USB 3.0 to SATA 6G Adapter - OTB

one touch backup

Art-Nr: 7070022

www.m-cab.de

Product Introduction

The USB 3.0 to SATA 6G Adapter is the easiest solution for connecting any SATA

storage device to the latest USB 3.0 or the ubiquitous USB 2.0 ports. This USB 3.0

to SATA 6G Adapter is also compatible with SATA optical storage, making this

adapter a very handy accessory for both Notebook, Desktop, server or any

- Compliant with Serial ATA Specification, Revision 3.0

- Bus bandwidth of Serial ATA up to 6Gbps

- Supports ATA/ATAPI Packet Command Set

- Support ATA/ATAPI LBA48 addressing mode

- Supports both SATA 2.5’’ and SATA 3.5’’ hard drives

- Supports SATA ATAPI Optical Drives

- LED to indicate drive power and activity

- One Touch Backup file or data

System Requirements

- Windows® XP/Vista/7 (32/64 bit)

- 1 x Power Adapter (Optional)

Hardware Installation

- Connect SATA data/power connector to 2.5’’ or 3.5’’ SATA device.

- Plug the power adapter into the power jack of the USB 3.0 to SATA 6G Adapter.

- Plug the USB 3.0 to SATA 6G Adapter into your computer’s SuperSpeed USB 3.0 port.

Driver Installation

Windows will automatically detect and install the drivers for the USB 3.0 to

SATA 6G Adapter.

Specifications are subject to change without prior notice. All tradenames referenced are registered namework of their respective owners.

Page 1

Utility Installation

1. Place the Fnet PCClone EX Lite Utility CD into a CD-ROM and setup should

Right click “PC Clone EX” icon in the notification area, then select “Help” option in the

pop-up menu.

Specifications are subject to change without prior notice. All tradenames referenced are registered namework of their respective owners.

Page 2