Ultratec CrystalTone Ringer Training manual
- Type
- Training manual
TRAINING GUIDE FOR
CrystalTone Ringer
™
VOLUME
TONE
RING PATTERN
October 2007
TABLE OF CONTENTS
Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Overview & Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Parts List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
For the Trainer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2 CrystalTone Ringer
™
Training Guide
The CrystalTone Ringer™ is an extra loud ringer that alerts people to an incoming telephone call. It is
ideal for people who have difficulty hearing the phone ringing or people who work in a noisy environment
who need to be alerted to incoming phone calls.
The CrystalTone ringer is not a telephone. It connects to the telephone line and emits an extra loud ring
tone whenever an incoming call is detected.
INTRODUCTION
3 CrystalTone Ringer
™
Training Guide
VOLUME
TONE
RING PATTERN
Telephone line jacks
Volume slide control
Ring Tone slide control
Ring Pattern selector
Ring Indicator
Ring On/Off button
The CrystalTone Ringer has several features to make hearing the telephone ring as carefree as possible:
Volume Control: The ring volume is adjustable, and can be set as loud as 95dB. Slide the volume
control to the right to increase the ring volume, slide the volume control to the left to
decrease the volume.
On/Off: Turns the loud ringer on and off. The telephone will still ring (at its regular volume)
when the CrystalTone Ringer is turned off.
Ring Indicator: This light on the CrystalTone ringer lights up when a call comes in.
Tone Control: The adjustable Tone Control lets you set the ring frequency to different levels, to find a
sound frequency that works best for your own hearing situation. Some people hear
higher pitched sounds better than lower pitched sounds. Slide the Tone control to the
right for a higher-pitched ring.
Ring Patterns: You can select from for distinct ring patters, by moving the Ring Pattern selector.
Try various ring patterns and tone settings to find the combination that is best for
your individual hearing level.
FEATURES
OVERVIEW
Please verify that the following are enclosed with your new CrystalTone Ringer.
• 7-foot telephone line cord
• 2, plastic wall anchors
• 2, screws
PARTS LIST
4 CrystalTone Ringer
™
Training Guide
Step 1 – Selecting the Location
CAUTION! Do not plug the CrystalTone Ringer into any telephone line other than a typical, analog
telephone line. Connection to a digital system may damage the ringer or the telephone system and will void
your warranty.
Set up the CrystalTone Ringer in a place where: (a) There is a phone jack nearby. Cords should not lie
across any walkway. (b) The surface that the ringer is set on, or mounted to, is stable and secure. (c) The
area is protected from excessive heat or humidity.
Step 2 – Setting up the CrystalTone Ringer
Placing on a desktop
1. Plug the telephone line cord into the telephone line jack on the bottom of the
CrystalTone Ringer and the other end into the wall phone jack.
2. Set the CrystalTone Ringer on a sturdy surface such as a desk. It may be
placed on its side or flat.
Mounting on a Wall
Use the previous instructions with the following exceptions:
1. Select a spot within a few inches of the wall phone jack.
2. Using the template below, drill 2 holes that are 2.3 inches apart. Use a
3
/16
"
drill bit.
3. With a hammer, tap the plastic wall anchors into holes until flush with wall.
4. Using a Phillips head screw driver, insert screws into the anchors until head
of screw is
1
/4
"
from wall.
5. Align holes on back of CrystalTone Ringer with screws and hang the ringer on the wall.
INSTALLATION
2.3 inches
Use
3
/16" drill bit.
5 CrystalTone Ringer
™
Training Guide
Physical Dimensions
Size: 6.4" x 1.6" x 4.1"
Weight: 11 oz.
Controls
On/Off
Ring Volume
Ring Pattern
Ring Tone
Indicator Lights
Ring Flasher
Connections
Plugs into a standard, analog
telephone line (RJ11/CA11A).
Ring Volume
Up to 95 dB
Approvals
FCC approved
FCC registration number:
D8KUSA-40098-KX-N
REN: 1.0B
Safety: CSA NRTL\C both US and
Canada
Industry Canada: 721 10620A
SPECIFICATIONS
1. Read and understand all instructions.
2. Follow all warnings and instructions on the CrystalTone Ringer.
3. For indoor use only.
4. Unplug the CrystalTone Ringer from the wall outlet before cleaning. Do not use liquid or aerosol
cleaners. Use a damp cloth for cleaning.
5. Do not use the CrystalTone Ringer near water, for example, near a bath tub, in a wet basement or near
a swimming pool.
6. Do not place the CrystalTone Ringer on an unstable surface.
7. Do not allow anything to rest on the telephone cord. Do not locate the CrystalTone Ringer where people
can walk on the cord.
8. To reduce the risk of electric shock, do not disassemble the CrystalTone Ringer. Take it to a qualified
service person when service
or repair work is required. Opening the unit or incorrect re-assembly can expose you to dangerous
voltages or other risks. The CrystalTone Ringer does not have any user-serviceable parts.
9. Unplug the CrystalTone Ringer from the wall outlet and refer servicing to qualified service personnel
under the following conditions: (a) If liquid has been spilled into the ringer. (b) If the ringer has been
exposed to rain or water. (c) If the ringer does not operate normally. Adjust only those controls that
are covered by the operating instructions. Improper adjustment of other controls may result in damage.
(d) If the ringer has been dropped and/or damaged. (e) If the ringer exhibits a distinct change in
performance.
SAFETY INSTRUCTIONS
6 CrystalTone Ringer
™
Training Guide
1. The CrystalTone Ringer is designed to work with a standard analog telephone line, as is commonly
found in most households or with
many fax machines. The CrystalTone
Ringer
is NOT designed to work
with high-speed cable modems, fiber optic, or digital telephone lines. The exception: users CAN hook the
CrystalTone Ringer up to a DSL (digital subscriber line) line ONLY if there is an analog filter on the line.
2.
The
CrystalTone Ringer
draws its power from the telephone line, so there is no need to plug an electrical
adapter into a wall power outlet.
FOR THE TRAINER
-
1
-
2
-
3
-
4
-
5
-
6
Ultratec CrystalTone Ringer Training manual
- Type
- Training manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Ultratec Telephone 305-009901 User manual
-
-
-
-
-
-
-
-
-