America 800-995-2696
Latin America 877-919-9526
EMEA +800 00200100 (Toll Free) or +1(650)385-2193
Asia Pacific +65 6240 8484
Web: service.esd.alcatel-lucent.com
Alcatel-Lucent Enterprise
1 About This Guide
AIC ADSL2+ Expansion card 1
Email: esd.suppor[email protected]
1.7 Related documentation
ALU-Dm 741-I – ADSL-VDSL2.
ALU-Dm748-I Software Updating.
ALU-DM693-I OA58XX Installation
ALU-Dm605-I Installation of AIC expansion card for the OA58XX .
The manufacturer reserves the right to make changes and improvements to the appropriate features in both
the software and hardware of this product, modifying the specifications of this manual without prior notice.
The images presented on the front and back panels of the devices are provided as information guidelines
only. Some small modifications may exist in the actual device.
1 About This Guide Alcatel-Lucent Enterprise
2 AIC ADSL2+ Expansion card
Chapter 2 AIC ADSL2+ Expansion Card
The AIC ADSL2+ expansion card allows you to connect to an ADSL2+ network.
ADSL2+ is a technology that offers transfer rates that are noticeably faster than those provided by conventional AD-
SL. So, if through ADSL we have maximum downstream rates of 8/1 Mbps, with ADSL2+ we achieve 24/2 Mbps. In
addition to an improved bandwidth, this standard contemplates a series of implementations that improve the supervi-
sion of the connection and the quality of services demanded through the line.
For further information on ADSL technology, please see manual “ALU-Dm 741 – ADSL-VDSL2” .
Fig. 1: AIC ADSL2+ Card
2.1 AIC ADSL2+ expansion card: Characteristics
The main characteristics of the AIC ADSL2+ expansion card are as follows:
AIC ADSL2+ card: Characteristics
Ports 1 RJ11 ADSL/ADSL2+ port; Annex A (POTS), Annex B (ISDN)
Standards ANSI
• T1.413 Issue 2
ITU
• G.992.1 (G.DMT):
Annex A. “Full Rate ADSL over POTS”
Annex B. “Full Rate ADSL over ISDN”
• G.992.2 (G.Lite): “Lite ADSL over ISDN”
• G.992.3 (ADSL2):
Annex A: “ADSL2 over POTS”
Annex B: “ADSL2 over ISDN”
Annex L: “RE-ADSL2 with extended upstream
over POTS”
• G.992.5(ADSL+):
Annex A: “ADSL+ over POTS”
Annex B: “ADSL+ over ISDN”
Annex M: “ADSL+ with extended upstream
Alcatel-Lucent Enterprise
2 AIC ADSL2+ Expansion Card
AIC ADSL2+ Expansion card 3
over POTS”
Downstream rate 27 Mbps
Upstream rate 3 Mbps
Other characteristics SELT (“Single Ended Line Testing”):
• ITU G.996.2 recommendation
Dying Gasp:
• ITU G.991.2 recommendation
2.2 AIC ADSL2+expansion card: Connectors
Figure 2 shows the front board of the AIC ADSL2+ card.
Fig. 2: Front of the AIC ADSL2+ card
The front board elements are as follows:
Elements Table for the Front of the AIC ADSL2+card
Item Description
A RJ11 ADSL Connector for POTS and ISDN
2 AIC ADSL2+ Expansion Card Alcatel-Lucent Enterprise
4 AIC ADSL2+ Expansion card
Chapter 3 Installing the AIC ADSL2+ Expansion Cards
This chapter provides information on how to install and uninstall the AIC ADSL2+ expansion cards in OA58XX
routers.
This information includes:
• Requirements prior to installation.
• Installing or replacing a AIC ADSL2+ expansion card.
3.1 Requirements prior to installation
In order to configure the card, you must have access to the OA58XX routers through a console or a Telnet connec-
tion. For further information, please see the section on “Connecting for configuration” found in the ALU-DM693-I
OA58XX Installation.
So that the AIC cards operate properly, you need to load the appropriate firmware file for each card in the router.
If the firmware has not been loaded in the device prior to installing the card, you can determine what firmware file you
need.
3.1.1 Determining the firmware file
We have two options to determine the firmware file needed for the installed AIC card:
3.1.1.1 FTP “quote site listfirmwares” command
The FTP command “quote site listfirmwares” returns a list containing the names of the firmware files needed so the
device operates correctly:
ftp> quote site listfirmwares
211 fw000008.bfw
ftp>
3.1.1.2 The “system firmwares-required” Monitoring command
The “system firmwares-required ” monitoring command displays the same information as the previous command
but in the local console:
+system firmwares-required
List of required firmwares for detected hardware
------------------------------------------------
Filename Description
-------------- ---------------------------------------------------
fw000008.bfw Conexant Titanium Ultra Plus ADSL2+
+
Once the necessary firmware file has been detected, you need to load it in the device through an FTP connection.
For further information on how to load firmware files in the router, please see manual “ ALU-Dm748-I Updating Soft-
ware”.
3.2 Installing or replacing the AIC ADSL2+ expansion card
To install or replace a AIC ADSL2+ card, please see the AIC cards installation generic manual corresponding to the
OA58XX router model where the installation is being carried out.
Alcatel-Lucent Enterprise
3 Installing the AIC ADSL2+ Expansion Cards
AIC ADSL2+ Expansion card 5
Chapter 4 LEDs and connector Pinouts: Description
This chapter provides information on the AIC ADSL2+ expansion card LEDs and the connector pinouts.
4.1 AIC ADSL2+ expansion card: LEDs
The AIC ADSL2+ expansion card doesn’t have any LEDs of its own.
4.2 Connector Pinouts
The AIC ADSL2+ expansion card has one RJ11 connector.
4.2.1 RJ-11 connector
Figure 3 shows the RJ-11 connector pinouts.
Fig. 3: RJ-11 connector Pinouts
Table 3 shows the information associated to each connector pinout.
RJ-11 Connection Pinouts
RJ-11 pinouts Signal
1 --
2 --
3 TIP
4 RING
5 --
6 --
We recommend that you use a 26 AWG cable, at the very least. This may be supplied with the card itself or be de-
scribed in the safety instructions.
Warning
To reduce the risk of fire, only use a 26 AWG cable or a cable with a larger diameter.
4 LEDs and connector Pinouts: Description Alcatel-Lucent Enterprise
6 AIC ADSL2+ Expansion card
Appendix A Safety information
A.1 Translated Safety Warnings
!"#$ %&'('!) *'%+ ,"%-./01&1&'2 '%-".)(34!1 !".)+" +/#1.) '.' +/#1.)
#".)617" 8'/01!*/
9 : ; < = ; > ? @
9 A B
Alcatel-Lucent Enterprise
Safety information
AIC ADSL2+ Expansion card 7
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Alcatel-Lucent AIC 2 User manual
-
-
-
-
-
-
-
-
-