Page 3
Figure 1
Figure 1Figure 1
Figure 1
Unpack and lay parts on
clean, padded surface like
carpet or blanket. Check
that you have all parts
indicated on the front page.
Step 1 Attach support bar
(B) to the side frame (A)
using Short bolt (1) and
long bolt (2). Tighten with
Allen wrench (3).
Figure
Figure Figure
Figure 2
22
2
Step 2 Attach mirror frame
(C) to the pre-assembled
unit from step 1 by using
screw ball (5) and plastic
washer (4).
Please be sure the washers