ADDER AdderLink XD150FX Quick Start
- Category
- Car kits
- Type
- Quick Start
Welcome
Thank you for choosing the AdderLink XD150FX extender modules. Using ber optic links, these
compact modules allow you to transfer multiple connections (including dual link DVI-D and HD video)
up to 4 kilometers from a host computer.
The high grade screening employed within the metal cased enclosures combined with the immunity
from interference of the ber optic links make the AdderLink XD150FX modules highly suitable for
use in ‘noisy’ industrial environments.
AdderLink XD150FX
Quick Start
What’s in the box
• Transmitter and receiver modules
• 2 x Power adapters with locking connectors and country specic power cords
• 2 x matched SFP ber optic modules (multi-mode SFP-MM-LC-4G or single-mode SFP-SM-LC-4G)
• Combined dual-link DVI-D video plus USB cable (2m)
• 2 x 3.5mm jack audio cables (3m)
• Information wallet
continued overleaf
Transmitter module
(connect to host computer)
Receiver module
(connect to console peripherals)
PWR
A D D E R L I N K
FX
USB VIDLNK
www.adder.com
PWR
A D D E R L I N K
FX
USB VIDLNK
www.adder.com
LINK
Accessing the management application
AdderLink XD150FX modules generally congure themselves automatically, collecting EDID
information from the attached monitor and passing it to the host computer. In most cases the modules
will begin working together correctly as soon as they are connected. Where conguration changes are
required (or remote monitoring is required), the management application provides an intuitive user
interface.
To access the management application
1 Use a computer that is directly or indirectly (i.e. via a network switch) connected to the Ethernet
management port on the XD150FX transmitter module.
2 Run a web browser on your computer and enter the IP address of the transmitter module. Run a
web browser on your computer and enter the IP address of the transmitter module. By default, the
IP address is set to 192.168.1.22. If required, you can change the default IP address or alternatively,
choose automated address selection by DHCP server.
3 If requested, enter the registered user name and password to log on (the default user name and
password are ‘admin’ and ‘password’ respectively).
The Dashboard page should be displayed, which shows a real-time representation of the XD150FX
installation.
Use the menu on the left side to display other pages.
Use the Online Support option to make contact with Adder through the main website.
© 2016 Adder Technology Limited • All trademarks are acknowledged.
Part No. MAN-QS-XD150FX-ADDER_V1.0a
Web: www.adder.com
Contact: www.adder.com/contact-details
Support: www.adder.com/support
Warranty
Adder Technology Ltd warrants that this product shall be free from defects in workmanship and materials for a period of two years from the date
of original purchase. If the product should fail to operate correctly in normal use during the warranty period, Adder will replace or repair it free
of charge. No liability can be accepted for damage due to misuse or circumstances outside Adder’s control. Also Adder will not be responsible for
any loss, damage or injury arising directly or indirectly from the use of this product. Adder’s total liability under the terms of this warranty shall in
all circumstances be limited to the replacement value of this product. If any difculty is experienced in the installation or use of this product that
you are unable to resolve, please contact your supplier.
Transmitter module
(connect to host computer)
OPTIONS
12V 1.5A
INDOOR USEONLY
USB
port
Audio
line in
jack
Options
port
(RS232)
Audio
line out
jack
Ethernet
management
port
DVI-D dual-link
video input
port
12VDC
power
port
OPTIONS
12V 1.5A
INDOOR USEONLY
LINK
SFP
module
slot
Audio
line in
jack
Options
port
(RS232)
Audio
line out
jack
2 x
USB ports
DVI-D dual-link
video output
port
12VDC
power
port
PWR
A DDERLINK
FX
USB VIDLNK
www.adder.com
LINK
SFP
module
slot
Status
indicators
Recessed
reset
button
FRONT
REAR
REAR
Status indicators (both modules)
LNK On once the ber optic link is
established. Flashes if a non-approved
SFP module is inserted.
USB On once the USB link is established.
Flashes if USB enters suspend mode.
VID On once the video signal is detected.
PWR On when power is applied.
PWR
A D D E R L I N K
FX
USB VIDLNK
LINK
12V 1.5A
INDOOR USE ONLY
LINK
SFP
module
SFP
module
Fiber optic
link
Receiver
Transmitter
Receiver module
(connect to console peripherals)
IMPORTANT
Ensure that power is isolated when connecting
and disconnecting items, particularly when
inserting or removing SFP modules.
PWR
A DDERLINK
FX
USB VIDLNK
www.adder.com
Headphone
jack
Microphone
jack
Status
indicators
2 x USB
ports
FRONT
Recessed reset button
-
1
-
2
ADDER AdderLink XD150FX Quick Start
- Category
- Car kits
- Type
- Quick Start
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
ADDER AdderLink XD150FX User manual
-
ADDER XD150FX Owner's manual
-
-
-
-
-
ADDER AdderLink Infinity Manager User manual
-
-
-
